HP HP0-P21인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면HP HP0-P21인증시험이 아주 좋은 자격증입니다. 만약HP HP0-P21인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.
최근 IT 업종에 종사하는 분들이 점점 늘어가는 추세하에 경쟁이 점점 치열해지고 있습니다. IT인증시험은 국제에서 인정받는 효력있는 자격증을 취득하는 과정으로서 널리 알려져 있습니다. ITExamDump의 HP인증 HP0-P21덤프는IT인증시험의 한 과목인 HP인증 HP0-P21시험에 대비하여 만들어진 시험전 공부자료인데 높은 시험적중율과 친근한 가격으로 많은 사랑을 받고 있습니다.
ITExamDump는HP HP0-P21인증시험의 촉매제 같은 사이트입니다.HP HP0-P21인증시험 관연 덤프가 우리ITExamDump에서 출시되었습니다. 여러분이HP HP0-P21인증시험으로 나 자신과 자기만의 뛰어난 지식 면을 증명하고 싶으시다면 우리 ITExamDump의HP HP0-P21덤프자료가 많은 도움이 될 것입니다.
시험 번호/코드: HP0-P21
시험 이름: HP (HP-UX 11i v3 Advanced System Administration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 124 문항
업데이트: 2014-03-02
현재HP HP0-P21인증시험을 위하여 노력하고 있습니까? 빠르게HP인증 HP0-P21시험자격증을 취득하고 싶으시다면 우리 ITExamDump 의 덤프를 선택하시면 됩니다,. ITExamDump를 선택함으로HP HP0-P21인증시험패스는 꿈이 아닌 현실로 다가올 것입니다,
HP0-P21 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-P21.html
NO.1 Which command should you run to look at the detailed status of a package called pkg1?
A. cmgetconf -v pkg1
B. cmviewconf -v pkg1
C. cmquerycl -v pkg1
D. cmviewcl -v -p pkg1
Answer: D
HP HP0-P21 HP0-P21 pdf HP0-P21 dumps
NO.2 You are performing an HP-UX cold installation using the advanced option. Which parameters can you
set on the System Menu tab.? (Select three.)
A. hostname
B. user passwords (non-root)
C. files systems
D. additional interfaces
E. software file sets
F. time zone
Answer: A, D, F
HP HP0-P21 HP0-P21
NO.3 What are the major advantages of the new Mass Storage Stack of HP-UX 11i v3 compared to
previous HP-UX versions? (Select two.)
A. Device Files are bound to Physical Hardware Paths or LUNs.
B. A significantly larger number of devices can be connected to a single system.
C. When moving devices to different FC switch ports, manual intervention during LVM configuration
is not required.
D. The I/O paths switch transparently in the event of a failure.
E. The Agile Device Files are based on the LUN world wide ID (WWID) address.
Answer: BE
HP인증 HP0-P21 dumps HP0-P21 dump HP0-P21자격증 HP0-P21
NO.4 Which LVM feature does Service guard use?
A. delayed activation
B. inclusive activation
C. exclusive activation
D. temporary activation
Answer: C
HP기출문제 HP0-P21 HP0-P21인증 HP0-P21 HP0-P21 dump
NO.5 Management purchases an Integrity Superdome to replace two HP rp8420 Servers. There is available
CPU capacity and management decides to bring additional applications for execution on the Integrity
Superdome. Based on this scenario, which statements can be true? (Select two.)
A. Some of the applications are Linux-based and Linux applications are not supported to run on an
Integrity Superdome.
B. Some of the applications are Linux-based and Linux applications will run in an HP Integrity Virtual
Machine on an Integrity Superdome.
C. Some of the applications are Windows-based that run alongside HP-UX applications in a different
vPar inside of an Integrity Superdome.
D. Some of the applications are Windows-based that run alongside HP-UX applications in a different
nPar inside of an Integrity Superdome.
Answer: BD
HP HP0-P21기출문제 HP0-P21기출문제 HP0-P21자료 HP0-P21기출문제
NO.6 Which statements are true about threads and processes for a system running HP-UX? (Select three.)
A. A thread can have multiple processes.
B. The kernel parameter max_thread_proc defines the maximum number of concurrent threads
allowed per process.
C. A thread can be killed using the kill command.
D. The kernel parameter nkthread limits the number of threads allowed to run simultaneously,
system-wide.
E. A process can have multiple threads.
F. A thread is similar to a process, but cannot be switched to a different CPU.
Answer: BDE
HP HP0-P21 HP0-P21
NO.7 What is a characteristic of the Memory File System (MemFS)?
A. It supports /tmp and /var/tmp to be used as a MemFS.
B. It swaps data to swap space when the system is under memory pressure.
C. It uses disk devices to store compressed data.
D. Data in MemFS remain persistent after unmounts and reboots.
Answer: B
HP HP0-P21 HP0-P21 pdf
NO.8 Your /home file system mounted on /dev/vg01/lvol4 is running out of space. Which command
should you use to determine which directory has the largest files?
A. du -k /dev/vg01/lvol4
B. du -ak /home
C. du -as /home
D. du -a /dev/vg01/lvol4
Answer: B
HP HP0-P21덤프 HP0-P21자격증 HP0-P21인증 HP0-P21인증 HP0-P21자료
NO.9 What are the benefits of the Service guard Storage Management Suite on HP-UX 11i v3? (Select
two.)
A. enables Oracle ASM to run within a file system
B. maintains service levels through the integration with VSE
C. offers tighter integration of Veritas Cluster Server on HP-UX
D. allows for heterogeneous platform support with a single solution
E. enables Oracle RAC customers to get the manageability of a file system
F. provides a single storage management solution to manage all applications
Answer: B, E, F
HP자격증 HP0-P21 HP0-P21 HP0-P21 dump
NO.10 Which functions does the idisk command perform? (Select two.)
A. lists the EFI partition table on a disk
B. creates a new partition table based on the /tmp/idtable file
C. validates the EFI partition information
D. allows the creation of up to 16 partitions
E. lists the usable blocks available for partitioning
Answer: AC
HP최신덤프 HP0-P21덤프 HP0-P21 HP0-P21
NO.11 Which properties can be adjusted in the files of the directory /etc/default? (Select four.)
A. time zone
B. new user properties
C. volume manager properties
D. IP addresses for the network interfaces
E. password format policy
F. configuration of the ip_forwarding parameter
G. default kernel parameters
H. maximum sys log size
Answer: ABEH
HP HP0-P21 HP0-P21
NO.12 You just installed a new HP-UX server named wildcat on your company intranet. You have Ignite-UX
running on a server named ignite_server. What must you do to create a recovery image for the new
server? (Select two.)
A. Ensure the new server has sufficient space in /var.
B. Install Ignite-UX on wildcat.
C. Check the log files in wildcat.
D. Run make_net_recovery -s ignite_server on wildcat.
E. Check the log files in ignite_server.
Answer: BD
HP인증 HP0-P21 HP0-P21기출문제 HP0-P21
NO.13 Which kernel parameter defines the maximum amount of physical memory that can be used for
caching file I/O data?
A. bufpages
B. filecache_max
C. dbc_max_pct
D. nbuf
Answer: B
HP HP0-P21 HP0-P21 HP0-P21자료
NO.14 Which command should you use to determine the status of a LUN path?
A. ioscan
B. scsimgr
C. olrad
D. rad
Answer: A
HP HP0-P21인증 HP0-P21 HP0-P21
NO.15 What are the key benefits of the 11i v3 Mass Storage Stack? (Select two.)
A. improved security capabilities
B. dramatic I/O performance improvements
C. improved PVLinks for multipathing
D. simplified management and automatic configuration
Answer: BD
HP인증 HP0-P21 HP0-P21덤프 HP0-P21 HP0-P21 HP0-P21
NO.16 Which VxVM daemons need to be running for the volume manager to function correctly?
A. vxfsd, vxiod, vxvmd
B. vxfsd, vxiod, vxnotify
C. vxconfigd, vxdctl, vxiod
D. vxconfigd, vxiod, vxrelocd, vxnotify
Answer: D
HP HP0-P21 HP0-P21 HP0-P21 HP0-P21 HP0-P21
NO.17 You have set up a Service guard cluster but received notification from network security that the
current configuration exposes remote user login risks and must be remediated. Which file should be
set up to eliminate the risk?
A. /etc/hosts.equiv
B. /etc/cmcluster/cmclconfig
C. $HOME/.rhosts
D. /etc/cmcluster/cmclnodelist
Answer: D
HP인증 HP0-P21 dumps HP0-P21자료 HP0-P21덤프
NO.18 What are valid statements when referring to changing system run levels? (Select two.)
A. Run level 1 is the same as single user mode.
B. Run level 5 is the default run level for newly installed servers.
C. The init command can be used to interactively change run levels.
D. Default networking is started in run level 1.
E. The command shutdown can place the system in single user mode.
Answer: CE
HP pdf HP0-P21기출문제 HP0-P21덤프 HP0-P21자료
NO.19 Which file do you edit in order to change the behavior of the syslogd daemon?
A. /etc/syslogd.conf file
B. /etc/syslog.conf file
C. /etc/rc.config.d/syslogd.conf file
D. /var/adm/syslog.conf file
Answer: B
HP pdf HP0-P21 HP0-P21시험문제
NO.20 You previously set up HP SIM to use username/password authentication with account "wbemacc"
for the WBEM protocol for all of your managed systems. Your site has a policy that user passwords
must change every three months. It also configures PAM to lock out an account after three invalid
password attempts. What are ways to specify a new password before re-running "Identify Systems"?
(Select two.)
A. Invoke mxwbemsub a -c wbemacc:newpass.
B. For each system, invoke mxnodesecurity -a -n <hostname> -p WBEM -c wbemacc:newpass.
C. Use the HP SIM Options->Protocol Settings->Global Protocol Settings menu item.
D. Select all the systems and use the HP SIM Options->Protocol Settings->System Protocol Settings
menu item.
Answer: BD
HP HP0-P21인증 HP0-P21덤프 HP0-P21시험문제 HP0-P21 dumps
ITexamdump의 C_TPLM30_66덤프의 VCE테스트프로그램과 MB6-870덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 C4120-783시험에 대비한 고품질 덤프와 C_TSCM52_66시험 최신버전덤프를 제공해드립니다. 최고품질 000-455시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기