레이블이 HP0-Y30인 게시물을 표시합니다. 모든 게시물 표시
레이블이 HP0-Y30인 게시물을 표시합니다. 모든 게시물 표시

2013년 10월 29일 화요일

HP HP0-Y30 시험문제

HP인증 HP0-Y30시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. HP인증 HP0-Y30시험을 패스하려면 ITExamDump의HP인증 HP0-Y30덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. HP인증 HP0-Y30덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.

목표가 있다면 목표를 향해 끊임없이 달려야 멋진 인생이 됩니다. 지금의 현황에 만족하여 아무런 노력도 하지 않는다면 언젠가는 치열한 경쟁을 이겨내지 못하게 될것입니다. IT업종에 종사중이시라면 다른분들이 모두 취득하는 자격증쯤은 마련해야 되지 않겠습니까? HP인증 HP0-Y30시험은 요즘 가장 인기있는 자격증 시험의 한과목입니다. IT업계에서 살아남으려면ITExamDump에서HP인증 HP0-Y30덤프를 마련하여 자격증에 도전하여 자기의 자리를 찾아보세요.

ITExamDump는 여러분이 빠른 시일 내에HP HP0-Y30인증시험을 효과적으로 터득할 수 있는 사이트입니다.HP HP0-Y30인증 자격증은 일상생활에 많은 개변을 가져올 수 있는 시험입니다.HP HP0-Y30인증 자격증을 소지한 자들은 당연히 없는 자들보다 연봉이 더 높을 거고 승진기회도 많아지며 IT업계에서의 발전도 무궁무진합니다.

시험 번호/코드: HP0-Y30
시험 이름: HP (Implementing HP Networking Technologies)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 137 문항
업데이트: 2013-10-28

IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. HP인증 HP0-Y30시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 HP인증 HP0-Y30덤프로HP인증 HP0-Y30시험을 준비해보세요. 시험패스가 한결 편해집니다.

IT업계에 종사하는 분이 점점 많아지고 있는 지금 IT인증자격증은 필수품으로 되었습니다. IT인사들의 부담을 덜어드리기 위해ITExamDump는HP인증 HP0-Y30인증시험에 대비한 고품질 덤프를 연구제작하였습니다. HP인증 HP0-Y30시험을 준비하려면 많은 정력을 기울여야 하는데 회사의 야근에 시달리면서 시험공부까지 하려면 스트레스가 이만저만이 아니겠죠. ITExamDump 덤프를 구매하시면 이제 그런 고민은 끝입니다. 덤프에 있는 내용만 공부하시면 IT인증자격증 취득은 한방에 가능합니다.

HP0-Y30 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y30.html

NO.1 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D

HP자격증   HP0-Y30자격증   HP0-Y30 dump

NO.2 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C

HP   HP0-Y30   HP0-Y30   HP0-Y30   HP0-Y30 pdf

NO.3 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A

HP   HP0-Y30인증   HP0-Y30

NO.4 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D

HP dumps   HP0-Y30   HP0-Y30   HP0-Y30 dump

NO.5 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C

HP   HP0-Y30   HP0-Y30

NO.6 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C

HP   HP0-Y30   HP0-Y30

NO.7 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C

HP   HP0-Y30인증   HP0-Y30

NO.8 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D

HP자격증   HP0-Y30   HP0-Y30   HP0-Y30자료

NO.9 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A

HP   HP0-Y30인증   HP0-Y30   HP0-Y30   HP0-Y30

NO.10 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE

HP   HP0-Y30최신덤프   HP0-Y30

NO.11 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B

HP시험문제   HP0-Y30   HP0-Y30덤프   HP0-Y30시험문제   HP0-Y30

NO.12 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A

HP   HP0-Y30   HP0-Y30 dump   HP0-Y30최신덤프   HP0-Y30

NO.13 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B

HP   HP0-Y30최신덤프   HP0-Y30   HP0-Y30   HP0-Y30자료   HP0-Y30 pdf

NO.14 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D

HP   HP0-Y30시험문제   HP0-Y30시험문제   HP0-Y30   HP0-Y30

NO.15 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D

HP자격증   HP0-Y30최신덤프   HP0-Y30 dumps   HP0-Y30자격증

NO.16 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D

HP기출문제   HP0-Y30자격증   HP0-Y30   HP0-Y30자격증

NO.17 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D

HP자격증   HP0-Y30 dump   HP0-Y30 dump   HP0-Y30   HP0-Y30

NO.18 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D

HP   HP0-Y30덤프   HP0-Y30덤프

NO.19 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D

HP   HP0-Y30기출문제   HP0-Y30 pdf   HP0-Y30   HP0-Y30   HP0-Y30최신덤프

NO.20 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B

HP pdf   HP0-Y30   HP0-Y30   HP0-Y30기출문제

ITexamdump의 MB7-701덤프의 VCE테스트프로그램과 70-561덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Y0-A19시험에 대비한 고품질 덤프와 70-461시험 최신버전덤프를 제공해드립니다. 최고품질 MB2-866시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y30.html

2013년 7월 26일 금요일

HP HP0-Y30 인증시험

HP0-Y30인증시험은HP사의 인중시험입니다.HP인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이HP인증HP0-Y30시험을 응시합니다.하지만 실질적으로HP0-Y30시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.


ITExamDump선택으로HP HP0-Y30시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서HP HP0-Y30관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는HP HP0-Y30덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.


ITExamDump에서는 HP인증 HP0-Y30시험을 도전해보시려는 분들을 위해 퍼펙트한 HP인증 HP0-Y30덤프를 가벼운 가격으로 제공해드립니다.덤프는HP인증 HP0-Y30시험의 기출문제와 예상문제로 제작된것으로서 시험문제를 거의 100%커버하고 있습니다. ITExamDump제품을 한번 믿어주시면 기적을 가져다 드릴것입니다.


HP HP0-Y30인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면HP HP0-Y30인증시험이 아주 좋은 자격증입니다. 만약HP HP0-Y30인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.


시험 번호/코드: HP0-Y30

시험 이름: HP (Implementing HP Networking Technologies)

많은 분들이 고난의도인 IT관련인증시험을 응시하고 싶어 하는데 이런 시험은 많은 전문적인 IT관련지식이 필요합니다. 시험은 당연히 완전히 전문적인 IT관련지식을 터득하자만이 패스할 가능성이 높습니다. 하지만 지금은 많은 방법들로 여러분의 부족한 면을 보충해드릴 수 있으며 또 힘든 IT시험도 패스하실 수 있습니다. 혹은 여러분은 전문적인 IT관련지식을 터득하자들보다 더 간단히 더 빨리 시험을 패스하실 수 있습니다.


HP0-Y30 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y30.html


NO.1 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D

HP   HP0-Y30덤프   HP0-Y30   HP0-Y30시험문제

NO.2 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B

HP인증   HP0-Y30   HP0-Y30시험문제   HP0-Y30인증

NO.3 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D

HP   HP0-Y30   HP0-Y30

NO.4 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D

HP dump   HP0-Y30자료   HP0-Y30기출문제   HP0-Y30

NO.5 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C

HP자료   HP0-Y30시험문제   HP0-Y30 dumps   HP0-Y30

NO.6 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D

HP시험문제   HP0-Y30   HP0-Y30 pdf   HP0-Y30 dump   HP0-Y30

NO.7 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D

HP자료   HP0-Y30   HP0-Y30 dump   HP0-Y30

NO.8 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D

HP   HP0-Y30 dump   HP0-Y30 pdf   HP0-Y30시험문제

NO.9 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A

HP시험문제   HP0-Y30   HP0-Y30자격증   HP0-Y30

NO.10 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D

HP자격증   HP0-Y30   HP0-Y30

NO.11 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C

HP자료   HP0-Y30   HP0-Y30자료   HP0-Y30   HP0-Y30최신덤프

NO.12 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C

HP자료   HP0-Y30   HP0-Y30 dump

NO.13 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C

HP덤프   HP0-Y30   HP0-Y30시험문제   HP0-Y30   HP0-Y30

NO.14 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B

HP최신덤프   HP0-Y30기출문제   HP0-Y30덤프   HP0-Y30

NO.15 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE

HP   HP0-Y30   HP0-Y30   HP0-Y30

NO.16 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A

HP   HP0-Y30최신덤프   HP0-Y30   HP0-Y30자격증   HP0-Y30최신덤프

NO.17 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A

HP dump   HP0-Y30 dump   HP0-Y30시험문제   HP0-Y30

NO.18 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D

HP덤프   HP0-Y30인증   HP0-Y30시험문제   HP0-Y30

NO.19 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D

HP   HP0-Y30 pdf   HP0-Y30   HP0-Y30   HP0-Y30 dumps   HP0-Y30

NO.20 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B

HP최신덤프   HP0-Y30   HP0-Y30   HP0-Y30 dumps   HP0-Y30

ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은HP HP0-Y30인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는HP HP0-Y30관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는HP HP0-Y30자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는HP HP0-Y30인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.