Juniper JN0-101 최신덤프

인터넷에는Juniper인증 JN0-101시험대비공부자료가 헤아릴수 없을 정도로 많습니다.이렇게 많은Juniper인증 JN0-101공부자료중 대부분 분들께서 저희ITExamDump를 선택하는 이유는 덤프 업데이트가 다른 사이트보다 빠르다는 것이 제일 큰 이유가 아닐가 싶습니다. ITExamDump의 Juniper인증 JN0-101덤프를 구매하시면 덤프가 업데이트되면 무료로 업데이트된 버전을 제공받을수 있습니다.

발달한 네트웨크 시대에 인터넷에 검색하면 많은Juniper인증 JN0-101시험공부자료가 검색되어 어느 자료로 시험준비를 해야 할지 망서이게 됩니다. 이 글을 보는 순간 다른 공부자료는 잊고ITExamDump의Juniper인증 JN0-101시험준비 덤프를 주목하세요. 최강 IT전문가팀이 가장 최근의Juniper인증 JN0-101 실제시험 문제를 연구하여 만든Juniper인증 JN0-101덤프는 기출문제와 예상문제의 모음 공부자료입니다. ITExamDump의Juniper인증 JN0-101덤프만 공부하면 시험패스의 높은 산을 넘을수 있습니다.

ITExamDump의Juniper인증JN0-101자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Juniper인증JN0-101시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.

시험 번호/코드: JN0-101
시험 이름: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)

우리ITExamDump에는 아주 엘리트 한 전문가들로 구성된 팀입니다 그들은 끈임 없는 연구와 자기자신만의 지식으로 많은 IT관연 덤프자료를 만들어 냄으로 여러분의 꿈을 이루어드립니다, 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Juniper JN0-101시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다. ITExamDump덤프들은 모두 보장하는 덤프들이며 여러분은 과감히 ITExamDump의 덤프를 장바구니에 넣으세요. ITExamDump에서 여러분의 꿈을 이루어 드립니다.

JN0-101 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-101.html

NO.1 What represents the binary equivalence of 207?
A.11001111
B.11101011
C.11010111
D.11010101
Answer: A

Juniper   JN0-101최신덤프   JN0-101   JN0-101덤프   JN0-101기출문제

NO.2 What is the default import routing for OSPF?
A.Accept all OSPF routes and install them into the 3 routing table
B.Accept all OSPF routes and install them into the inet7.0 routing table
C.Accept all OSPF routes and install them into the inet4.0 routing table
D.Accept all OSPF routes and install them into the inet.0 routing table
Answer: D

Juniper최신덤프   JN0-101인증   JN0-101   JN0-101 dump

NO.3 What is the default protocol preference for OSPF internal routes?
A.10
B.15
C.150
D.160
Answer: A

Juniper dumps   JN0-101   JN0-101

NO.4 You issue the ping interface t1-1/1/0 1.1.1.1 bypass-routing count 1000 rapid command
Which statement is correct?
A.The bypass-routing parameter is used to test the density on the T1 line
B.The bypass-routing parameter cannot be used on a T1 interface
C.The bypass-routing parameter allows you to ping a host through an interface that has no route through
it
D.The bypass-routing parameter allows you to ping a local WAN interface without generating any
outbound traffic
Answer: C

Juniper시험문제   JN0-101 dump   JN0-101

NO.5 You are the top of hierarchy and must configure OSPF on inteface so-0/0/0 unit 100.Which two
achieve this result? (Choose two)
A.set protocols set ospf area 0 set interface so-0/0/0.100
B.set protocols ospf area 0 interface so-0/0/0.100
C.edit protocols ospf interface so-0/0/0.100
D.edit protocols ospf area 0 set interface so-0/0/0.100
Answer: BD

Juniper   JN0-101자료   JN0-101   JN0-101 dump

NO.6 Given the routing entries shown in the exhibit, which next-hop IP address will be used for the
destination IP address 192.168.1.142? (Assume that only static routes are available for the destination)
A.10.20.106.10
B.10.20.14.131
C.10.18.1.1
D.10.20.14.130
Answer: D

Juniper   JN0-101자격증   JN0-101   JN0-101자격증

NO.7 Which two statements are true about the rescue configuration file? (Choose two)
A.It must include a root password
B.It is roll back file number 50, and you can recover it by issuing rollback 50
C.It is created by issuing request system configuration rescue save
D.It is updated automatically when you commit
Answer: AC

Juniper자격증   JN0-101기출문제   JN0-101최신덤프   JN0-101   JN0-101시험문제

NO.8 You have been asked to create a static route with a next hop that is not directly connected to the
router.Which configuration parameter enables the static route to accomplish this scenario?
A.resolve
B.indirect
C.next-hop
D.recursive
Answer: A

Juniper   JN0-101자격증   JN0-101인증   JN0-101 pdf

NO.9 You need to control SSH, HTTP, and Telnet access to an MX240 router through any interface.You have
decided to use a firewall filter.How should you apply the firewall filter?
A.as an outbound filter on interface fxp0
B.as an outbound filter on interface lo0
C.as an inbound filter on interface fxp0
D.as an inbound filter on interface lo0
Answer: D

Juniper덤프   JN0-101자격증   JN0-101 dump   JN0-101시험문제   JN0-101자격증   JN0-101 dump

NO.10 Referring to the exhibit, which type of classifier is being used in this CoS configuration?
[edit fireall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
form {
soruce-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}
}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
family inet {
filter {
input COS-CLASSIFIER
}
address 192.168.200.1/24;
}
}
A.behavior aggregate
B.policer
C.multifield
D.forward policy
Answer: C

Juniper   JN0-101시험문제   JN0-101자격증

NO.11 Which three protocols use UDP as a transport protocol by default? (Choose three)
A.HTTP
B.TFTP
C.DNS
D.SNMP
E.SMTP
Answer: BCD

Juniper pdf   JN0-101   JN0-101   JN0-101

NO.12 Which two statements are true about the forwarding table? (Choose two)
A.The forwarding table lists each source protocol and preference for each destination
B.The forwarding table constains only active routes
C.The forwarding table is used to process transit packets
D.The forwarding table is stored in compact flash
Answer: BC

Juniper자료   JN0-101   JN0-101   JN0-101시험문제

NO.13 Referring to the exhibit,
which two statements are true? (Choose two)
A.The route 192.168.1.0/25 is accepted
B.The route 192.168.2.0/25 is accepted
C.OSPF routes will be exported into RIP
D.RIP routes will be exported into OSPF
Answer: AD

Juniper   JN0-101   JN0-101시험문제   JN0-101인증

NO.14 Which account is used to access a Junos device in a factory-default configuration?
A.root
B.admin
C.juniper
D.user
Answer: A

Juniper인증   JN0-101시험문제   JN0-101기출문제   JN0-101

NO.15 Given the configuration and routing table in the exhibit, which routes will be advertised to OSPF
neighbors because of the demo policy?
A.192.168.0.0/16 only
B.192.168.0.0/17 only
C.192.168.50.0/24 and 192.168.51.0/24
D.192.168.0.0/17, 192.168.50.0/24 and 192.168.51.0/24
Answer: D

Juniper pdf   JN0-101기출문제   JN0-101   JN0-101   JN0-101   JN0-101

NO.16 Which command do you use to go from the shell prompt to the CLI prompt.?
A.run cli
B.cli
C.start cli
D.edit
Answer: B

Juniper자격증   JN0-101기출문제   JN0-101최신덤프   JN0-101인증   JN0-101 dump   JN0-101

NO.17 What must be configured prior to the first commit after factory defaults are loaded?
A.root authentication
B.default gateway
C.hostname
D.management services
Answer: A

Juniper최신덤프   JN0-101자료   JN0-101 dumps

NO.18 When using the monitor traffic command on Junos devices, which UNIX-based utility is accessed?
A.snoop
B.tcpdump
C.monitor
D.tail
Answer: C

Juniper   JN0-101   JN0-101 dumps

NO.19 Whitch three user authentication methos are supported by the Junos OS? (Choose three)
A.RADIUS
B.CHAP
C.local user database
D.tacacs+
E.PAP
Answer: ACD

Juniper dump   JN0-101최신덤프   JN0-101기출문제   JN0-101자격증

NO.20 What are two valid match criteria for a routing policy? (Choose two)
A.OSPF area ID
B.prefix list
C.port
D.time-to-live (TTL)
Answer: AB

Juniper dump   JN0-101시험문제   JN0-101   JN0-101   JN0-101시험문제

Juniper인증JN0-101시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. Juniper인증JN0-101시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.