ITExamDump에는 베터랑의전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이IBM인증000-314시험을 패스할 수 있을 자료 등을 만들었습니다, ITExamDump 에서는 일년무료 업뎃을 제공하며, ITExamDump 의 덤프들은 모두 높은 정확도를 자랑합니다. ITExamDump 선택함으로 여러분이IBM인증000-314시험에 대한 부담은 사라질 것입니다.
ITExamDump를 선택함으로, ITExamDump는 여러분IBM인증000-314시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.
ITExamDump의IBM인증 000-314덤프공부가이드에는IBM인증 000-314시험의 가장 최신 시험문제의 기출문제와 예상문제가 정리되어 있어IBM인증 000-314시험을 패스하는데 좋은 동반자로 되어드립니다. IBM인증 000-314시험에서 떨어지는 경우IBM인증 000-314덤프비용전액 환불신청을 할수 있기에 보장성이 있습니다.시험적중율이 떨어지는 경우 덤프를 빌려 공부한 것과 같기에 부담없이 덤프를 구매하셔도 됩니다.
IBM인증 000-314시험을 패스하는 지름길은ITExamDump에서 연구제작한 IBM 인증000-314시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 IBM 인증000-314시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. IBM 인증000-314시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의IBM 인증000-314시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.
시험 번호/코드: 000-314
시험 이름: IBM (IBM WebSphere Message Broker V6.1. System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 106 문항
업데이트: 2013-09-20
IBM 000-314인증시험이 이토록 인기가 많으니 우리ITExamDump에서는 모든 힘을 다하여 여러분이 응시에 도움을 드리겠으며 또 일년무료 업뎃서비스를 제공하며, ITExamDump 선택으로 여러분은 자신의 꿈과 더 가까워질 수 있습니다. 희망찬 내일을 위하여 ITExamDump선택은 정답입니다. ITExamDump선택함으로 당신이 바로 진정한IT인사입니다.
IBM인증000-314시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로IBM인증000-314시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도IBM인증000-314시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.IBM인증000-314시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.
우리의 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는IBM 000-314시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump는 여러분이 한번에IBM 000-314인증시험을 패스함을 보장 드립니다.
000-314 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-314.html
NO.1 In a new implementation of the WebSphere Message Broker (WMB), an insurance company has
decided that the Message Broker Explorer (SupportPac IS02) will be implemented. They have never used
JMS with WebSphere MQ. Which feature in the Message Broker Explorer requires MQ JMS configuration?
A.Adopt a new broker
B.Full service tracing
C.WebSphere DataPower Security Wizard
D.Connect to a remote configuration manager
Answer:C
IBM 000-314 000-314 000-314 000-314시험문제
NO.2 An administrator needs to control domain objects that are deployable. To which three objects is it
possible to grant the Deploy Access Control List (ACL) permission?
A.Broker
B.Topology
C.Root Topic
D.Subscription
E.Execution Group
F.Configuration Manager
Answer:A C E
IBM기출문제 000-314 000-314최신덤프 000-314
NO.3 A developer has built a flow that uses the EmailOutput node to send notifications of order shipments.
The SMTP server requires authentication with a specific user ID and password. What does the
administrator need to do before the developer attempts to deploy the flow?
A.Create a security identity with mqsisetdbparms.
B.Update the default SMTP configurable service with mqsiupdatebroker.
C.Create a SMTP configurable service with mqsicreateconfigurableservice.
D.Include the message set that contains the SMTP configuration information.
Answer:A
IBM덤프 000-314 dump 000-314 000-314 000-314
NO.4 The administration team has decided to retain control over the infrastructure but wants to allow the
developers to deploy flows at will in the development environment. The developers need to change trace
and debug properties of execution groups (EGs), but not brokers. Which Access Control List (ACL)
permissions do the developers require?
A.Full to the EGs
B.View to the Root and Edit to the EGs
C.View to the Brokers and Deploy to the EGs
D.Deploy to the Brokers and Edit to the EGs
Answer:A
IBM 000-314 000-314자료 000-314기출문제
NO.5 A developer is writing an application that needs to coordinate the processing of MQ messages and
database updates in a message flow for distributed systems. What does the broker administrator need to
configure as the XA Resource Manager?
A.The broker
B.The database
C.The queue manager
D.The operating system
E.The configuration manager
Answer:C
IBM 000-314 000-314 000-314
NO.6 A broker administrator needs to connect via the Configuration Manager Proxy API Exerciser to a
configuration manager running on Solaris which was configured using default settings and managing a
BRKR1 broker running on a Windows XP environment. What four selections need to be furnished to
successfully connect to the configuration manager?
A.Port number 1414
B.Configuration Manager name
C.BRKR1 queue manager name
D.Configuration Manager hostname
E.SYSTEM.BKR.CONFIG channel name
F.Configuration Manager queue manager name
G.SYSTEM.DEFAULT.BKR.CONFIG channel name
Answer:A D E F
IBM인증 000-314인증 000-314최신덤프
NO.7 A large bank has six brokers that are geographically dispersed. Three of the brokers are used in a
publish/subscribe collective while three are not. For backup purposes, the decision has been made to use
three cloned brokers. Which choice is the most appropriate?
A.Use only one broker in the collective as a clone.
B.Use all three of the brokers in the collective as the clones.
C.Make two brokers from the collective clones, in case one fails.
D.Use no brokers in the collective as clones, it is not permitted.
Answer:A
IBM 000-314덤프 000-314
NO.8 A broker domain has two brokers, BRK1 and BRK2, configured to a configuration manager CFGMGR.
A new set of applications wants to take advantage of the publish/subscribe topic-based security. Which
steps does the administrator need to perform?
A.Create a UserNameServer and run the mqsichangeproperties command on the brokers and the
configuration manager to include the UserNameServer name.
B.Run the command mqsichangeproperties command on the brokers and mqsichangeconfigmgr on the
configuration manager to activate Access Control List's on the topics.
C.Run the command mqsijoinmqpubsub against each application name and change all the brokers with
the mqsichangebroker command to enable the security option on topics.
D.Create a UserNameServer and run the mqsichangebroker command on the brokers and
mqsichangeconfigmgr on the configuration manager to include the UserNameServer queue manager
name.
Answer:D
IBM인증 000-314 000-314자격증 000-314인증
NO.9 A production broker in a large bank is being configured to allow WebSphere Application Server to be the
JMS provider. Defaults were used for directory paths during installation of the product. When creating a
JMSProvider configurable service for the WebSphere_WAS_Client, the administrator issues the following
command: mqsichangeproperties WBRK6_DEFAULT_BROKER -c JMSProviders -o
WebSphere_WAS_Client By default, where must the provider's Jar files be located on an AIX production
broker system?
A./var/mqsi/shared-classes
B./opt/IBM/mqsi/6.1/classes
C./var/mqsi/common/profiles
D./opt/IBM/mqsi/6.1/JMSProviders
Answer:A
IBM 000-314기출문제 000-314최신덤프 000-314덤프 000-314
NO.10 A broker administrator must set up policy set bindings for a new message flow. The flow includes the
following SOAP nodes: SOAPInput, SOAPAsyncRequest, SOAPAsyncResponse and SOAPReply. Which
two SOAP nodes result in the need for a consumer policy set binding definition?
A.SOAPInput
B.SOAPReply
C.SOAPAsyncRequest
D.SOAPAsyncResponse
Answer:C D
IBM덤프 000-314시험문제 000-314시험문제
NO.11 An administrator wants to quickly configure a broker to make use of HTTP over SSL on a development
environment with minimum configuration. Which property must be set by running the command
mqsichangeproperties?
A.port
B.keystorePass
C.keystoreFile
D.enableSSLConnector
Answer:D
IBM 000-314인증 000-314 000-314시험문제 000-314
NO.12 An application has a requirement that tables in the broker database be accessible with an ID that is not
the service ID of the broker using ODBC Data Source Names (DSN). What are the two tasks the
administrator needs to do?
A.Create an ODBC DSN to the broker database with mqsicreatedb.
B.Setup an ODBC DSN to the broker database with mqsi_setupdatabase.
C.Define an ODBC DSN to the broker database with another alias name.
D.Associate the application ID and password with the alias name with the mqsisetdbparms command.
E.Associate the application ID and password with the alias name with the mqsisetsecurity command.
Answer:C D
IBM인증 000-314기출문제 000-314
NO.13 A company's IT division has a broker domain consisting of a single broker BRK configured to
configuration manager CFGMGR. Both the components are running on a single AIX server. A new
security policy was put in place by the company which required all components to be started and stopped
under a new user ID. Which setup does the administrator need to perform to enable the broker and
configuration manager to be started or stopped with the new user ID?
A.Create a UserNameServer and add the new user ID.
B.Add the new user ID to mqm and mqbrkrs groups of the machine.
C.Run the mqsichangebroker command with the new user ID and password.
D.Run the mqsichangedbimgr command with the new user ID and password.
E.Run the mqsisetdbparms command adding the new user ID and password.
Answer:B
IBM시험문제 000-314 000-314 000-314
NO.14 A large enterprise is building several application message flows that include HTTPInput nodes. There is
a requirement to take advantage of WS-Security for the decryption of incoming messages to these flows
as well as encryption of data from the flows. The administrator needs to handle the necessary
configuration. What is the most efficient way to do this with the least impact on changing code or broker
configuration?
A.Use the IBM WebSphere MQ Internet Gateway.
B.Implement a WebSphere DataPower appliance.
C.Set up IBM WebSphere Transformation Extender for Integration Servers.
D.Create a new broker on a separate system using it to front-end all the security.
Answer:B
IBM최신덤프 000-314덤프 000-314 000-314 000-314최신덤프
NO.15 A large utility company has decided to implement messaging using WebSphere MQ with WebSphere
Message Broker (WMB) V6.1. The production broker will be hosted on the z/OS system where Resource
Recovery Service (RRS) has been configured and is active. What must the administrator do to ensure all
transactional message flows will be globally coordinated on this production broker?
A.Nothing.
B.Ensure the message flow is configured as a coordinated transaction in the bar file.
C.In the bar file, ensure the Transaction mode setting for the MQInput node is properly set to "Yes" and all
other Transaction modes are set to "Automatic".
D.Configure DB2 for XA coordination; configure the queue manager for XA coordination; and ensure the
message flow is configured as a coordinated transaction in the bar file.
Answer:A
IBM덤프 000-314 000-314 000-314
NO.16 Files in the specified input directory are not being processed by a flow that uses a FileInput node. The
error messages indicate that the file nodes cannot continue executing (BIP3331). What is the cause of the
error messages?
A.The file is locked during this directory scan.
B.The input file exceeds the maximum file size.
C.The broker does not have the required access to these files and directories.
D.There is more than one instance of this message flow deployed to this computer.
Answer:C
IBM pdf 000-314인증 000-314 dumps 000-314 dump 000-314자료
NO.17 A company has its broker BRK running on machine brk.comp.com under the queue manager BRKQM
listening at port 1414. It is registered to configuration manager CFGMGR running on machine
cfg.comp.com under the queue manager CFGQM listening at port 1420. An administrator is entrusted
with the task of creating an execution group EXE1 under the broker BRK. Which command should be run
to achieve this task?
A.mqsicreateexecutiongroup -i brk.comp.com -q CFGQM -b BRK -e EXE1
B.mqsicreateexecutiongroup -i cfg.comp.com -n CFGMGR -b BRK -e EXE1
C.mqsicreateexecutiongroup -i cfg.comp.com -p 1420 -q CFGQM -b BRK -e EXE1
D.mqsicreateexecutiongroup -i brk.comp.com -p 1414 -q BRKQM -b BRK -e EXE1
Answer:C
IBM자료 000-314 000-314 pdf 000-314기출문제
NO.18 An administrator has set up topic-based security as shown in the Exhibit. Which user(s) will have
access to perform publish action on the topic TopicA/TopicY/TopicM?
A.Only user1
B.Only user2
C.Only user3
D.Both user1 and user3
Answer:A
IBM dump 000-314 dump 000-314 000-314 dump
NO.19 Under a load test in the Pre-PROD environment, the performance test has shown that the broker
cannot sustain the required peak number of HTTP connection requests. What is an appropriate action?
A.Create another Execution Group and deploy another copy of the flow.
B.Change the httplistener component parameter '-n maxThreads' to a higher value.
C.Increase the number of 'Additional Instances' of the flow and redeploy the flow.
D.Increase the number of 'Additional Instances' of the HTTPInput node and redeploy the flow.
Answer:B
IBM 000-314 000-314기출문제 000-314 pdf
NO.20 As part of the migration from WebSphere Message Broker (WMB) V6.0 to V6.1, a developer has
provided the administrator a list of Java user-defined nodes that need to be migrated. The migration will
be from WMB V6.0 on one machine to WMB V6.1 on a different machine. Which three steps need to be
performed?
A.Clean the project in the Package Explorer.
B.Import the user-defined node project into the V6.1 Toolkit.
C.Use Rational Product Updater (RPU) to perform the migrations.
D.Run mqsimigratecomponents specifying the user Jar files directory.
E.Store the .pdb file in the directory specified by the -l parameter on the mqsichangebroker command.
F.Store the .jar file in the directory specified by the -l parameter on the mqsichangebroker command.
Answer:A B F
IBM 000-314덤프 000-314시험문제
ITexamdump의 1z0-559덤프의 VCE테스트프로그램과 CAT-380덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MB7-701시험에 대비한 고품질 덤프와 MB5-854시험 최신버전덤프를 제공해드립니다. 최고품질 70-460시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기