ITExamDump의 HP인증 HP0-Y19덤프는 최근 유행인 PDF버전과 소프트웨어버전 두가지 버전으로 제공됩니다.PDF버전을 먼저 공부하고 소프트웨어번으로 PDF버전의 내용을 얼마나 기억하였는지 테스트할수 있습니다. 두 버전을 모두 구입하시면 시험에서 고득점으로 패스가능합니다.
HP인증 HP0-Y19시험을 패스하고 싶다면ITExamDump에서 출시한HP인증 HP0-Y19덤프가 필수이겠죠. HP인증 HP0-Y19시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이HP인증 HP0-Y19시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한HP인증 HP0-Y19덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의HP인증 HP0-Y19공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면HP인증 HP0-Y19시험패스가 어렵지 않고 자격증취득이 쉬워집니다.
많은 사이트에서 HP인증 HP0-Y19시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의HP인증 HP0-Y19덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
ITExamDump의 HP인증 HP0-Y19시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 HP인증 HP0-Y19덤프가 신뢰성을 다시 한번 인증해주는것입니다. HP인증 HP0-Y19시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 HP인증 HP0-Y19덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.
HP인증 HP0-Y19시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신HP인증 HP0-Y19시험에 대비한HP인증 HP0-Y19덤프를 발췌하였습니다. HP인증 HP0-Y19덤프는HP인증 HP0-Y19시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 HP인증 HP0-Y19덤프를 추천합니다.
현재 경쟁울이 심한IT시대에,HP HP0-Y19자격증 취득만으로 이 경쟁이 심한 사회에서 자신만의위치를 보장할수 있고 더욱이는 한층업된 삶을 누릴수 있을수도 있습니다. 우리ITExamDump 에서 여러분은HP HP0-Y19관련 학습지도서를 얻을 수 있습니다. 우리ITExamDump는 IT업계엘리트 한 강사들이 퍼펙트한HP HP0-Y19문제집을 만들어서 제공합니다. 우리가 제공하는HP HP0-Y19문제와 답으로 여러분은 한번에 성공적으로 시험을 패스 하실수 있습니다. 중요한것 저희 문제집을 선택함으로 여러분의 시간도 절약해드리고 무엇보다도 많은 근심없이 심플하게 시험을 패스하여 좋다는 점입니다.
시험 번호/코드: HP0-Y19
시험 이름: HP (ProCurve Accelerated ASE Mobility)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 63 문항
업데이트: 2014-04-21
HP0-Y19 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y19.html
NO.1 Click the Exhibit button. What does this output from the show ip ospf neighbor command
indicate about the OSPF neighbor relationship between this router and the router with ID 10.3.0.1?
A.They are in different OSPF areas.
B.They have not formed an adjacency.
C.They are configured with different OSPF versions.
D.They are not eligible to be elected DR or BDR.
Correct:B
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.2 You are planning a network upgrade at a small company. During a meeting, you learn that the
customer will install VoIP telephones that set Layer 2 priority markers for allvoice traffic, and the
VoIP traffic will not cross any routed links. What is necessary to ensure that ProVision ASIC
switches maintain the priorities set by the phones? (Selecttwo.)
A.LLDP-MED for all voice VLANs
B.an IEEE 802.1p-to-DSCP map for voice traffic
C.port-based priorities for ports connected to phones
D.default QoS settings
E.tagged links for all voice VLAN traffic
Correct:D E
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.3 Click the Exhibit button. What is the role of this Switch 3500yl in the OSPF routing domain?
A.ASBR
B.virtual router
C.ABR
D.internal router
Correct:D
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.4 You connect an IP telephone that supports LLDP-MED to a port on a ProCurve Switch 5406zl.
The port is a member of a voice VLAN and also requires 802.1X authentication. How will
LLDP-MED and 802.1X interact?
A.The switch will exempt the phone from the 802.1X requirement after confirming its LLDP-MED
information.
B.The switch will submit the phone's authentication credentials to a RADIUS server after the devices
exchange LLDP-MED information.
C.The switch will permit LLDP-MED communication with the phone after authentication is complete.
D.The switch will use information from the phone's first LLDP-MED frame to submit its authentication
credentials.
Correct:C
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.5 Which part of the multicast address range is reserved for applications that will remain within an
enterprise intranet?
A.Internetwork Control Block
B.AD-HOC Block
C.Administratively Scoped Address Block
D.Local Network Control Block
Correct:C
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.6 You configured VLAN 10 and VLAN 24 on a ProCurve Switch 3500yl-48G. The network servers
reside in VLAN 10, which has an IP address range of 10.1.10.0/24. Network clients reside in VLAN
24, which has an IP address range of 10.1.24.0/24. You configure an ACL with these entries and
apply it statically to ports in VLAN 24: permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq ftp
permit tcp 10.1.24.0 0.0.0.0 10.1.10.10 255.255.255.255 eq http permit tcp 10.1.24.0 0.0.0.0
10.1.10.10 255.255.255.255 eq telnet What is the effect of these ACLs on the clients located in
VLAN 24?
A.They would have no access at all, because the ACL is misconfigured.
B.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but no access anywhere else.
C.They would be allowed only FTP, HTTP, and Telnet access to 10.1.10.10, but full access to everything
else in the 10.1.10.0 subnet.
D.They could not access anything in the 10.1.10.0 subnet, because IP has not been specified in the ACL.
Correct:B
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.7 On a ProCurve Switch 8212zl, which feature must be enabled before you can enable VRRP?
A.MSTP
B.IP routing
C.IP multicast
D.RIP
Correct:B
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.8 You must configure Multiple Spanning Tree Protocol (MSTP) on two ProCurve 8212zl switches
and four 5406zl switches. Which configuration is necessary to ensure that all of the switches join
the same MST region?
A.The switches must have identical Port Priorities for shared links in each MST instance.
B.Bridge Priorities on all switches must be configured so that each MST instance has a different Root
Bridge.
C.All switch-to-switch links in each MST instance must be tagged members of all user VLANs.
D.The switches must be configured with identical config-names, config-revisions, and VLAN-to-instance
mappings.
Correct:D
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.9 Port C1 on a ProCurve Switch 5412zl is a tagged member of VLAN 50 and an untagged member
of VLAN 1. Port C2 and port C3 are at default VLAN settings. What is the effect of the following
command entered at the CLI? 5412zl(config)# trunk c1-c3 trk1
A.The trunk is defined as an untagged member of VLAN 1, but port C1 is not included.
B.The trunk is not defined, because the ports' VLAN memberships do not match.
C.The trunk is defined as an untagged member of VLAN 1 and a tagged member of VLAN 50.
D.The trunk is defined as an untagged member of VLAN 1 but is not a member of VLAN 50.
Correct:D
HP HP0-Y19 dump HP0-Y19 HP0-Y19
NO.10 You must configure a ProCurve Switch 8212zl to be the Backup router for a VRID associated
with VLAN 10. What must be true of the virtual IP address for the VRID on this router?
A.It must be an address assigned to a multi-netted interface.
B.It must be an address that is not assigned to any interface on either router.
C.It must match the Backup router's address for the VLAN 10 interface.
D.It must match the Owner router's address for the VLAN 10 interface.
Correct:D
HP HP0-Y19 dump HP0-Y19 HP0-Y19
ITexamdump의 642-457덤프의 VCE테스트프로그램과 HH0-240덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-593시험에 대비한 고품질 덤프와 E20-553시험 최신버전덤프를 제공해드립니다. 최고품질 1Y0-200시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기