Citrix인증 1Y0-A02덤프로Citrix시험을 패스,하지 못하셨다구요? 최선을 다했는데도 실패하였다는 말은 영원히 하지마세요. Citrix인증 1Y0-A02시험을 패스하는 방법은 많고도 많습니다. ITExamDump의Citrix인증 1Y0-A02덤프로 시험에 다시 도전해보세요. ITExamDump의Citrix인증 1Y0-A02덤프는 착한 가격에 100%에 달하는 적중율과 패스율을 보장해드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용을 환불처리해드립니다. ITExamDump의Citrix인증 1Y0-A02덤프로 시험패스를 꿈꿔보세요.
Citrix 1Y0-350인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Citrix 1Y0-350인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Citrix 1Y0-350인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Citrix 1Y0-350시험을 패스할 수 있도록 도와드립니다.
IT업계의 치열한 경쟁속에 살아 남으려면 자신의 능력을 증명하여야 합니다. 국제승인을 받는 IT인증자격증을 많이 취득하시면 취직이든 승진이든 이직이든 모든 면에서 이득을 볼수 있습니다. 최근 Citrix인증 1Y0-A18시험에 도전하는 분이 많은데 ITExamDump에서 Citrix인증 1Y0-A18시험에 대비한 가장 최신버전 덤프공부가이드를 제공해드립니다.
ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도Citrix 인증1Y0-A02 인증시험으로 고민하시고 계십니까? Citrix 인증1Y0-A02인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.
시험 이름: Citrix XenServer Enterprise Edition 4.1:Administration
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-A02시험덤프
100% 합격율 보장
Q&A: 51 문항 1Y0-A02시험일정
업데이트: 2014-07-01
1Y0-A02시험덤프: >>펼쳐보기
시험 이름: Citrix NetScaler 10 Essentials and Networking
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-350강좌
100% 합격율 보장
Q&A: 126 문항 1Y0-350자격증시험
업데이트: 2014-07-01
1Y0-350강좌: >>펼쳐보기
시험 이름: Basic Administration for Citrix XenApp 6
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-A18자격시험
100% 합격율 보장
Q&A: 187 문항 1Y0-A18자격증
업데이트: 2014-07-01
1Y0-A18자격시험: >>펼쳐보기
ITExamDump의 Citrix인증 1Y0-A18덤프의 무료샘플을 이미 체험해보셨죠? ITExamDump의 Citrix인증 1Y0-A18덤프에 단번에 신뢰가 생겨 남은 문제도 공부해보고 싶지 않나요? ITExamDump는 고객님들의 시험부담을 덜어드리기 위해 가벼운 가격으로 덤프를 제공해드립니다. ITExamDump의 Citrix인증 1Y0-A18로 시험패스하다 더욱 넓고 좋은곳으로 고고싱 하세요.
ITExamDump의Citrix인증 1Y0-350덤프는 몇십년간 IT업계에 종사한 전문가들이Citrix인증 1Y0-350 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. Citrix인증 1Y0-350덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의Citrix인증 1Y0-350덤프는 Citrix인증 1Y0-350시험패스의 특효약입니다.
1Y0-350 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-350.html
NO.1 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix IT시험덤프 1Y0-350응시료 1Y0-350최신덤프 1Y0-350자료 1Y0-350자료
NO.2 A network engineer wants to optimize a published load balanced SSL virtual server for WAN
connection with long delay, high bandwidth with minimal packet drops.
What would the network engineer use to do this type of optimization for the SSL virtual server?
A. SSL policy
B. TCP profile
C. Compression policy
D. Priority queuing policy
Answer: B
Citrix pdf 1Y0-350 1Y0-350시험자료 1Y0-350시험정보
NO.3 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix기출문제 1Y0-350자료 1Y0-350교재 1Y0-350 1Y0-350
NO.4 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A
Citrix자격시험 1Y0-350국제공인자격증 1Y0-350 Dumps 1Y0-350
NO.5 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B
Citrix시험 1Y0-350최신덤프 1Y0-350최신덤프
NO.6 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix PDF 1Y0-350후기 1Y0-350교육
NO.7 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix자격증덤프 1Y0-350 1Y0-350 IT시험덤프
NO.8 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix Dumps 1Y0-350기출문제 1Y0-350자격증
댓글 없음:
댓글 쓰기