RF0-001 덤프 CompTIA 자격증

ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.

그렇게 많은 IT인증덤프공부자료를 제공하는 사이트중ITExamDump의 인지도가 제일 높은 원인은 무엇일가요?그건ITExamDump의 제품이 가장 좋다는 것을 의미합니다. ITExamDump에서 제공해드리는 CompTIA인증 RF0-001덤프공부자료는CompTIA인증 RF0-001실제시험문제에 초점을 맞추어 시험커버율이 거의 100%입니다. 이 덤프만 공부하시면CompTIA인증 RF0-001시험패스에 자신을 느끼게 됩니다.

ITExamDump에서 제공해드리는 CompTIA인증 RF0-001덤프는 가장 출중한CompTIA인증 RF0-001시험전 공부자료입니다. 덤프품질은 수많은 IT인사들로부터 검증받았습니다. CompTIA인증 RF0-001덤프뿐만아니라 ITExamDump에서는 모든 IT인증시험에 대비한 덤프를 제공해드립니다. IT인증자격증을 취득하려는 분들은ITExamDump에 관심을 가져보세요. 구매의향이 있으시면 할인도 가능합니다. 고득점으로 패스하시면 지인분들께 추천도 해주실거죠?

ITExamDump의 CompTIA인증 RF0-001덤프를 선택하여CompTIA인증 RF0-001시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고CompTIA인증 RF0-001시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. CompTIA인증 RF0-001덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.

요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.CompTIA RF0-001시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는CompTIA RF0-001덤프를 제공하는 사이트입니다.

ITExamDump의CompTIA인증 RF0-001덤프를 공부하시면 한방에 시험을 패스하는건 문제가 아닙니다. ITExamDump의CompTIA인증 RF0-001덤프는 시험적중율 최고의 인지도를 넓히 알리고 있습니다.저희가 제공한 시험예상문제로 시험에 도전해보지 않으실래요? CompTIA인증 RF0-001덤프를 선택하시면 성공의 지름길이 눈앞에 다가옵니다.

시험 번호/코드: RF0-001

시험 이름: CompTIA (RFID+ Certification)

RF0-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/RF0-001.html

NO.1 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A

CompTIA   RF0-001인증   RF0-001   RF0-001 pdf

NO.2 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD

CompTIA   RF0-001 dumps   RF0-001   RF0-001

NO.3 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B

CompTIA   RF0-001시험문제   RF0-001

NO.4 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A

CompTIA   RF0-001   RF0-001

NO.5 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A

CompTIA   RF0-001   RF0-001

NO.6 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD

CompTIA   RF0-001   RF0-001   RF0-001자료

NO.7 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C

CompTIA   RF0-001   RF0-001시험문제   RF0-001최신덤프   RF0-001

NO.8 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B

CompTIA인증   RF0-001   RF0-001   RF0-001기출문제

NO.9 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C

CompTIA pdf   RF0-001기출문제   RF0-001 pdf   RF0-001

NO.10 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B

CompTIA기출문제   RF0-001   RF0-001시험문제

NO.11 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C

CompTIA   RF0-001   RF0-001   RF0-001 dump

NO.12 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A

CompTIA최신덤프   RF0-001 dump   RF0-001자료

NO.13 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B

CompTIA기출문제   RF0-001 pdf   RF0-001   RF0-001인증   RF0-001자격증   RF0-001인증

NO.14 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A

CompTIA   RF0-001기출문제   RF0-001

NO.15 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D

CompTIA   RF0-001자료   RF0-001 dump   RF0-001시험문제

NO.16 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C

CompTIA자격증   RF0-001   RF0-001 dumps   RF0-001   RF0-001인증

NO.17 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C

CompTIA dumps   RF0-001 pdf   RF0-001자료   RF0-001 pdf   RF0-001

NO.18 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC

CompTIA자료   RF0-001자료   RF0-001 dump

NO.19 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D

CompTIA   RF0-001   RF0-001   RF0-001

NO.20 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B

CompTIA   RF0-001기출문제   RF0-001시험문제   RF0-001   RF0-001

CompTIA인증 RF0-001시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 CompTIA인증 RF0-001덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. CompTIA 인증RF0-001시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는CompTIA 인증RF0-001시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.