ITExamDump덤프공부가이드는 업계에서 높은 인지도를 자랑하고 있습니다. ITExamDump제품은 업데이트가 가장 빠르고 적중율이 가장 높아 업계의 다른 IT공부자료 사이트보다 출중합니다. ITExamDump의Microsoft인증 70-562덤프는 이해하기 쉽고 모든Microsoft인증 70-562시험유형이 모두 포함되어 있어 덤프만 잘 이해하고 공부하시면 시험패스는 문제없습니다.
ITExamDump선택으로Microsoft 70-562시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Microsoft 70-562관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Microsoft 70-562덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.
성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Microsoft인증 70-562시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Microsoft인증 70-562덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.
만약Microsoft인증70-562시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Microsoft인증70-562시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다
시험 번호/코드: 70-562
시험 이름: Microsoft (TS: Microsoft .NET Framework 3.5, ASP.NET Application Development)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 133 문항
업데이트: 2013-12-18
우리ITExamDump 는 많은IT전문가들로 구성되었습니다. 우리의 문제와 답들은 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거이 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 우리ITExamDump는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서는 우리만의 이미지를 지키고 있습니다. 우리는 정확한 문제와답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록합니다.Microsoft 70-562인증시험을 응시하려는 분들은 저희 문제와 답으로 안심하시고 자신 있게 응시하시면 됩니다. 우리ITExamDump 는 여러분이 100%Microsoft 70-562인증시험을 패스할 수 있다는 것을 보장합니다.
우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Microsoft 70-562인증시험관련가이드로 효과적으로Microsoft 70-562시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.
Microsoft인증 70-562시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의Microsoft인증 70-562덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의Microsoft인증 70-562덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
70-562 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-562.html
NO.1 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application runs on Microsoft IIS 6.0.
You create a page named oldPage.aspx.
You need to ensure that the following requirements are met when a user attempts to access the page:
The browser diplays the URL of the oldPage.aspx page.
The browser displays the page named newPage.aspx
Which code segment should you use?
A. Server.Transfer("newPage.aspx");
B. Response.Redirect("newPage.aspx");
C. if (Request.Url.UserEscaped) {
Server.TransferRequest("newPage.aspx");
}
else {
Response.Redirect("newPage.aspx", true);
}
D. if (Request.Url.UserEscaped) {
Response.RedirectLocation = "oldPage.aspx";
Response.Redirect("newPage.aspx", true);
}
else {
Response.Redirect("newPage.aspx");
}
Answer: A
Microsoft 70-562자료 70-562기출문제 70-562 70-562 pdf 70-562
NO.2 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a custom Web user control named SharedControl. The control will be compiled as a library.
You write the following code segment for the SharedControl control. (Line numbers are included for
reference only.)
01 protected override void OnInit(EventArgs e)
02 {
03 base.OnInit(e);
04
05 }
All the master pages in the ASP.NET application contain the following directive.
<%@ Master Language="C#" EnableViewState="false" %>
You need to ensure that the state of the SharedControl control can persist on the pages that reference a
master page.
Which code segment should you insert at line 04?
A. Page.RegisterRequiresPostBack(this);
B. Page.RegisterRequiresControlState(this);
C. Page.UnregisterRequiresControlState(this);
D. Page.RegisterStartupScript("SharedControl","server");
Answer: B
Microsoft자료 70-562기출문제 70-562 70-562 70-562
NO.3 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The application contains the following device filter element in the Web.config file.
<filter name="isHtml" compare="PreferredRenderingType"argument="html32" />
The application contains a Web page that has the following image control. (Line numbers are included for
reference only.)
01 <mobile:Image ID="imgCtrl" Runat="server">
03 </mobile:Image>
You need to ensure that the following conditions are met:
The imgCtrl Image control displays he highRes.jpg file if the Web browser supports html.
The imgCtrl Image control displays lowRes.gif if the Web browser does not support html
Which DeviceSpecific element should you insert at line 02?
A. <DeviceSpecific>
<Choice Filter="isHtml" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
B. <DeviceSpecific>
<Choice Filter="isHtml" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="isHtml" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
C. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" ImageUrl="highRes.jpg" />
<Choice ImageUrl="lowRes.gif" />
</DeviceSpecific>
D. <DeviceSpecific>
<Choice Filter="PreferredRenderingType" Argument="false" ImageUrl="highRes.jpg" />
<Choice Filter="PreferredRenderingType" Argument="true" ImageUrl="lowRes.gif" />
</DeviceSpecific>
Answer: A
Microsoft 70-562덤프 70-562 70-562
NO.4 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment. (Line numbers are included for reference only.)
01 <asp:RequiredFieldValidator
02 ID="rfValidator1" runat="server"
03 Display="Dynamic" ControlToValidate="TextBox1"
04
05 >
06
07 </asp:RequiredFieldValidator>
08
09 <asp:ValidationSummary DisplayMode="List"
10 ID="ValidationSummary1" runat="server" />
You need to ensure that the error message displayed in the validation control is also displayed in the
validation summary list.
What should you do.?
A. Add the following code segment to line 06.
Required text in TextBox1
B. Add the following code segment to line 04.
Text="Required text in TextBox1"
C. Add the following code segment to line 04.
ErrorMessage="Required text in TextBox1"
D. Add the following code segment to line 04.
Text="Required text in TextBox1" ErrorMessage="ValidationSummary1"
Answer: C
Microsoft덤프 70-562 70-562자료 70-562 dump 70-562기출문제
NO.5 You modify an existing Microsoft ASP.NET application by using the Microsoft .NET Framework version
3.5.
You add a theme to the ASP.NET application.
You need to apply the theme to override any settings of individual controls.
What should you do?
A. In the Web.config file of the application, set the Theme attribute of the pages element to the name of
the theme.
B. In the Web.config file of the application, set the StyleSheetTheme attribute of the pages element to the
name of the theme.
C. Add a master page to the application. In the @Master directive, set the Theme attribute to the name of
the theme.
D. Add a master page to the application. In the @Master directive, set the StyleSheetTheme attribute to
the name of the theme.
Answer: A
Microsoft기출문제 70-562 70-562 dumps
NO.6 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create two user controls named UserCtrlA.ascx and UserCtrlB.ascx. The user controls postback to
the server.
You create a new Web page that has the following ASPX code.
<asp:CheckBox ID="Chk" runat="server" oncheckedchanged="Chk_CheckedChanged"
AutoPostBack="true" />
<asp:PlaceHolder ID="PlHolder" runat="server"></asp:PlaceHolder>
To dynamically create the user controls, you write the following code segment for the Web page.
public void LoadControls() {
if (ViewState["CtrlA"] != null) {
Control c;
if ((bool)ViewState["CtrlA"] == true) {
c = LoadControl("UserCtrlA.ascx"); }
else {
c = LoadControl("UserCtrlB.ascx");
}
ID = "Ctrl";
PlHolder.Controls.Add(c);
}
}
protected void Chk_CheckedChanged(object sender, EventArgs e) {
ViewState["CtrlA"] = Chk.Checked;
PlHolder.Controls.Clear();
LoadControls();
}
You need to ensure that the user control that is displayed meets the following requirements:
It is recreated during postback
It retains its state.
Which method should you add to the Web page?
A. protected override object SaveViewState()
{
LoadControls();
return base.SaveViewState();
}
B. protected override void Render(HtmlTextWriter writer) {
LoadControls();
base.Render(writer);
}
C. protected override void OnLoadComplete(EventArgs e) {
base.OnLoadComplete(e);
LoadControls();
}
D. protected override void LoadViewState(object savedState) {
base.LoadViewState(savedState);
LoadControls();
}
Answer: D
Microsoft 70-562자격증 70-562
NO.7 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
When you review the application performance counters, you discover that there is an unexpected
increase in the value of the Application Restarts counter.
You need to identify the reasons for this increase.
What are three possible reasons that could cause this increase? (Each correct answer presents a
complete solution. Choose three.)
A. Restart of the Microsoft IIS 6.0 host.
B. Restart of the Microsoft Windows Server 2003 that hosts the Web application.
C. Addition of a new assembly in the Bin directory of the application.
D. Addition of a code segment that requires recompilation to the ASP.NET Web application.
E. Enabling of HTTP compression in the Microsoft IIS 6.0 manager for the application.
F. Modification to the Web.config file in the system.web section for debugging the application.
Answer: CDF
Microsoft 70-562 dump 70-562
NO.8 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application has a Web form file named MovieReviews.aspx.
The MovieReviews.aspx file connects to a LinqDataSource DataSource named LinqDataSource1 that
has a primary key named MovieID.
The application has a DetailsView control named DetailsView1.
The MovieReviews.aspx file contains the following code fragment. (Line numbers are included for
reference only.)
01 <asp:DetailsView ID="DetailsView1" runat="server" DataSourceID="LinqDataSource1"
02
03 />
04 <Fields>
05 <asp:BoundField DataField="MovieID" HeaderText="MovieID" InsertVisible="False"
ReadOnly="True" SortExpression="MovieID" />
06 <asp:BoundField DataField="Title" HeaderText="Title" SortExpression="Title" />
07 <asp:BoundField DataField="Theater" HeaderText="Theater" SortExpression="Theater" />
08 <asp:CommandField ShowDeleteButton="false" ShowEditButton="True"
ShowInsertButton="True" />
09 </Fields>
10 </asp:DetailsView>
You need to ensure that the users can insert and update content in the DetailsView1 control.
You also need to prevent duplication of the link button controls for the Edit and New operations.
Which code segment should you insert at line 02?
A. AllowPaging="false"
AutoGenerateRows="false"
B. AllowPaging="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
C. AllowPaging="true"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
D. AllowPaging="false"
AutoGenerateDeleteButton="false"
AutoGenerateEditButton="true"
AutoGenerateInsertButton="true"
AutoGenerateRows="false"
DataKeyNames="MovieID"
Answer: B
Microsoft 70-562 70-562 pdf
NO.9 You create a Microsoft ASP.NET application by using the Microsoft .NET
Framework version 3.5.
You add a TextBox control named TextBox1.
You write the following code segment for validation.
protected void CustomValidator1_ServerValidate(object source, ServerValidateEventArgs args) {
DateTime dt = String.IsNullOrEmpty(args.Value) ? DateTime.Now :
Convert.ToDateTime(args.Value);
args.IsValid = (DateTime.Now - dt).Days < 10;
}
You need to validate the value of TextBox1.
Which code fragment should you add to the Web page?
A. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
EnableClientScript="false" InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
B. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" ValueToCompare="<%= DateTime.Now; %>">
</asp:CompareValidator>
C. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:RequiredFieldValidator ID="RequiredFieldValidator1" runat="server" ControlToValidate="TextBox1"
InitialValue="<%= DateTime.Now; %>" >
</asp:RequiredFieldValidator>
D. <asp:CustomValidator ID="CustomValidator1" runat="server" ControlToValidate="TextBox1"
ValidateEmptyText="True" onservervalidate="CustomValidator1_ServerValidate">
</asp:CustomValidator>
<asp:CompareValidator ID="CompareValidator1" runat="server" Type="Date" EnableClientScript="true"
ControlToValidate="TextBox1" Operator="DataTypeCheck" >
</asp:CompareValidator>
Answer: B
Microsoft 70-562 70-562 70-562기출문제 70-562 70-562자료
NO.10 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named Default.aspx in the root of the application. You add an
ImageResources.resx resource file in the App_GlobalResources folder. The ImageResources.resx file
contains a localized resource named LogoImageUrl.
You need to retrieve the value of LogoImageUrl.
Which code segment should you use?
A. string logoImageUrl = (string)GetLocalResourceObject("LogoImageUrl");
B. string logoImageUrl = (string)GetGlobalResourceObject("Default", "LogoImageUrl");
C. string logoImageUrl = (string)GetGlobalResourceObject("ImageResources", "LogoImageUrl");
D. string logoImageUrl = (string)GetLocalResourceObject("ImageResources.LogoImageUrl");
Answer: C
Microsoft덤프 70-562덤프 70-562시험문제 70-562
NO.11 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create the following controls:
A composite custom control named MyControl.
A templated custom control named OrderFormData.
You write the following code segment to override the method named CreateChildControls() in the
MyControl class. (Line numbers are included for reference only.)
01 protected override void CreateChildControls() {
02 Controls.Clear();
03 OrderFormData oFData = new OrderFormData("OrderForm");
04
05 }
You need to add the OrderFormData control to the MyControl control.
Which code segment should you insert at line 04?
A. Controls.Add(oFData);
B. Template.InstantiateIn(this);
Template.InstantiateIn(oFData);
C. Controls.Add(oFData);
this.Controls.Add(oFData);
D. this.TemplateControl = (TemplateControl)Template;
oFData.TemplateControl = (TemplateControl)Template;
Controls.Add(oFData);
Answer: B
Microsoft 70-562인증 70-562 70-562 pdf
NO.12 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. You
create a Web page that contains the following two XML fragments. (Line numbers are included for
reference only.)
01 <script runat="server">
02
03 </script>
04 <asp:ListView ID="ListView1" runat="server"
05 DataSourceID="SqlDataSource1"
06
07 >
08 <ItemTemplate>
09 <td>
10 <asp:Label ID="LineTotalLabel" runat="server" Text='<%# Eval("LineTotal") %>' />
11 </td>
12 </ItemTemplate>
The SqlDataSource1 object retrieves the data from a Microsoft SQL Server 2005 database table. The
database table has a column named LineTotal.
You need to ensure that when the size of the LineTotal column value is greater than seven characters, the
column is displayed in red color.
What should you do?
A. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotalLabel");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
B. Insert the following code segment at line 06.
OnItemDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr (object sender, ListViewItemEventArgs e) {
Label LineTotal = (Label)e.Item.FindControl("LineTotal");
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
C. Insert the following code segment at line 06.
OnDataBinding="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotal";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
D. Insert the following code segment at line 06.
OnDataBound="FmtClr"
Insert the following code segment at line 02.
protected void FmtClr(object sender, EventArgs e) {
Label LineTotal = new Label();
LineTotal.ID = "LineTotalLabel";
if ( LineTotal.Text.Length > 7) {
LineTotal.ForeColor = Color.Red;
}
else {
LineTotal.ForeColor = Color.Black;
}
}
Answer: A
Microsoft 70-562자격증 70-562 70-562 pdf 70-562
NO.13 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code segment to create a class named MultimediaDownloader that implements
the IHttpHandler interface.
namespace Contoso.Web.UI {
public class MultimediaDownloader : IHttpHandler {
...
}
}
The MultimediaDownloader class performs the following tasks:
It returns the content of the multimedia files from the Web server
It processes requests for the files that have the .media file extension
The .media file extension is mapped to the aspnet_isapi.dll file in Microsoft IIS 6.0.
You need to configure the MultimediaDownloader class in the Web.config file of the application.
Which code fragment should you use?
A. <httpHandlers>
<add verb="*.media" path="*" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
B. <httpHandlers>
<add verb="HEAD" path="*.media" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
C. <httpHandlers>
<add verb="*" path="*.media" validate="false" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
D. <httpHandlers>
<add verb="GET,POST" path="*" validate="true" type="Contoso.Web.UI.MultimediaDownloader" />
</httpHandlers>
Answer: C
Microsoft 70-562 70-562 dump 70-562자료
NO.14 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add an XmlDataSource control named XmlDataSource1 to the Web page. XmlDataSource1 is bound
to an XML document with the following structure.
<?xml version="1.0" encoding="utf-8" ?>
<clients>
<client ID="1" Name="John Evans" />
<client ID="2" Name="Mike Miller"/>
...
</clients>
You also write the following code segment in the code-behind file of the Web page.
protected void BulletedList1_Click(object sender, BulletedListEventArgs e) {
//...
}
You need to add a BulletedList control named BulletedList1 to the Web page that is bound to
XmlDataSource1.
Which code fragment should you use?
A. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSource="XmlDataSource1"
DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
B. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="Name" DataMember="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
C. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="LinkButton"
DataSourceID="XmlDataSource1" DataTextField="Name" DataValueField="ID"
onclick="BulletedList1_Click">
</asp:BulletedList>
D. <asp:BulletedList ID="BulletedList1" runat="server" DisplayMode="HyperLink"
DataSourceID="XmlDataSource1" DataTextField="ID" DataValueField="Name"
onclick="BulletedList1_Click">
</asp:BulletedList>
Answer: C
Microsoft dump 70-562 70-562덤프
NO.15 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You add the following code fragment to the Web.config file of the application (Line numbers are
includedfor reference only).
01 <healthMonitoring>
02 <providers>
03 <add name="EventLogProvider"
type="System.Web.Management.EventLogWebEventProvider />
04 <add name="WmiWebEventProvider"
type="System.Web.Management.WmiWebEventProvider />
05 </providers>
06 <eventMappings>
07
08 </eventMappings>
09 <rules>
10 <add name="Security Rule" eventName="Security Event" provider="WmiWebEventProvider"
/>
11 <add name="AppError Rule" eventName="AppError Event" provider="EventLogProvider" />
12 </rules>
13 </healthMonitoring>
You need to configure Web Events to meet the following requirements:
Security-related Web Events are mapped to Microsoft Windows Management Instrumentation (WMI)
events.
Web Events caused by problems with configuration or application code are logged into the Windows
Application Event Log.
Which code fragment should you insert at line 07?
A. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
B. <add name="Security Event" type="System.Web.Management.WebAuditEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
C. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebRequestErrorEvent"/>
D. <add name="Security Event" type="System.Web.Management.WebApplicationLifetimeEvent"/>
<add name="AppError Event" type="System.Web.Management.WebErrorEvent"/>
Answer: B
Microsoft 70-562자격증 70-562시험문제 70-562자료
NO.16 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You write the following code fragment.
<asp:DropDownList AutoPostBack="true" ID="DropDownList1" runat="server"
onselectedindexchanged="DropDownList1_SelectedIndexChanged">
<asp:ListItem>1</asp:ListItem>
<asp:ListItem>2</asp:ListItem>
<asp:ListItem>3</asp:ListItem>
</asp:DropDownList>
You also add a MultiView control named MultiView1 to the Web page. MultiView1 has three child View
controls.
You need to ensure that you can select the View controls by using the DropDownList1 DropDownList
control.
Which code segment should you use?
A. int idx = DropDownList1.SelectedIndex;
MultiView1.ActiveViewIndex = idx;
B. int idx = DropDownList1.SelectedIndex;
MultiView1.Views[idx].Visible = true;
C. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.ActiveViewIndex = idx;
D. int idx = int.Parse(DropDownList1.SelectedValue);
MultiView1.Views[idx].Visible = true;
Answer: A
Microsoft인증 70-562 70-562최신덤프 70-562 70-562 pdf
NO.17 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
You create a Web page named enterName.aspx. The Web page contains a TextBox control named
txtName. The Web page cross posts to a page named displayName.aspx that contains a Label control
named lblName.
You need to ensure that the lblName Label control displays the text that was entered in the txtName
TextBox control.
Which code segment should you use?
A. lblName.Text = Request.QueryString["txtName"];
B. TextBox txtName = FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
C. TextBox txtName = Parent.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
D. TextBox txtName = PreviousPage.FindControl("txtName") as TextBox;
lblName.Text = txtName.Text;
Answer: D
Microsoft 70-562 pdf 70-562 70-562 pdf 70-562
NO.18 You create a Microsoft ASP.NET Web application by using the Microsoft .NET Framework version 3.5.
The Web site uses C# as the programming language. You plan to add a code file written in Microsoft
VB.NET to the application. This code segment will not be converted to C#.
You add the following code fragment to the Web.config file of the application.
<compilation debug="false">
<codeSubDirectories>
<add directoryName="VBCode"/>
</codeSubDirectories>
</compilation>
You need to ensure that the following requirements are met:
The existing VB.NET file can be used in the Web application
The file can be modified and compiled at run time
What should you do?
A. Create a new class library that uses VB.NET as the programming language.
Add the VB.NET code file to the class library. Add a reference to the class library in the application.
B. Create a new folder named VBCode at the root of the application. Place the VB.NET code file in this
new folder.
C. Create a new Microsoft Windows Communication Foundation (WCF) service project that uses VB.NET
as the programming language. Expose the VB.NET code functionality through the WCF service. Add a
service reference to the WCF service project in the application.
D. Create a new folder named VBCode inside the App_Code folder of the application. Place the VB.NET
code file in this new folder.
Answer: D
Microsoft자료 70-562 70-562인증 70-562 70-562
NO.19 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5.
The application must redirect the original URL to a different ASPX page.
You need to ensure that the users cannot view the original URL after the page is executed.
You also need to ensure that each page execution requires only one request from the client browser.
What should you do?
A. Use the Server.Transfer method to transfer execution to the correct ASPX page.
B. Use the Response.Redirect method to transfer execution to the correct ASPX page.
C. Use the HttpContext.Current.RewritePath method to transfer execution to the correct ASPX page.
D. Add the Location: new URL value to the Response.Headers collection. Call the Response.End()
statement. Send the header to the client computer to transfer execution to the correct ASPX page.
Answer: C
Microsoft인증 70-562 70-562 70-562 70-562 dump 70-562기출문제
NO.20 You create a Microsoft ASP.NET application by using the Microsoft .NET Framework version 3.5. The
application has a mobile Web form that contains the following ObjectList control.
<mobile:ObjectList ID="ObjectListCtrl" OnItemCommand="ObjectListCtrl_ItemCommand"
Runat="server">
<Command Name="CmdDisplayDetails" Text="Details" />
<Command Name="CmdRemove" Text="Remove" />
</mobile:ObjectList>
You create an event handler named ObjectListCtrl_ItemCommand.
You need to ensure that the ObjectListCtrl_ItemCommand handler detects the selection of the
CmdDisplayDetails item.
Which code segment should you write?
A. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandName == "CmdDisplayDetails") {
}
}
B. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
if (e.CommandArgument.ToString() == "CmdDisplayDetails") {
}
}
C. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = sender as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
D. public void ObjectListCtrl_ItemCommand(object sender, ObjectListCommandEventArgs e) {
ObjectListCommand cmd = e.CommandSource as ObjectListCommand;
if (cmd.Name == "CmdDisplayDetails") {
}
}
Answer: A
Microsoft자격증 70-562 70-562 70-562인증 70-562
ITexamdump의 00M-663덤프의 VCE테스트프로그램과 HP2-H29덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-593시험에 대비한 고품질 덤프와 70-687시험 최신버전덤프를 제공해드립니다. 최고품질 000-455시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기