Symantec인증 ST0-090시험을 패스하고 싶다면ITExamDump에서 출시한Symantec인증 ST0-090덤프가 필수이겠죠. Symantec인증 ST0-090시험을 통과하여 원하는 자격증을 취득하시면 회사에서 자기만의 위치를 단단하게 하여 인정을 받을수 있습니다.이 점이 바로 많은 IT인사들이Symantec인증 ST0-090시험에 도전하는 원인이 아닐가 싶습니다. ITExamDump에서 출시한Symantec인증 ST0-090덤프 실제시험의 거의 모든 문제를 커버하고 있어 최고의 인기와 사랑을 받고 있습니다. 어느사이트의Symantec인증 ST0-090공부자료도ITExamDump제품을 대체할수 없습니다.학원등록 필요없이 다른 공부자료 필요없이 덤프에 있는 문제만 완벽하게 공부하신다면Symantec인증 ST0-090시험패스가 어렵지 않고 자격증취득이 쉬워집니다.
ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. Symantec 인증ST0-090덤프 무료샘플을 다운받아 체험해보세요.
ITExamDump는 여러분이 Symantec인증ST0-090시험 패스와 추후사업에 모두 도움이 되겠습니다.ITExamDump제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. Symantec인증ST0-090 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이Symantec인증ST0-090시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump Symantec인증ST0-090인증시험자료는 100% 패스보장을 드립니다
여러분이 어떤 업계에서 어떤 일을 하든지 모두 항상 업그레이되는 자신을 원할 것입니다.,it업계에서도 이러합니다.모두 자기자신의 업그레이는 물론 자기만의 공간이 있기를 바랍니다.전문적인 IT인사들은 모두 아시다싶이Symantec ST0-090인증시험이 여러분의 이러한 요구를 만족시켜드립니다.그리고 우리 ITExamDump는 이러한 꿈을 이루어드립니다.
시험 번호/코드: ST0-090
시험 이름: Symantec (Symantec control compliance suite 10.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 156 문항
업데이트: 2014-04-22
ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다. 거의 100%의 정확도를 자랑하고 있습니다. 아마 많은 유사한 사이트들도 많습니다. 이러한 사이트에서 학습가이드와 온라인서비스도 지원되고 있습니다만 ITExamDump 는 이미 이러한 사이트를 뛰어넘은 실력으로 업계에서 우리만의 이미지를 지키고 있습니다. ITExamDump 는 정확한 문제와 답만 제공하고 또한 그 어느 사이트보다도 빠른 업데이트로 여러분의 인증시험을 안전하게 패스하도록 합니다.
Symantec인증ST0-090시험준비를 하고 계시다면ITExamDump에서 출시한Symantec인증ST0-090덤프를 제일 먼저 추천해드리고 싶습니다. ITExamDump제품은 여러분들이 제일 간편한 방법으로 시험에서 고득점을 받을수 있도록 도와드리는 시험동반자입니다. Symantec인증ST0-090시험패는ITExamDump제품으로 고고고!
ST0-090 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-090.html
NO.1 An administrator wants to ensure that issues flagged as out of compliance are addressed as efficiently
as possible. The administrator wants to trigger the remediation process. Where is the remediation option
set?
A. within the Evaluation Job Wizard
B. within the Standard specification
C. on the Asset Properties page
D. on the Reporting page
Answer: A
Symantec ST0-090자료 ST0-090자격증
NO.2 A Control Compliance Suite 10.0 user schedules a Policy Acceptance report. After the Report job
finishes, the user opens the results and receives the message: 'No data available to generate this report.'
The user is sure that certain people have already accepted policies this morning. What should the user do
in order to get the data in the report?
A. run the Report Generation job again
B. run the Policy and Mandates Metrics Computation job
C. run the Report Data Purge job
D. run the Report Data Synchronization job
Answer: D
Symantec ST0-090시험문제 ST0-090 ST0-090 ST0-090 dumps ST0-090
NO.3 When an administrator of Control Compliance Suite 10.0 views the results of an evaluation against a
standard, both the risk score and the compliance score are high. How can these evaluation results be
explained?
A. Multiple sections contain failures.
B. The risk score tracks critical failures.
C. Many exceptions have been approved.
D. The compliance score tracks informational items.
Answer: C
Symantec ST0-090 ST0-090 dump
NO.4 A Standards Evaluation has completed and is ready to be viewed. What are two view options.? (Select
two.)
A. Risk-based view
B. Compliance-based view
C. Asset-based view
D. Failure-based view
E. Standard-based view
Answer: C, E
Symantec자격증 ST0-090인증 ST0-090 ST0-090
NO.5 In terms of securing systems and configurations, Control Compliance Suite 10.0 performs which two
functions? (Select two.)
A. performs event correlation on security logs
B. identifies high risk systems and configurations
C. scans content of servers for confidential information
D. provides guidance for and measures effectiveness against industry standards
E. proactively blocks threats from penetrating critical systems
Answer: B, D
Symantec ST0-090최신덤프 ST0-090최신덤프
NO.6 A single Data Processing Service (DPS) Reporter is assigned to perform database synchronization
between which two databases? (Select two.)
A. Reporting database
B. Evidence database
C. Credentials database
D. Production database
E. Master database
Answer: A, D
Symantec ST0-090자료 ST0-090 pdf ST0-090
NO.7 A Data Collection job fails for a Windows machine in Control Compliance Suite 10.0 (CCS). All
components appear to have been correctly installed and configured in the console. What is an initial step
to take outside of the CCS Console (Reporting and Analytics) to troubleshoot the issue?
A. restart Symantec RMS Process Manager
B. run a bv-Control for Windows query
C. recreate the Credentials database
D. verify the Enterprise Configuration Service
Answer: B
Symantec ST0-090 ST0-090최신덤프 ST0-090
NO.8 Asset Import jobs from a particular site are running more slowly than Asset Import jobs from other sites.
What is the most likely cause?
A. The Application server service is untrusted for delegation.
B. One of the DPS Collectors from the site has failed.
C. The Reporting Database Synchronization job has failed.
D. Service Principal Names (SPNs) are configured incorrectly.
Answer: B
Symantec ST0-090 ST0-090
NO.9 Which database do the dashboards pull data from?
A. Production database
B. Reporting database
C. Evidence database
D. Master database
Answer: B
Symantec dumps ST0-090기출문제 ST0-090자료 ST0-090자격증 ST0-090
NO.10 What must be done before the Control Compliance Suite 10.0 can use a newly installed Data
Processing Service (DPS)?
A. synchronize settings on all registered DPS hosts
B. register the DPS with the Application server
C. set all values of the common fields with reconciliation rules
D. import primary assets
Answer: B
Symantec pdf ST0-090 ST0-090 dumps
NO.11 What is required for the Control Compliance Suite 10.0 Application server and Directory server
components to support Kerberos authentication in an Active Directory environment?
A. username and password
B. configured PKI certificates
C. configured Service Principal Names (SPNs)
D. successful sync configuration
Answer: C
Symantec시험문제 ST0-090 ST0-090 ST0-090
NO.12 An administrator troubleshooting the Symantec Control Compliance system notices that both the
Application server and the Directory server failed to start. The administrator verifies that Windows started
normally on the two servers. What is the next step the administrator should take?
A. verify that the Active Directory server is running
B. ping the load balancer from the Application server
C. verify that the Information server is running
D. verify internet access from the Directory server
Answer: D
Symantec ST0-090덤프 ST0-090 ST0-090 ST0-090 dumps
NO.13 Which two statements accurately describe the purpose of the Control Compliance Suite Production
database? (Select two.)
A. It stores the data that is collected from the assets.
B. It stores data specific to individual dashboards.
C. It stores the results of evaluation jobs.
D. It stores data specific to individual reports.
E. It stores evidence gathered from the extended evidence sources.
Answer: A, C
Symantec자료 ST0-090기출문제 ST0-090최신덤프 ST0-090 ST0-090
NO.14 What are two available formats for exporting reports from the Control Compliance Suite 10.0 Reporting
and Analytics Console? (Select two.)
A. Comma Separated Values (CSV)
B. Portable Document Format (PDF)
C. Crystal Reports (RPT)
D. Microsoft PowerPoint (PPT)
E. Microsoft Access (MDB)
Answer: B, C
Symantec인증 ST0-090기출문제 ST0-090
NO.15 Which Control Compliance Suite component automates the analysis of procedural controls?
A. Standards Module
B. Entitlements Module
C. Policy Module
D. Response Assessment Module
Answer: D
Symantec ST0-090 ST0-090 dumps ST0-090 ST0-090인증
NO.16 The Response Assessment Module Web Service application pool account must be a member of which
group?
A. Administrators
B. IIS_WPG
C. RAM_Administrators
D. Distributed COM Users
Answer: B
Symantec자격증 ST0-090 ST0-090 ST0-090 ST0-090시험문제
NO.17 Within an evaluation result, the status 'Unknown' is primarily defined with which check setting?
A. missing data items
B. heck ex ression
C. precondition
D. post-processing expression
Answer: A
Symantec pdf ST0-090 ST0-090 ST0-090 ST0-090
NO.18 Which two actions can be taken on a predefined report in the Control Compliance Suite 10.0 Console?
(Select two.)
A. Move
B. Delete
C. Copy
D. Export Report Template
E. Paste
Answer: C, D
Symantec자료 ST0-090시험문제 ST0-090덤프 ST0-090최신덤프
NO.19 In order to use Response Assessment Module results as policy evidence in Control Compliance Suite
(CCS), which two statements are correct? (Select two.)
A. The policy and question must be mapped to the same control statement.
B. The same CCS asset must be part of the policy and the questionnaire.
C. The questionnaire and policy evaluation must be performed simultaneously.
D. The Content Studio must be mapped to the RAM server.
E. The user must be assigned the data owner role to validate the result.
Answer: A, B
Symantec dump ST0-090 dumps ST0-090 ST0-090 ST0-090인증
NO.20 Which function of Control Compliance Suite 10.0 is responsible for generating tiered dashboards?
A. DPS Evaluator
B. DPS Reporter
C. Application server
D. Directory server
Answer: B
Symantec ST0-090 ST0-090 ST0-090기출문제
ITexamdump의 000-283덤프의 VCE테스트프로그램과 C_A1FIN_10덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-N55시험에 대비한 고품질 덤프와 C_HANATEC131시험 최신버전덤프를 제공해드립니다. 최고품질 1z0-474시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기