Microsoft인증070-595시험덤프의 문제와 답은 모두 우리의 엘리트들이 자신의 지식과 몇 년간의 경험으로 완벽하게 만들어낸 최고의 문제집입니다. 전문적으로Microsoft인증070-595시험을 응시하는 분들을 위하여 만들었습니다. 여러분이 다른 사이트에서도Microsoft인증070-595시험 관련덤프자료를 보셨을 것입니다 하지만 우리ITExamDump의 자료만의 최고의 전문가들이 만들어낸 제일 전면적이고 또 최신 업데이트일 것입니다.Microsoft인증070-595시험을 응시하고 싶으시다면 ITExamDump자료만의 최고의 선택입니다.
Microsoft인증 070-595시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신Microsoft인증 070-595시험에 대비한Microsoft인증 070-595덤프를 발췌하였습니다. Microsoft인증 070-595덤프는Microsoft인증 070-595시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 Microsoft인증 070-595덤프를 추천합니다.
ITExamDump의Microsoft 070-595인증시험의 자료 메뉴에는Microsoft 070-595인증시험실기와Microsoft 070-595인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Microsoft 070-595인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
우리 ITExamDump에서는 여러분을 위하여 정확하고 우수한 서비스를 제공하였습니다. 여러분의 고민도 덜어드릴 수 있습니다. 빨리 성공하고 빨리Microsoft 070-595인증시험을 패스하고 싶으시다면 우리 ITExamDump를 장바구니에 넣으시죠 . ITExamDump는 여러분의 아주 좋은 합습가이드가 될것입니다. ITExamDump로 여러분은 같고 싶은 인증서를 빠른시일내에 얻게될것입니다.
Microsoft 070-595 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Microsoft 070-595시험대비 덤프는Microsoft 070-595시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.
시험 번호/코드: 070-595
시험 이름: Microsoft (TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 57 문항
업데이트: 2014-02-07
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Microsoft인증 070-595시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Microsoft인증 070-595덤프에 있는 문제만 잘 이해하고 습득하신다면Microsoft인증 070-595시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
ITExamDump의Microsoft인증 070-595덤프는 몇십년간 IT업계에 종사한 전문가들이Microsoft인증 070-595 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. Microsoft인증 070-595덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의Microsoft인증 070-595덤프는 Microsoft인증 070-595시험패스의 특효약입니다.
070-595 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-595.html
NO.1 You are developing applications for BizTalk Server 2010. The application processes orders for two
vendors. These vendors have different message formats for their orders.
You define BizTalk schemas for both vendors in separate projects and name the projects VendorA and
VendorB. You promote the OrderType property in the schema of VendorA and the PurchaseType property
in the schema of VendorB. Then you deploy the application.
You need to log messages to disk for shoe orders for VendorA and bike orders for VendorB.
What should you do?
A. Add a FILE send port with the filter: VendorA.OrderType==Shoes Or VendorB.PurchaseType==Bikes
B. Add a FILE send port with the filter: VendorA.OrderType==Shoes And VendorB.PurchaseType==Bikes
C. Add a send port group with the filter: VendorA.OrderType==Shoes Or VendorB.PurchaseType==Bikes
D. Add a send port group with the filter: VendorA.OrderType==Shoes And
VendorB.PurchaseType==Bikes
Answer: A
Microsoft dump 070-595 dumps 070-595 pdf 070-595 pdf 070-595시험문제
NO.2 A solution in Microsoft Visual Studio 2010 contains a test project with unit tests for a BizTalk Server 2010
schema.
When the test project is built, an error occurs that indicates that the tested schema does not contain a
definition for ValidateInstance or an extension method with this name.
You need ensure that the project builds in Visual Studio 2010 without errors.
What should you do?
A. Set Redeploy to False in the project properties for the schema project.
B. Set Enable Unit Testing to True in the project properties for the schema project.
C. Check Enable Code Analysis on Build in the project properties for the test project.
D. Sign the assembly with a strong name key in the project properties for the schema project.
Answer: B
Microsoft기출문제 070-595 070-595자료
NO.3 A BizTalk Server 2010 application is designed to receive a file from a customer.
The customer periodically updates the file on an FTP site. The file has a name that never changes. You
have been given read-only permissions to the site.
You need to create a receive location that detects when the file has been updated and then retrieves it.
You use the BizTalk Administration console to create a receive port. What should you do next?
A. Create an FTP receive location and set the Mode property to Passive.
B. Create an FTP receive location and set the Target File Name property to *.*.
C. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to No and set the Enable Timestamp Comparison property to Yes.
D. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to Yes and set the Enable Timestamp Comparison property to
Yes.
Answer: C
Microsoft 070-595 070-595 070-595 070-595
NO.4 You are developing a solution for BizTalk Server 2010. You deploy the solution to the runtime
environment. The solution includes one orchestration with a direct bound send port that sends a message
to the BizTalk MessageBox database for routing to a folder.
After starting the BizTalk application for testing, you notice that the following error is logged in the servers
event log:
The published message could not be routed because no subscribers were found. This error occurs if the
subscribing orchestration or send port has not been enlisted, or if some of the message properties
necessary for subscription evaluation have not been promoted. Please use the BizTalk Administration
console to troubleshoot this failure.
You need to resolve the error without changing the code in the orchestration and without redeploying the
solution.
What should you do?
A. Add a dynamic send port.
B. Add a send port that has a filter that matches the message type.
C. Add a send port that uses the XmlTransmit pipeline.
D. Add a receive port that uses the XmlReceive pipeline.
Answer: B
Microsoft 070-595자격증 070-595 070-595
NO.5 A BizTalk Server 2010 application contains an orchestration with one receive port and one send port.
You evaluate the runtime behavior of the orchestration by viewing the promoted properties of any inbound
and outbound messages of the orchestration.
You need to modify the application so that you can view these promoted properties on the BizTalk Server
Group Hub page.
What should you do?
A. In Orchestration Designer, change the Type Modifier property to Public. Redeploy the orchestration.
B. In Orchestration Designer, change the Report To Analyst property to True. Redeploy the orchestration.
Create filters on the receive port receive location that evaluate the messages promoted properties.
C. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Properties, select the check boxes for incoming and outgoing messages.
D. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Bodies, select Before orchestration processing and After orchestration processing.
Answer: C
Microsoft최신덤프 070-595 070-595
NO.6 A BizTalk Server 2010 solution sends out XML invoices to a customer on a regular basis. The customer
has sent you the public key part of their certificate. You installed this certificate on the server and set up a
send port to use this certificate. The certification authority for the certificate is one that you already trust.
You need to ensure that all invoices sent to the customer are encrypted using the provided public key.
What should you do?
A. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Add signing
certification to message property of the component to True.
B. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Enable encryption
property of the component to True.
C. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Content transfer
encoding property of the component to Base64.
D. Create a custom pipeline that uses the default XML assembler component. Use the default values for
all properties of the component.
Answer: B
Microsoft dumps 070-595 070-595인증 070-595기출문제 070-595시험문제
NO.7 A supplier sends messages that they sign with a certificate to a BizTalk Server 2010 application.
You need to ensure that the received messages are signed with the certificate.
What should you do?
A. Use the XMLTransmit pipeline.
B. Use the XMLReceive pipeline.
C. Use a custom pipeline that leverages the MIME/SMIME encoder component.
D. Use a custom pipeline that leverages the MIME/SMIME decoder component.
Answer: D
Microsoft덤프 070-595 dump 070-595 070-595자격증 070-595덤프
NO.8 A company uses BizTalk Server 2010 to receive electronic orders from multiple customers. You have
schemas for all the order formats that the customers send.
You need to create a business process that handles an incoming order.
You create a canonical schema that represents an order. You also create an orchestration that handles an
order of the canonical schema. What should you do next?
A. Create maps from the canonical schema to each of the customer order formats. Create a send port and
bind it to the orchestration. Use the maps on the send port.
B. Create maps from the canonical schema to each of the customer order formats. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
C.Create maps from each of the customer order formats to the canonical schema. Create a send port and
bind it to the orchestration. Use the maps on the send port.
D. Create maps from each of the customer order formats to the canonical schema. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
Answer: D
Microsoft최신덤프 070-595 070-595 070-595 dump
NO.9 A BizTalk Server 2010 application sends purchase orders. Current applications use an existing mail
server to send mail. The purchase order application should use a distribution list that is managed by a
new mail server. Company IT policy does not allow you to create a new host for the new mail server.
You need to create a BizTalk port that sends orders to the email distribution list through the new mail
server.
What should you do?
A. Create an SMTP send port configured to send to the email distribution list. Specify the name of the new
mail server in Microsoft Internet Information Services (IIS) Manager.
B. Create an SMTP send port configured to send to the email distribution list. Create a filter on the send
port with the SMTP.SMTPHost context property equal to the new mail server.
C. Create a send port group with an SMTP send port configured to send to the email distribution list.
Create a filter on the send port group with the SMTP.SMTPHost context property equal to the new mail
server.
D. Create an SMTP send port configured to send to the email distribution list. Override the current SMTP
send handler settings by entering the new mail server in the SMTP server name field in the Handler
Override section of the port.
Answer: D
Microsoft pdf 070-595 070-595자격증
NO.10 A BizTalk Server 2010 solution contains a map that transforms an internal order format into the order
format of a supplier. You have examples of the internal order.
You need to perform unit testing to make sure that the map works.
You add a test project and a test class to the solution. You then add a reference to the project with the
map. What should you do next?
A. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
B. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableSchemaBase class to test the schema.
C. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.XLANGs.BaseTypes. Use the
TestableMapBase class to test the map.
D. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
Answer: C
Microsoft 070-595 070-595 070-595덤프
ITexamdump의 000-089덤프의 VCE테스트프로그램과 VCAD510덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-T01D시험에 대비한 고품질 덤프와 1Y0-300시험 최신버전덤프를 제공해드립니다. 최고품질 C4120-783시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기