여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-660시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에Juniper인증JN0-660시험을 패스하도록 하겠습니다. 만약Juniper인증JN0-660시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
ITExamDump에서 출시한 Juniper 인증 JN0-660시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는Juniper JN0-660관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게Juniper JN0-660시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는Juniper JN0-660인증시험관련 덤프를 구매하신다면Juniper JN0-660시험은 손쉽게 성공적으로 패스하실 수 있습니다.
시험 번호/코드: JN0-660
시험 이름: Juniper (Service Provider Routing and Switching, Professional)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 171 문항
업데이트: 2013-10-08
Juniper JN0-660인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는Juniper JN0-660있는지 없는지에 알고 싶어합니다. 만약Juniper JN0-660자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.
JN0-660 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-660.html
NO.1 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B
Juniper JN0-660 JN0-660 JN0-660최신덤프 JN0-660 pdf JN0-660자격증
NO.2 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C
Juniper JN0-660기출문제 JN0-660자격증
NO.3 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D
Juniper dumps JN0-660 JN0-660
NO.4 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D
Juniper JN0-660자격증 JN0-660자료 JN0-660 pdf JN0-660기출문제
NO.5 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C
Juniper JN0-660 JN0-660 JN0-660
NO.6 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B
Juniper JN0-660기출문제 JN0-660
NO.7 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D
Juniper JN0-660 dump JN0-660 JN0-660 JN0-660 dump
NO.8 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C
Juniper JN0-660 JN0-660 JN0-660 JN0-660시험문제
NO.9 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A
Juniper JN0-660 JN0-660 pdf JN0-660 JN0-660최신덤프
NO.10 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C
Juniper덤프 JN0-660 JN0-660 JN0-660자료
NO.11 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D
Juniper자료 JN0-660 JN0-660 JN0-660
NO.12 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper pdf JN0-660시험문제 JN0-660 pdf
NO.13 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C
Juniper JN0-660 JN0-660최신덤프 JN0-660 dumps
NO.14 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D
Juniper dumps JN0-660 pdf JN0-660 JN0-660 dump
NO.15 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D
Juniper pdf JN0-660 JN0-660 dump
NO.16 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C
Juniper JN0-660최신덤프 JN0-660 JN0-660 dump
NO.17 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B
Juniper자료 JN0-660 JN0-660
NO.18 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A
Juniper pdf JN0-660기출문제 JN0-660
NO.19 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C
Juniper JN0-660 dump JN0-660
NO.20 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B
Juniper JN0-660 dumps JN0-660시험문제 JN0-660 pdf
ITexamdump의 MB7-700덤프의 VCE테스트프로그램과 JN0-690덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP3-C33시험에 대비한 고품질 덤프와 ICGB시험 최신버전덤프를 제공해드립니다. 최고품질 70-481시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기