많은 사이트에서 RedHat인증 RH202시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의RedHat인증 RH202덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
최근 RedHat인증 RH202시험이 IT업계에서 제일 높은 인지도를 가지고 있습니다.바라만 보지 마시고RedHat인증 RH202시험에 도전해보세요. ITExamDump 의 RedHat인증 RH202덤프로 시험준비공부를 하시면 한방에 시험패스 가능합니다. RedHat인증 RH202덤프로 자격증취득에 가까워지고 나아가서는 IT업계에서 인정을 받는 열쇠를 소유한것과 같다고 할수 있습니다.
ITExamDump의RedHat인증 RH202덤프는 인터넷에서 검색되는RedHat인증 RH202시험공부자료중 가장 출중한 시험준비 자료입니다. RedHat인증 RH202덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.
시험 번호/코드: RH202
시험 이름: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 171 문항
업데이트: 2013-12-23
만약 시험만 응시하고 싶으시다면 우리의 최신RedHat RH202자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는RedHat RH202인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의RedHat RH202시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
인테넷에 검색하면 RedHat RH202시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의RedHat RH202제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.
만약 여러분은RedHat RH202인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만RedHat RH202패스는 쉬운 일은 아닙니다.RedHat RH202패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
RedHat RH202인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.RedHat RH202인증시험에 대한 열기는 식지 않습니다.RedHat RH202자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.
RH202 덤프무료샘플다운로드하기: http://www.itexamdump.com/RH202.html
NO.1 vi /etc/fstab
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.2 Press P to verify the partitions lists and remember the partitions name.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.3 CORRECT TEXT
Change the root Password to redtophat
Answer and Explanation:Boot the system in Single user modeUse the passwd command
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.4 Use mkfs -t ext3 /dev/hda? Where ? is your partition number
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.5 /dev/hda? /mnt/neo ext3 defaults 1 2
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.6 CORRECT TEXT
Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com ¨¤ This will set the host name oly for current session. To set
hostname permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.7 Either Reboot or use partprobe command.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.8 CORRECT TEXT
Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤ To create new partition.
2. Type n ¨¤ For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.9 Verify by mounting on current Sessions also:
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.10 CORRECT TEXT
You are giving RHCT Exam and in your Exam paper there is a question written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network ¨¤What, What is written here. Actually here are these parameters
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
-Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.11 Write:
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.12 CORRECT TEXT
Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is
172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
# dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer
translate domain names such as www.redhat.com to IP addresses such as 216.148.218.197. As
no individual DNS server is large enough to keep a database for the entire Internet, they can refer
requests to other DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium
Users wants to access by name so DNS will interpret the name into ip address. You need to
specify the Address if DNS server in each and every client machine. In Redhat Enterprise Linux,
you need to specify the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.13 Or
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.14 CORRECT TEXT
The System you are using is for NFS (Network File Services). Some important data are shared from your
system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session,we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.15 Type the Size: +100M ¨¤ You can Specify either Last cylinder of Size her.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.16 mount /dev/hda? /mnt/neo
4.CORRECT TEXT
Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the IP
Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will
take the value from /etc/sysctl.conf.
5.CORRECT TEXT
Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6.CORRECT TEXT
neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky question from redhat. Actually question is giving scenario to you to implement quota to neo
user. You should apply the quota to neo user on /home that neo user shouldn't occupied space more than
70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0 ¨¤ To enale the quota on filesystem you should mount
the filesystem with usrquota for user quota and grpquota for group quota.
2. touch /home/aquota.user ¨¤Creating blank quota database file.
3. mount -o remount /home ¨¤ Remounting the /home with update
mount options. You can verify that
/home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ¨¤ Initialization the quota on /home
5. edquota -u neo /home ¨¤ Quota Policy editor
See the snapshot
1 Disk quotas for user neo (uid 500):
2.Filesystem blocks soft hard inodes soft hard
4 /dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7.CORRECT TEXT
One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial Size
of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without losing
any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the
size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical
Volume without unmount as well as we can bring the actual size of Logical Volume on online using
ext2online command.
8.CORRECT TEXT
Quota is implemented on /data but not working properly. Find out the
Problem and implement the quota to user1 to have a soft limit 60 inodes
(files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems. Without quotas, one or more users
can upload files on an FTP server to the point of filling a filesystem. Once the affected partition is full,
other users are effectively denied upload access to
the disk. This is also a reason to mount different filesystem directories on different partitions. For example,
if you only had partitions for your root (/) directory and swap space, someone uploading to your computer
could fill up all of the space in your root directory (/). Without at least a little free space in the root directory
(/), your system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobyte-sized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system. Older versions
of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab
/dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data
and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9 CORRECT TEXT
One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume
500M without losing any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equal-sized chunks known as
Physical Extents (PE). As there are several other concepts associated with the LVM system, let's start
with some basic definitions:
* Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
* Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized
PEs. Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
* Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
* Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home
and /var on an LV.
* Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 ¨¤ to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10 CORRECT TEXT
Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤To create new partition.
2. Type n ¨¤For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ¨¤You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Ormke2fs -j /dev/hda? ¨¤ To create ext3 filesystem
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11.CORRECT TEXT
You are new System Administrator and from now you are going to handle the system and yourmain task is
Network monitoring, Backup and Restore. But you don't know the root password.
Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode.
You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12.CORRECT TEXT
There are more then 400 Computers in your Office. You are appointed as a System Administrator.
But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you
enable IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf ¨¤when System Reboot on next tme, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13.CORRECT TEXT
You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's giving
error to load X window System. How will you fix that problem and make boot successfully run X Window
System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp ¨¤ /tmp is full remove the unnecessary file
2. quota username ¨¤if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3.¨¤you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display ¨¤ It will display a dialog o configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14.CORRECT TEXT
There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP
Address are assigned on that Server. How will make successfully ping to 192.168.1.0/24
Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
15.CORRECT TEXT
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ¨¤To create new partition.Type n ¨¤ For New partitionIt will ask foLogical or
Primary Partitions. Press l for logical.It will ask for the Starting Cylinder: Use the Default by
pressing Enter Key.Type the Size: +100M ¨¤ You can Speciy either Last cylinder of Size
here.Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.Type t to change the System ID of partition.Type Partition
NumberType 82 that means Linux Swap.Press w to write on partitions table.Either Reboot or use
partprobe command.mkswap /dev/hda?¨¤ To create Swap File system on partition.swapon
/dev/hda?¨¤ To enable the Swap space from partition.free-m ¨¤ Verify Either Swap is enabled or
not.vi /etc/fstab
/dev/hda? swap swap defaults 0 0Reboot the System and verify that swap is automatically
enabled or not.
16.CORRECT TEXT
You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from other host
configure:vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
service syslog restart
17.CORRECT TEXT
You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You
changed the root password, again unable to login as a root. How will you make Successfully Login as a
root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:
3. Boot the System on Single user mode.
4. Change the password
5. Check the account expire date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
4. Check the file /etc/securetty ¨¤ Which file blocked to root login from certain terminal.
5. If terminal is deleted or commented write new or uncomment.
6. Reboot the system and login as a root.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.17 Press w to write on partitions table.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.18 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.19 mke2fs -j /dev/hda? ¨¤ To create ext3 filesystem.
RedHat인증 RH202 RH202 dumps RH202 RH202
NO.20 mkdir /mnt/neo
RedHat인증 RH202 RH202 dumps RH202 RH202
ITexamdump의 000-657덤프의 VCE테스트프로그램과 C_HANASUP_1덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-129시험에 대비한 고품질 덤프와 70-466시험 최신버전덤프를 제공해드립니다. 최고품질 MSC-321시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기