070-660 덤프 Microsoft 인증 시험

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Microsoft 070-660인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Microsoft 070-660인증시험을 패스할 수 있다는 것을 보장합니다.

ITExamDump에서 발췌한 Microsoft인증 070-660덤프는 전문적인 IT인사들이 연구정리한 최신버전 Microsoft인증 070-660시험에 대비한 공부자료입니다. Microsoft인증 070-660 덤프에 있는 문제만 이해하고 공부하신다면Microsoft인증 070-660시험을 한방에 패스하여 자격증을 쉽게 취득할수 있을것입니다.

Microsoft 인증 070-660시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.

시험 번호/코드: 070-660

시험 이름: Microsoft (TS:Windows Internals)

IT인증자격증은 여느때보다 강렬한 경쟁율을 보이고 있습니다. Microsoft 인증070-660시험을 통과하시면 취직 혹은 승진이나 연봉협상에 많은 도움이 되어드릴수 있습니다. Microsoft 인증070-660시험이 어려워서 통과할 자신이 없다구요? ITExamDump덤프만 있으면 이런 고민은 이제 그만 하지않으셔도 됩니다. ITExamDump에서 출시한 Microsoft 인증070-660덤프는 시장에서 가장 최신버전입니다.

070-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-660.html

NO.1 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of an application. This application runs at a customer's site. Because
of heap corruption, the application crashes intermittently. In order to enable yourself to check and resolve
the heap corruption, you ask the customer to have full page heap enabled on the application process. You
receive a user dump file from the customer. What you should do is to make it clear at the time that the
user dump was created, whether the full page heap was enabled. Of the following WinDbg commands,
which one should be used?
A.!vm should be used.
B.!gflag should be used.
C.!heap should be used.
D.!verifier should be used.
Answer:B

Microsoft   070-660   070-660

NO.2 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are writing a user application that runs on Windows Server 2003. According to the
company requirement, a user application is being written by you. This application runs on Windows
Server 2003. User authentication is need by the design specification for the application. You must make
sure that each time the application is started, a local user name and password is entered by users. So
which routine should be used?
A.CredUIParseUserName()should be used.
B.LsaRegisterLogonProcess()should be used.
C.CredReadDomainCredentials() should be used.
D.CredUIPromptForCredentials()should be used.
Answer:D

Microsoft   070-660   070-660

NO.3 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, you are debugging a Windows device driver. An
unexpectedly long delay occurs on the device driver. You locate the problem in the following
synchronization mechanism. kd> dt var_sema Local var @ 0xf9dfbc48 Type _KSEMAPHORE +0x000
Header : _DISPATCHER_HEADER +0x010 Limit : 2 kd> dt nt!_DISPATCHER_HEADER f9dfbc48
+0x000 Type : 0x5 '' +0x001 Absolute : 0xe6 '' +0x002 Size : 0x5 '' +0x003 Inserted : 0xbb '' +0x004
SignalState : 0 +0x008 WaitListHead : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] kd> dt
nt!_KWAIT_BLOCK 0x819ca438 +0x000 WaitListEntry : _LIST_ENTRY [ 0xf9dfbc50 - 0xf9dfbc50 ]
+0x008 Thread : 0x819ca3c8 _KTHREAD +0x00c Object : 0xf9dfbc48 +0x010 NextWaitBlock :
0.819ca480 _KWAIT_BLOCK +0x014 WaitKey : 0 +0x016 WaitType : 1 kd> dt nt!_KWAIT_BLOCK
0xf9dfbc50 +0x000 WaitListEntry : _LIST_ENTRY [ 0x819ca438 - 0x819ca438 ] +0x008 Thread :
0.00000002 _KTHREAD +0x00c Object : 0xfd050f80 +0x010 NextWaitBlock : 0xffffffff _KWAIT_BLOCK
+0x014 WaitKey : 0 +0x016 WaitType : 0 You have to find out the number of threads that the semaphore
currently has waiting. How many threads does the semaphore currently have waiting?
A.0
B.1
C.2
D.4
E.5
Answer:B

Microsoft최신덤프   070-660 pdf   070-660   070-660

NO.4 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You are in charge of a multithreaded application. Now is being tested by you. You have
to use Perfmon to test the application for heap leaks. Of the following counters, which one should be
monitored?
A.Process\Private Bytes
B.Memory\Available Bytes
C.Memory\Committed Bytes
D.Process\Pool Paged Bytes
Answer:A

Microsoft   070-660자료   070-660최신덤프

NO.5 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. For a hardware device, you are developing a Windows device driver. You will install the
device driver and hardware device on computers that run Windows Server 2008. Now you have to find out
the amount of time that the processor uses to receive and process interrupts. Which of the following tools
should be used?
A.You should choose to use Pview.exe
B.You should choose to use Taskmgr.exe
C.You should choose to use Eventvwr.msc
D.You should choose to use Perfmon.msc
Answer:D

Microsoft   070-660시험문제   070-660   070-660   070-660 dump   070-660최신덤프

NO.6 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. According to the company requirement, an I/O dispatch routine is being written by you
for a Windows device driver. buffered I/O is supported by the device driver. 1 KB of data to the user
process is transferred by the dispatch routine. The kernel address of the 1-KB buffer needs to be retrieved
from the I/O request packet (IRP). Which field of the IRP contains the kernel address?
A.Irp->UserBuffer
B.Irp->Overlay.UserApcContext
C.Irp->Tail.Overlay.DriverContext[0]
D.Irp->AssociatedIrp.SystemBuffer
Answer:D

Microsoft인증   070-660 pdf   070-660   070-660

NO.7 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a colleague named Jason in the company. He has a computer named C01. C01
runs Windows Vista. He finds that a service process is using 100 percent of the processor. He has to
force a process dump of the service, meanwhile the service is consuming 100 percent of the processor.
He has no idea about which tool he should use. Since you are the technical support, he asks for your
answer. So which of the following tools should be used?
A.He should choose to use Umdh.exe
B.He should choose to use Tlist.exe
C.He should choose to use Pview.exe
D.He should choose to use Adplus.vbs
Answer:D

Microsoft   070-660덤프   070-660   070-660   070-660

NO.8 You are the IT professional who work in an International company named Wiikigo. You are
experienced in troubleshooting operating systems and applications that are not working correctly,
identifying code defects and so on. You have enough knowledge on windows internals and you provide
technical support for the company. You are in charge of an application service. Because of heap
corruption, it crashes intermittently. When it occurs, you have to detect the heap corruption. Of the
following tolls, which one should be used?
A.You should choose to use Page Heap
B.You should choose to use Special Pool
C.You should choose to use driver Verifier
D.You should choose to use Memory Pool Monitor
Answer:A

Microsoft   070-660인증   070-660

NO.9 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. There is a computer named c01. Windows Server 2008 is run by C01. Now you are
using WinDbg to debug C01. You find that one thread is waiting for a critical section. This section is
owned by another thread. You have to locate the critical section. Of the following WinDbg commands,
which one should be used?
A.You should choose to use.thread
B.You should choose to use !deadlock
C.You should choose to use!kdext.locks
D.You should choose to use!ntsdexts.locks
Answer:D

Microsoft자격증   070-660   070-660자료

NO.10 You are the IT professional who work in an International company named Wiikigo. You are experienced
in troubleshooting operating systems and applications that are not working correctly, identifying code
defects and so on. You have enough knowledge on windows internals and you provide technical support
for the company. You have a device driver that has one monitoring thread named ThreadA. The device
driver has three worker threads. They are respectively named ThreadB, ThreadC, and ThreadD. The
worker threads run every 10 seconds and complete within 1 second. If any worker thread does not run at
least once every 30 seconds, ThreadA calls KeBugCheckEx, and then a complete kernel crash dump is
generated. A bug check and a complete kernel dump are generated by the computer. You find the
following after you review the complete kernel dump: You have to find out the root cause of the bug check.
So what caused the bug check to occur?
A.It was caused by the state of ThreadA
B.It was caused by the priority of ThreadA.
C.It was caused by the priority of ThreadD
D.It was caused by the state of ThreadA and ThreadB
E.It was caused by the state of ThreadB and ThreadC
Answer:C

Microsoft   070-660 dumps   070-660시험문제

ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Microsoft 인증070-660 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. Microsoft 인증070-660 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.