ITExamDump의 완벽한 Citrix인증 1Y0-A23덤프는 고객님이Citrix인증 1Y0-A23시험을 패스하는 지름길입니다. 시간과 돈을 적게 들이는 반면 효과는 십점만점에 십점입니다. ITExamDump의 Citrix인증 1Y0-A23덤프를 선택하시면 고객님께서 원하시는 시험점수를 받아 자격증을 쉽게 취득할수 있습니다.
Citrix인증1Y0-350시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Citrix인증1Y0-350시험패스로 꿈을 이루어주는 사이트입니다. 우리는Citrix인증1Y0-350시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Citrix인증1Y0-350시험을 응시할 수 있는 자료입니다.
ITExamDump는 여러분이 원하는 최신 최고버전의 Citrix 인증1Y0-A23덤프를 제공합니다. Citrix 인증1Y0-A23덤프는 IT업계전문가들이 끊임없는 노력과 지금까지의 경험으로 연구하여 만들어낸 제일 정확한 시험문제와 답들로 만들어졌습니다. ITExamDump의 문제집으로 여러분은 충분히 안전이 시험을 패스하실 수 있습니다. 우리 ITExamDump 의 문제집들은 모두 100%합격율을 자랑하며 ITExamDump의 제품을 구매하였다면 Citrix 인증1Y0-A23시험패스와 자격증 취득은 근심하지 않으셔도 됩니다. 여러분은 IT업계에서 또 한층 업그레이드 될것입니다.
시험 이름: XenApp 5 for Windows Server 2003: Administration
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-A23시험
100% 합격율 보장
Q&A: 88 문항 1Y0-A23자격증시험
업데이트: 2014-06-16
1Y0-A23시험: >>펼쳐보기
시험 이름: Citrix NetScaler 10 Essentials and Networking
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Y0-350시험정보
100% 합격율 보장
Q&A: 126 문항 1Y0-350 pdf
업데이트: 2014-06-16
1Y0-350시험정보: >>펼쳐보기
Citrix인증 1Y0-A23시험을 패스하여 자격증을 취득하시면 찬란한 미래가 찾아올것입니다. Citrix인증 1Y0-A23인증시험을 패스하여 취득한 자격증은 IT인사로서의 능력을 증명해주며 IT업계에 종사하는 일원으로서의 자존심입니다. ITExamDump 의 Citrix인증 1Y0-A23덤프는 시험패스에 초점을 맞추어 제일 간단한 방법으로 시험을 패스하도록 밀어주는 시험공부가이드입니다.구매전Citrix인증 1Y0-A23무료샘플을 다운받아 적성에 맞는지 확인하고 구매할지 않할지 선택하시면 됩니다.
많은 사이트에서 Citrix인증 1Y0-350시험대비덤프를 제공해드리는데ITExamDump를 최강 추천합니다. ITExamDump의Citrix인증 1Y0-350덤프에는 실제시험문제의 기출문제와 예상문제가 수록되어있어 그 품질 하나 끝내줍니다.적중율 좋고 가격저렴한 고품질 덤프는ITExamDump에 있습니다.
1Y0-350 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Y0-350.html
NO.1 Scenario: A network engineer created an IPv6 virtual server on the NetScaler. The virtual
server is using a service group with two IPv4 servers bound to it. When testing access to the virtual
server from a client configured with an IPv6 address, he is unable to connect.
What could be the reason for this issue?
A. The NetScaler is disabled for NAT.
B. IPv6 protocol translation is disabled.
C. An IPv6 address on the NetScaler is not bound to the correct VLAN.
D. The NetScaler does not have an INAT rule to convert IPv4 to IPv6 from the back-end servers.
Answer: B
Citrix PDF 1Y0-350자격증 1Y0-350자료 1Y0-350시험문제 1Y0-350 1Y0-350교육
NO.2 Scenario: The NetScaler is connected to two subnets. The NSIP is 10.2.9.12. The external SNIP
is 10.2.7.3. The MIP for internal access is 10.2.9.3. Web servers, authentication servers and time
servers are on the 10.2.10.0/ 24 network which is available through the
10.2.9.1 router. The external firewall has the 10.2.7.1 address. Traffic bound for Internet clients
should flow through the external firewall.
Which command should be used to set the default route?
A. add route 0.0.0.0 0.0.0.0 10.2.7.1
B. add route 0.0.0.0 0.0.0.0 10.2.9.1
C. add route 10.0.0.0 255.0.0.0 10.2.9.1
D. add route 10.0.0.0 255.0.0.0 10.2.7.1
Answer: A
Citrix시험문제 1Y0-350 IT국제자격증 1Y0-350
NO.3 Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting the services are on an IPv4 network. The engineer has
already enabled IPv6 on the NetScaler.
What does the engineer need to do in order to provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C
Citrix덤프 1Y0-350덤프다운 1Y0-350자격시험 1Y0-350자료 1Y0-350덤프 1Y0-350덤프자료
NO.4 Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces; however, the engineer has been told that the NetScaler must now only use a single
interface for this network. The engineer removes the channel and immediately notices a decrease in
network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B
Citrix 1Y0-350교육 1Y0-350 Dump 1Y0-350 IT자격증시험 1Y0-350최신덤프
NO.5 Scenario: For security reasons, the NSIP needs to be configured to only be accessible on
interface 0/1, which is VLAN 300.
The NSIP address is 10.110.4.254 and the subnet mask is 255.255.255.0.
How would the network engineer achieve this configuration?
A. set ns config -nsvlan 300 -ifnum 0/1
B. set ns ip 10.110.4.254 -gui ENABLED -vrID 300
C. add vlan 300 set ns ip 10.110.4.254 -mgmtAccess ENABLED
D. set ns config -IPAddress 10.110.4.254 -netmask 255.255.255.0
Answer: A
Citrix시험문제 1Y0-350 1Y0-350기출문제 1Y0-350시험정보
NO.6 Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B
Citrix시험문제 1Y0-350최신버전덤프 1Y0-350시험 1Y0-350 dumps
NO.7 A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A
Citrix강좌 1Y0-350응시료 1Y0-350 1Y0-350 IT덤프
NO.8 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize the number of ARP requests.
Which feature should the network engineer enable to minimize ARP requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D
Citrix자격증덤프 1Y0-350 1Y0-350 1Y0-350
댓글 없음:
댓글 쓰기