ITExamDump에서는 가장 최신이자 최고인Juniper인증 JN0-331시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Juniper인증 JN0-331덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Juniper인증 JN0-331시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.
ITExamDump 의 Juniper인증 JN0-331덤프는Juniper인증 JN0-331시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Juniper인증 JN0-331시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Juniper인증 JN0-331시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.
시험 번호/코드: JN0-331
시험 이름: Juniper (SEC,Specialist(JNCIS-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 131 문항
업데이트: 2014-04-14
ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Juniper 인증JN0-331 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. Juniper 인증JN0-331 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.
ITExamDump의Juniper인증 JN0-331시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Juniper인증 JN0-331시험대비덤프를 제공해드립니다.
JN0-331 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-331.html
NO.1 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC
Juniper기출문제 JN0-331 JN0-331기출문제
NO.2 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D
Juniper JN0-331인증 JN0-331기출문제
NO.3 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B
Juniper JN0-331 dumps JN0-331최신덤프 JN0-331
NO.4 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D
Juniper JN0-331시험문제 JN0-331시험문제 JN0-331
NO.5 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D
Juniper기출문제 JN0-331 JN0-331 JN0-331자료
NO.6 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE
Juniper dump JN0-331 JN0-331
NO.7 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D
Juniper JN0-331 JN0-331
NO.8 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD
Juniper자료 JN0-331 JN0-331 JN0-331 pdf
NO.9 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC
Juniper JN0-331기출문제 JN0-331 pdf
NO.10 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D
Juniper자격증 JN0-331 JN0-331 JN0-331 JN0-331
NO.11 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C
Juniper JN0-331 dumps JN0-331 dumps JN0-331자료 JN0-331
NO.12 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC
Juniper최신덤프 JN0-331최신덤프 JN0-331자격증
NO.13 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C
Juniper JN0-331 JN0-331인증 JN0-331 JN0-331최신덤프 JN0-331
NO.14 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C
Juniper기출문제 JN0-331덤프 JN0-331 pdf JN0-331최신덤프 JN0-331최신덤프 JN0-331자격증
NO.15 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A
Juniper dump JN0-331시험문제 JN0-331 JN0-331 pdf
NO.16 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD
Juniper dump JN0-331덤프 JN0-331
NO.17 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC
Juniper JN0-331 dump JN0-331시험문제
NO.18 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD
Juniper최신덤프 JN0-331 pdf JN0-331 JN0-331 JN0-331 JN0-331
NO.19 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE
Juniper JN0-331 JN0-331시험문제 JN0-331자격증 JN0-331시험문제
NO.20 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD
Juniper JN0-331 JN0-331 JN0-331
ITexamdump의 덤프의 VCE테스트프로그램과 C_TADM51_70덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-331시험에 대비한 고품질 덤프와 70-497시험 최신버전덤프를 제공해드립니다. 최고품질 JK0-U11시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기