ITExamDump의 제품들은 모두 우리만의 거대한IT업계엘리트들로 이루어진 그룹 즉 관련업계예서 권위가 있는 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도 적중률이 아주 높습니다. 우리의 덤프로 완벽한IBM인증000-015시험대비를 하시면 되겠습니다. 이렇게 어려운 시험은 우리IBM인증000-015덤프로 여러분의 고민과 꿈을 한방에 해결해드립니다.
현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로IBM 000-015인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼IBM 000-015인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,
시험 번호/코드: 000-015
시험 이름: IBM (IBM Maximo Asset Management V7.1 Implementation)
IBM인증 000-015시험을 한방에 편하게 통과하여 자격증을 취득하려면 시험전 공부가이드가 필수입니다. ITExamDump에서 연구제작한 IBM인증 000-015덤프는IBM인증 000-015시험을 패스하는데 가장 좋은 시험준비 공부자료입니다. ITExamDump덤프공부자료는 엘리트한 IT전문자들이 자신의 노하우와 경험으로 최선을 다해 연구제작한 결과물입니다.IT인증자격증을 취득하려는 분들의 곁은ITExamDump가 지켜드립니다.
목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? IBM인증 000-015시험을 패스하는 길에는ITExamDump의IBM인증 000-015덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의IBM인증 000-015덤프는 시험문제에 초점을 두어 제작된 공부자료이기에IBM인증 000-015패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.
IT인증자격증을 취득하는 것은 IT업계에서 자신의 경쟁율을 높이는 유력한 수단입니다. 경쟁에서 밀리지 않으려면 자격증을 많이 취득하는 편이 안전합니다.하지만 IT자격증취득은 생각보다 많이 어려운 일입니다. IBM인증 000-015시험은 인기자격증을 취득하는데 필요한 시험과목입니다. ITExamDump는 여러분이 자격증을 취득하는 길에서의 없어서는 안될 동반자입니다. ITExamDump의IBM인증 000-015덤프로 자격증을 편하게 취득하는게 어떨가요?
ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. IBM인증 000-015덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이IBM인증 000-015덤프 적중율과 패스율은 100% 보장해드립니다. IBM인증 000-015시험에 도전하려는 분들은ITExamDump 의IBM인증 000-015덤프로 시험을 준비할것이죠?
ITExamDump는 IT인증자격증시험에 대비한 덤프공부가이드를 제공해드리는 사이트인데 여러분의 자격증 취득의 꿈을 이루어드릴수 있습니다. IBM인증 000-015시험을 등록하신 분들은 바로ITExamDump의IBM인증 000-015덤프를 데려가 주세요. 단기간에 시험패스의 기적을 가져다드리는것을 약속합니다.
000-015 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-015.html
NO.1 Which statement is correct?
A.A condition code can be used on any rotating Asset.
B.A condition code can be added to any type of Asset.
C.A condition code can only be used on a rotating Asset when the item is condition enabled.
D.There is no condition code on an Asset. Condition codes are only associated with items that are
purchased or held in a storeroom.
Answer: C
IBM덤프 000-015 000-015
NO.2 Which three objects have rotating records? (Choose three.)
A.Person
B.Assets
C.Locations
D.Job Plans
E.Item Master
F.Service Items
Answer: BCE
IBM자료 000-015기출문제 000-015 pdf 000-015
NO.3 An attribute is added to a ClassStructure record in the Classifications application.
On which applications will the attribute be copied to existing records that use this classification?
A.Assets, Item, Locations
B.Job Plan, Ticket Template, Item
C.all applications that have a Specifications tab
D.Assets, Item, Job Plan, Preventive Maintenance
Answer: A
IBM 000-015 000-015 000-015최신덤프
NO.4 Which applications record the history of attribute changes made on the Specifications tab, without
having to use e-Audit as defined in Database Configuration?
A.Asset, Configuration Item
B.Job Plan, Ticket Template
C.Item Master, Service Item, Tool, Job Plan
D.Asset, Location, Item Master, Service Item, Tool
Answer: A
IBM인증 000-015시험문제 000-015 dump
NO.5 What is the purpose of a Condition Rate?
A.to create alternate paths in Workflows
B.to assign relative values to inventory items
C.to assign values to personnel for labor purposes
D.to indicate the costs associated with inventory items
Answer: B
IBM기출문제 000-015시험문제 000-015 dumps 000-015 000-015
NO.6 Where can a Meter Group be referenced?
A.Asset, Location, Rotating Item
B.Asset, Item Master, Service Item, Tools
C.Asset, Location, Preventive Maintenance
D.Asset, Preventive Maintenance, Condition Monitoring
Answer: A
IBM 000-015 000-015자료 000-015인증 000-015
NO.7 Which statement is correct?
A.Any type of Ticket or Work Order can be created from the Asset, Location and Configuration Item (CI)
applications.
B.A Service Request, Incident, Problem, Work Order, Change or Release in the Assets, Locations and CI
applications can be created.
C.A Service Request or Work Order can be created from the Assets and Locations applications. A Ticket
or Work Order cannot be created from the CI application.
D.Any type of Ticket or Work Order can be created from the Assets and Locations applications, but you
can not create an activity or task. A Ticket or Work Order cannot be created from the CI application.
Answer: B
IBM pdf 000-015시험문제 000-015 000-015
NO.8 What are the three types of meters?
A.Flow, Utility, Rate
B.Condition, Utility, Gauge
C.Continuous, Condition, Rate
D.Continuous, Gauge, Characteristic
Answer: D
IBM 000-015인증 000-015시험문제
NO.9 Which statement is true about Asset hierarchies?
A.A hierarchy of Assets can only be created by using the actions: Apply Item Assembly Structure and
Move/Modify Assets.
B.There are numerous ways of creating or modifying an Asset hierarchy including planning and then
executing a group of Asset moves from the Ticket-based applications.
C.When creating an Asset, it can be assigned a parent Asset. After the record is saved, the hierarchy can
be created from the Spare Parts tab or the action Move/Modify Assets.
D.Asset hierarchies can only be formed for rotating Assets. The most popular methods of creating the
hierarchy are to use the action Apply Item Assembly Structure and Move/Modify Assets in the Asset
application and Move/Swap/Modify in the Work Order Tracking application.
Answer: C
IBM자격증 000-015 000-015 000-015최신덤프 000-015기출문제 000-015인증
NO.10 What is a Failure Code hierarchy?
A.Problem, Cause, Remedy hierarchy based on a Work Classification
B.Problem, Cause, Remedy hierarchy based on an Asset Classification
C.Problem, Cause, Remedy hierarchy based on a Failure Classification
D.Problem, Cause, Remedy hierarchy based on a Location Classification
Answer: C
IBM 000-015 000-015 000-015 000-015
NO.11 What is a seasonal-based Preventive Maintenance (PM) record?
A.a PM that defines a period when the PM status is made inactive
B.a PM that defines the specific dates in the future upon which Work Order will be generated
C.a PM with a set of defined days of week or periods of time in a year when the PM is considered active
and is eligible for Work Order generation
D.a PM that defines the days of the week when a Work Order can be generated (for example, Saturday -
Sunday when the production line has stopped)
Answer: C
IBM 000-015 000-015
NO.12 From which three applications is it possible to create a Work Order? (Choose three.)
A.Assets
B.Routes
C.Job Plan
D.Work View
E.Configuration Items
F.Condition Monitoring
Answer: AEF
IBM 000-015 000-015인증
NO.13 When can Material Receipts be changed if inspection is not required?
A.prior to saving the Receipt Line
B.prior to inspecting the Receipt Line
C.prior to approving the Receipt Line
D.prior to completing the Receipt Line
Answer: A
IBM dump 000-015 000-015 000-015인증
NO.14 Which three statements are true about using the Move/Modify Assets or Swap Assets actions in the
Assets application? (Choose three.)
A.Any Asset can be moved to any site
B.Multiple Assets cannot be moved to another site in one action.
C.An Asset cannot be moved to another site if the Asset number already exists at that site.
D.Multiple Assets can be moved to the same Location or make these Assets a child of another Asset.
E.A hierarchy of Assets can be moved from one Location to another in the same site by selecting just the
top parent Asset.
F.A hierarchy of Assets can be moved into a storeroom by selecting just the top parent Asset, if all Assets
in the hierarchy are rotating.
Answer: DEF
IBM 000-015 000-015 000-015
NO.15 Which record type(s) can belong to a Collection?
A.Users
B.Asset, Location, Item
C.Asset, Location, Configuration Item
D.Asset, Actual Configuration Item, Deployed Asset, Configuration Item
Answer: C
IBM 000-015최신덤프 000-015 000-015 000-015자격증 000-015
NO.16 Which statement is correct?
A.When creating an Asset, it can be added directly to any storeroom by specifying a Location and rotating
item. The balance in the storeroom is incremented by one.
B.To add a rotating Asset to a storeroom, use the Inventory application and then use the Inventory
Adjustments - Current Balance action to increment the balance by one.
C.When creating an Asset, it can be added directly to a specific site's storeroom by specifying a Location
and rotating item. The balance in the storeroom is incremented by one.
D.When creating an Asset that will be initially held in a storeroom, the user creates the Asset then goes to
the Storeroom application in order to book it into a specific storeroom so that the balance is incremented
by one.
Answer: C
IBM 000-015덤프 000-015
NO.17 Which statement is true about a characteristic meter in the Condition Monitoring application?
A.Multiple action values can be entered that belong to an ALN domain. When an action value is recorded,
a Job Plan or a PM is used to generate a Work Order.
B.Multiple action values can be entered that belong to either an ALN or a Numeric domain. When an
action value is recorded, a PM is used to generate a Work Order.
C.An upper limit and a lower limit can be entered. When the last measurement is outside of these limits, a
Preventive Maintenance (PM) can be used to generate a Work Order.
D.When an action value is recorded, a Work Order can be generated using the specified Job Plan. Only
one of the values in the ALN domain can be used as an action value.
Answer: A
IBM 000-015자격증 000-015기출문제
NO.18 Which statement is true about the Users and Custodians functionality?
A.Users and Custodians can be created for Assets. A User is someone who uses the Asset. A Custodian
is someone responsible for the care of the Asset. For each person entered, the User field, the Custodian
field or both must be checked. One person can be nominated as the Primary Contact for the Asset.
B.Users and Custodians can be created for Assets and Locations. A User is someone who uses the Asset
or Location. A Custodian is someone responsible for the care of the Asset or Location. For each person
entered, either the User field or the Custodian field or both fields must be checked. One person can be
nominated as the Primary Contact for the Asset or Location.
C.User and Custodians can be created for Assets, Locations and Configuration Items (CIs). The dialog
box has a table window for creating Users and Custodians and another for creating Primary Contacts who
are used for communicating information about the Asset, Location or CI by email or bulletin board. A
person can be a user or a custodian, or both a user and a custodian.
D.Users and Custodians can be created for Assets and Locations. A User is someone who uses the
Asset. A Custodian is someone responsible for the care of the Asset. The Primary Contact is used for
communicating information about the Asset or Location by email or bulletin board. These three fields act
like a radio button, only one of them can be checked on each person record.
Answer: B
IBM pdf 000-015 000-015 000-015
NO.19 The appropriate status to invoke a Preventive Maintenance (PM) alert has been determined to be in the
Organization application.
What is the Select Action menu item where this can be set?
A.PM options
B.Asset options
C.System settings
D.Work Order options
Answer: A
IBM시험문제 000-015 000-015
NO.20 Which item type(s) can be used as a rotating item on both an Asset and a Location?
A.Item only
B.Item and Tool only
C.Item, Service Item, Tool
D.Item and Service Item only
Answer: B
IBM 000-015 000-015
NO.21 Which statement is correct?
A.The classification of a rotating Asset is determined from the classification belonging to its rotating item.
The value of an Asset specification record is always updateable.
B.The classification of a rotating Asset is determined from the classification belonging to its rotating item.
The value of an Asset specification record is determined from the corresponding attribute's value on the
item specification.
C.The classification of a rotating Asset can be entered by the user and the Asset specification is derived
from the classification you enter. The value of an attribute can be entered by the user. There is no
relationship with the item specification.
D.The classification of a rotating Asset is enterable only if its rotating item has no classification of its own.
When the classification has been entered by the user on the Asset, the attribute values are updateable.
Otherwise, they are read-only and are determined from the corresponding attribute's value on the item
specification.
Answer: B
IBM시험문제 000-015시험문제 000-015 000-015 dump
NO.22 Which field(s) are hidden on the Asset application and may need the Application Designer in order to
display them?
A.Priority
B.Failure Class
C.Calendar and Shift Number
D.GL Account, Warranty Expiry Date
Answer: D
IBM pdf 000-015 000-015 000-015 pdf 000-015 pdf 000-015시험문제
NO.23 Which statement about an Asset hierarchy is correct?
A.Once created, additional children can always be added to the hierarchy from the Spare Parts tab when
the parent Asset is the current record.
B.Once created, additional children can always be added to the hierarchy as long as the parent is a
rotating Asset, it is not decommissioned, and it is not in a storeroom.
C.An Asset hierarchy can be created from rotating and non-rotating Assets and can be set so that the
hierarchy can not be modified from the Spare Parts tab in the Asset application.
D.An Asset hierarchy can only be created from rotating Assets using the action Apply Item Assembly
Structure. The hierarchy can be locked so that it cannot be modified from the Spare Parts tab in the Asset
application.
Answer: C
IBM덤프 000-015 000-015
NO.24 Click the Exhibit button.
The diagram in the exhibit shows a dialog box that opens when the Select Value option is selected from
the Asset or Location field on a Service Request. The Filter By field has three options User/Custodian,
Public and All.
In which application can the default for this field be changed?
A.Organizations
B.Service Requests
C.Application Designer
D.Database Configuration
Answer: D
IBM 000-015 000-015
NO.25 When creating a purchase contract, what is the purpose of checking the Change Price on Use field?
A.It specifies that the price in the purchase order (PO) is only an estimated price.
B.It specifies that when a PO is issued against this contract, the price must be changed.
C.It specifies that the price of a given related item can be changed on related POs or purchase requests.
D.It specifies that the price of a given item specified in the Master Contract is reduced or increased, based
on market conditions.
Answer: C
IBM덤프 000-015자료 000-015 000-015 000-015최신덤프
NO.26 Where are Ticket Templates used?
A.Work Requests
B.Service Requests
C.Desktop Requisitions
D.Work Order Tracking
Answer: B
IBM자료 000-015 dump 000-015 dump 000-015자격증 000-015최신덤프
NO.27 What are the three main differences between the functions of the Move/Modify Assets and Swap
Assets actions in the Assets application and the Move/Swap/Modify action in the Work Order Tracking
application? (Choose three.)
A.Future Asset moves can be planned in the Move/Swap/Modify action.
B.Downtime can be applied to multiple Assets in the Move/Modify Assets action.
C.Meter readings for Assets and Locations can be entered in the Move/Swap/Modify action.
D.The specification records of a Location or a Configuration Item can be modified in the
Move/Swap/Modify action.
E.Future changes to the user and custodian records of Assets and Locations can be planned in the
Move/Swap/Modify action.
F.Modifications can be made to the fields, priority, failure class, calendar and shift and changes can be
applied to multiple Assets in the Move/Modify Assets action.
Answer: ADE
IBM자료 000-015최신덤프 000-015
NO.28 Which Asset fields must have data for the record to be saved to the database?
A.Site, Location, Type
B.Site, Status, Location
C.Site, Status, Asset Up?
D.Status, Location, Failure Class
Answer: C
IBM시험문제 000-015 000-015자격증
NO.29 Which statement about Condition Monitoring is the most accurate?
A.Multiple monitoring points can be created against the same Asset or Location. Before creating these
points, a meter of type Gauge or Characteristic must be defined.
B.Multiple monitoring points can be created against the same Asset. The meter type of these points will
be Gauge. A meter does not need to be created as this is created automatically.
C.Multiple monitoring points can be created against the same Asset. The Asset's current location is
provided as a reference. The point type needs to be specified as Gauge or Characteristic before entering
other details.
D.Multiple monitoring points can be created against the same Asset or Location. As each point is created,
a Gauge type meter for the measurements to be recorded against needs to be created. Characteristic
meters are not set up in Condition Monitoring, but on the Job Plan.
Answer: A
IBM dumps 000-015최신덤프 000-015
취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. IBM인증 000-015시험은 널리 인정받는 인기자격증의 시험과목입니다. IBM인증 000-015시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의IBM인증 000-015덤프는 시험패스율이 높아IBM인증 000-015시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.
댓글 없음:
댓글 쓰기