2014년 1월 16일 목요일

Cisco 642-681 덤프데모

많은 분들은Cisco 642-681인증시험이 아주 어려운 것은 알고 있습니다. 하지만 우리ITExamDump를 선택함으로Cisco 642-681인증시험은 그렇게 어렵지 않다는 것을 알게 될 것입니다. Pass4Tes의Cisco 642-681합습가이드는 시험의 예상문제부터 전면적이로 만들어진 아주 퍼펙트한 시험자료입니다. 우리의 서비스는Cisco 642-681구매 후 최신버전이 업데이트 시 최신문제와 답을 모두 무료로 제공합니다.

지금 같은 경쟁력이 심각한 상황에서Cisco 642-681시험자격증만 소지한다면 연봉상승 등 일상생활에서 많은 도움이 될 것입니다.Cisco 642-681시험자격증 소지자들의 연봉은 당연히Cisco 642-681시험자격증이 없는 분들보다 높습니다. 하지만 문제는Cisco 642-681시험패스하기가 너무 힘듭니다. ITExamDump는 여러분의 연봉상승을 도와 드리겠습니다.

Cisco 인증642-681인증시험공부자료는ITExamDump에서 제공해드리는Cisco 인증642-681덤프가 가장 좋은 선택입니다. ITExamDump에서는 시험문제가 업데이트되면 덤프도 업데이트 진행하도록 최선을 다하여 업데이트서비스를 제공해드려 고객님께서소유하신 덤프가 시장에서 가장 최신버전덤프로 되도록 보장하여 시험을 맞이할수 있게 도와드립니다.

우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Cisco 642-681인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Cisco 642-681인증시험을 패스할 수 있다는 것을 보장합니다.

Cisco 642-681인증시험은 현재IT인사들 중 아주 인기 잇는 인증시험입니다.Cisco 642-681시험패스는 여러분의 하시는 일과 생활에서 많은 도움을 줄뿐만 아니라 중요한 건 여러분의IT업계에서의 자기만의 자리를 지키실 수 잇습니다.이렇게 좋은 시험이니 많은 분들이 응시하려고 합니다,하지만 패스 율은 아주 낮습니다.

시험 번호/코드: 642-681
시험 이름: Cisco (Advanced Wireless LAN for System Engineers Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 93 문항
업데이트: 2014-01-15

642-681 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-681.html

NO.1 Which two key features are unique to the controller-based feature set? (Choose two.)
A. fast secure roaming
B. rogue access point detection
C. access point participation in RF management
D. access point registration via digital certificate
E. dynamic RF control without a dedicated management platform
Answer: DE

Cisco   642-681   642-681시험문제

NO.2 How is a bridge group name used in a wireless mesh deployment?
A. It is used to retrieve the secret shared key.
B. It logically groups access points to avoid interference from neighboring mesh networks.
C. It is used as a password in communication preceding LWAPP.
D. It is used to join the outdoor mesh network with the controller mobility group.
Answer: B

Cisco기출문제   642-681   642-681   642-681자격증   642-681 dump   642-681인증

NO.3 The CiscoWorks Wireless LAN Solution Engine uses which protocol for radio management?
A. CCKM
B. LWAPP
C. SNMP
D. WLCCP
Answer: D

Cisco자격증   642-681   642-681   642-681기출문제   642-681기출문제

NO.4 Which two statements correctly describe the Cisco Catalyst WiSM? (Choose two.)
A. It supports up to 100 access points per module.
B. It supports up to 200 access points per module.
C. It supports up to 300 access points per module.
D. It has a maximum of four modules per chassis.
E. It has a maximum of five modules per chassis.
F. It has a maximum of six modules per chassis.
Answer: CE

Cisco   642-681   642-681

NO.5 What is the maximum number of wireless devices that a Cisco 2700 Series Wireless Location
Appliance can track, operating with Cisco WCS version 4.0?
A. 500
B. 1000
C. 1500
D. 2500
Answer: D

Cisco   642-681   642-681   642-681   642-681   642-681자료

NO.6 The Newton manufacturing company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70-percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the current
cable plant will support it.
A wireless bridging solution would provide which three benefits to the customer? (Choose three.)
A. rapid deployment
B. immunity to weather
C. increased bandwidth
D. guaranteed bandwidth
E. increased security
F. lower total cost of ownership
Answer: ACF

Cisco기출문제   642-681 dumps   642-681   642-681

NO.7 Which statement describes how RSSI information is processed in a WLAN with a location appliance
using controller-based products?
A. Access points aggregate RSSI information.
B. WLAN controllers compute RSSI information.
C. The location appliance collects the RSSI information.
D. The Cisco WCS collects and aggregates the RSSI information and forwards it to the location
appliance.
Answer: C

Cisco자료   642-681 dumps   642-681최신덤프   642-681   642-681

NO.8 The Cisco 3200 Series Mobile Access Router has integrated wireless support for which two
FCC-approved frequency ranges? (Choose two.)
A. 900 to 928 MHz
B. 2.400 to 2.4835 GHz
C. 4.940 to 4.990 GHz
D. 5.150 to 5.250 GHz
E. 5.725 to 5.825 GHz
Answer: BC

Cisco dump   642-681   642-681   642-681시험문제

NO.9 What is the maximum number of access points that a high-end Cisco WCS server can support?
A. 500
B. 1000
C. 1500
D. 3000
Answer: D

Cisco자격증   642-681 pdf   642-681기출문제   642-681

NO.10 A customer in the United States requires connectivity between two campus locations that are located
6 miles (9.65 km) apart. The customer also needs a minimum data rate of 54 Mbps in an area that is
known to have 2.4-GHz interference. Which two devices will provide a bridge link and avoid the
interference? (Choose two.)
A. Cisco Aironet 1100 Series Access Point
B. Cisco Aironet 1210 Series Access Point
C. Cisco Aironet 1242AG Series Access Point
D. Cisco Aironet 1300 Series Outdoor Access Point/Bridge
E. Cisco Aironet 1400 Series Wireless Bridge
Answer: CE

Cisco dumps   642-681   642-681 dump   642-681자격증   642-681

NO.11 In a mesh network, what is the recommended hop-count limit of a mesh access point from its
associated root access point?
A. 2
B. 4
C. 6
D. 8
Answer: B

Cisco pdf   642-681 dump   642-681덤프

NO.12 How many prior configuration versions can be archived on the CiscoWorks WLSE?
A. two
B. four
C. six
D. eight
Answer: B

Cisco dumps   642-681   642-681   642-681

NO.13 OFDM provides which improvement over DSSS in the 2.4-GHz range?
A. greater resistance to multipath interference
B. more nonoverlapping channels
C. more bandwidth per channel
D. full-duplex communication
Answer: A

Cisco   642-681기출문제   642-681

NO.14 Which one of the following integrated services routers supports the integrated 2.4-GHz b/g access
points?
A. Cisco 1812
B. Cisco 1811
C. Cisco 1841
D. Cisco 1803
Answer: C

Cisco   642-681   642-681   642-681 dumps

NO.15 Which three wireless intrusion-prevention signatures are part of the standard signature set provided by
the Wireless LAN Controller? (Choose three.)
A. ad-hoc network detection
B. rogue network detection
C. rogue access point detection
D. deauth flood detection
E. fake access point detection
F. NetStumbler detection
Answer: DEF

Cisco자격증   642-681자료   642-681 dumps

NO.16 A customer has a small remote site with 10 standalone access points. In which two of the following
scenarios would it be appropriate to implement CiscoWorks WLSE Express? (Choose two.)
A. EAP-Cisco Wireless (Cisco LEAP) security is required and an external AAA server is available.
B. EAP-Cisco Wireless (Cisco LEAP) security is required and no external AAA server is available.
C. EAP-FAST security is required and no external AAA server is available.
D. EAP-FAST security is required and an AAA server is available.
E. MAC authentication is required and no external AAA server is available.
F. MAC authentication is required and an external AAA server is available.
Answer: BC

Cisco dump   642-681   642-681인증

NO.17 The Newton Manufacturing Company has three facilities that are located in Columbia, South Carolina.
The corporate office is located in an 11-story building downtown. The R&D facility is located on the north
side of the city approximately 4 miles (6.4 km) from the corporate office in a five-story building. The
manufacturing facility is located approximately 6 miles (9.6 km) to the northwest of the corporate office.
Line of sight exists from the downtown office to all facilities. Users at the manufacturing plant require
network connectivity for file-sharing and e-mail, while the users at the R&D facility require high-speed
Internet access with the ability to send large CAD drawings to the corporate office and large machine
control files to the manufacturing facility. Presently, the manufacturing facility is connected to the
corporate office by a 64-kbps leased line, and the R&D facility is connected to both the corporate office
and the manufacturing facility by a dedicated T1 line. The company plans to add a second line of
development at the R&D facility within the next 60 days. The current T1 lines are at a constant 70 percent
utilization rate. The current projected lead time for installation of additional lines is 90 days if the cable
plant will support it.
Which deployment option would provide the most benefit to the customer?
A. point-to-point link from corporate to manufacturing, and a point-to-point link from corporate to R&D
B. point-to-multipoint solution with the root bridge located at the manufacturing facility
C. point-to-multipoint solution with the root bridge located at the corporate office
D. point-to-multipoint solution with the root bridge located at the R&D facility
Answer: D

Cisco자격증   642-681   642-681   642-681   642-681

NO.18 How many mesh access points can be placed on a map with efficient link rendering in Cisco WCS?
A. 50
B. 100
C. 150
D. 200
Answer: B

Cisco최신덤프   642-681   642-681   642-681덤프   642-681기출문제

NO.19 Which three devices are required to implement a Cisco 2700 Series Wireless Location Appliance?
(Choose three.)
A. wireless controller
B. wireless domain server
C. Cisco Wireless Control System
D. controller-based access point
E. standalone access point
F. CiscoWorks Wireless LAN Solution Engine
Answer: ACD

Cisco   642-681 dump   642-681

NO.20 What is the Cisco-recommended limit of standalone access points to be managed by a CiscoWorks
WLSE 1130-19 with RF management enabled?
A. 1000
B. 1500
C. 1800
D. 2500
Answer: C

Cisco자료   642-681   642-681   642-681

ITexamdump의 000-596덤프의 VCE테스트프로그램과 LOT-440덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-466시험에 대비한 고품질 덤프와 HP2-B111시험 최신버전덤프를 제공해드립니다. 최고품질 000-087시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/642-681.html

댓글 없음:

댓글 쓰기