ITExamDump덤프의 IT인증시험 적중율은 아주 높습니다: Juniper

레이블이 Juniper인 게시물을 표시합니다. 모든 게시물 표시

2014년 5월 15일 목요일

JN0-130덤프, JN0-531기출문제

우리ITExamDump의 덤프는 여러분이Juniper JN0-130인증시험응시에 도움이 되시라고 제공되는 것입니다, 우라ITExamDump에서 제공되는 학습가이드에는Juniper JN0-130인증시험관연 정보기술로 여러분이 이 분야의 지식 장악에 많은 도움이 될 것이며 또한 아주 정확한Juniper JN0-130시험문제와 답으로 여러분은 한번에 안전하게 시험을 패스하실 수 있습니다,Juniper JN0-130인증시험을 아주 높은 점수로 패스할 것을 보장해 드립니다,

자신을 부단히 업그레이드하려면 많은 노력이 필요합니다. IT업종 종사자라면 국제승인 IT인증자격증을 취득하는것이 자신을 업그레이드하는것과 같습니다. Juniper인증 JN0-531시험을 패스하여 원하는 자격증을 취득하려면ITExamDump의Juniper인증 JN0-531덤프를 추천해드립니다. 하루빨리 덤프를 공부하여 자격증 부자가 되세요.

Juniper인증 JN0-531시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Juniper인증 JN0-531시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Juniper인증 JN0-531덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Juniper인증 JN0-531덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

시험 번호/코드: JN0-130
시험 이름: Juniper networks Certified internet specialist.e(jncis-e)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-130인증
100% 합격율 보장
Q&A: 128 문항 JN0-130인증덤프
업데이트: 2014-05-14

JN0-130인증: >>펼쳐보기

시험 번호/코드: JN0-531
시험 이름: FWV, Specailist(JNCIS-FWV)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-531자격증시험자료
100% 합격율 보장
Q&A: 145 문항 JN0-531교재
업데이트: 2014-05-14

JN0-531자격증시험자료: >>펼쳐보기

JN0-531인증시험패스는 쉬운 일은 아닙니다. 높은 전문지식은 필수입니다.하지만 자신은 이 방면 지식이 없다면 ITExamDump가 도움을 드릴 수 있습니다. ITExamDump의 전문가들이 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어 여러분들의 고민을 해결해드릴 수 있습니다. 우리는 최고의JN0-531인증시험문제와 답을 제공합니다. ITExamDump는 최선을 다하여 여러분이 한번에JN0-531인증시험을 패스하도록 도와드릴 것입니다. 여러분은 우리 ITExamDump 선택함으로 일석이조의 이익을 누릴 수 있습니다. 첫쨰는 관여지식은 아주 알차게 공부하실 수 있습니다.둘째는 바로 시험을 안전하게 한번에 통과하실 수 있다는 거죠.그리고 우리는 일년무료 업데이트서비스를 제공합니다.덤프가 업뎃이되면 우리는 모두 무료로 보내드립니다.만약 시험에서 실패한다면 우리 또한 덤프비용전액을 환불해 드립니다.

ITExamDump는Juniper JN0-130인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의Juniper JN0-130자료를 만들었습니다. 이 자료로 여러분은 100%Juniper의JN0-130인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중Juniper JN0-130인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.

우리ITExamDump 에서는 여러분들한테 아주 편리하고 시간 절약함과 바꿀 수 있는 좋은 대책을 마련하였습니다. ITExamDump에서는Juniper JN0-531인증시험관련가이드로 효과적으로Juniper JN0-531시험을 패스하도록 도와드리겠습니다.만약 여러분이 다른 사이트에서도 관련덤프자료를 보셨을 경우 페이지 아래를 보시면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일것입니다.

JN0-130 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-130.html

NO.1 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper시험문제   JN0-130   JN0-130   JN0-130

NO.2 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper IT덤프   JN0-130   JN0-130시험정보   JN0-130 IT자격증시험

NO.3 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper교육   JN0-130자격시험   JN0-130자격시험   JN0-130   JN0-130 IT자격증시험

NO.4 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper최신덤프   JN0-130덤프   JN0-130   JN0-130자격시험   JN0-130 IT자격증시험   JN0-130
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130자격증   JN0-130덤프자료   JN0-130 PDF
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper덤프자료   JN0-130교육   JN0-130시험후기   JN0-130덤프   JN0-130교육
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper기출문제   JN0-130덤프다운   JN0-130인증덤프   JN0-130국제공인자격증   JN0-130자료   JN0-130 Dump
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper덤프   JN0-130 IT자격증시험자료   JN0-130기출문제   JN0-130자격증   JN0-130 IT자격증시험   JN0-130자격증시험
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper교재   JN0-130자격시험   JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130   JN0-130 IT자격증시험   JN0-130시험문제
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper덤프다운   JN0-130시험일정   JN0-130 pdf   JN0-130자료
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper덤프다운   JN0-130인증덤프   JN0-130시험문제   JN0-130교재   JN0-130
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper자격증신청   JN0-130덤프   JN0-130덤프   JN0-130국제공인자격증
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper교재   JN0-130시험문제   JN0-130   JN0-130 dump
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper자격증   JN0-130교육   JN0-130덤프다운
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper최신덤프   JN0-130 Dump   JN0-130   JN0-130자격시험   JN0-130   JN0-130 Dumps
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper IT자격증   JN0-130인증덤프   JN0-130덤프   JN0-130   JN0-130 IT시험덤프
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper최신덤프   JN0-130최신덤프   JN0-130덤프   JN0-130덤프다운   JN0-130 IT국제자격증
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper   JN0-130   JN0-130기출문제   JN0-130 IT국제자격증   JN0-130기출문제

NO.5 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper시험   JN0-130 IT국제자격증   JN0-130

NO.6 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper자격증덤프   JN0-130 dump   JN0-130강좌

NO.7 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper시험일정   JN0-130자격시험   JN0-130   JN0-130강좌   JN0-130 IT자격증

NO.8 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper Dump   JN0-130 PDF   JN0-130인증덤프   JN0-130교육   JN0-130 IT국제자격증   JN0-130덤프

JN0-532국제자격증, JN0-370시험일정

ITExamDump의 경험이 풍부한 전문가들이Juniper JN0-532인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.Juniper JN0-532인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전Juniper JN0-532인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.

ITExamDump의Juniper인증 JN0-370 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. Juniper인증 JN0-370덤프로Juniper인증 JN0-370시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. Juniper인증 JN0-370덤프는 실제Juniper인증 JN0-370시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.

Juniper JN0-532인증시험패스는 아주 어렵습니다. 자기에맞는 현명한 학습자료선택은 성공을 내딛는 첫발입니다. 퍼펙트한 자료만의 시험에 성공할수 있습니다. Pass4Tes시험문제와 답이야 말로 퍼펙트한 자료이죠. 우리Juniper JN0-532인증시험자료는 100%보장을 드립니다. 또한 구매 후 일년무료 업데이트버전을 받을 수 있는 기회를 얻을 수 있습니다.

시험 번호/코드: JN0-532
시험 이름: FWV,Specialist (JNCIS -FWV)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-532시험자료
100% 합격율 보장
Q&A: 146 문항 JN0-532자격증
업데이트: 2014-05-14

JN0-532시험자료: >>펼쳐보기

시험 번호/코드: JN0-370
시험 이름: QFabric, Specialist (JNCIS-QF)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-370교재
100% 합격율 보장
Q&A: 108 문항 JN0-370시험
업데이트: 2014-05-14

JN0-370교재: >>펼쳐보기

Juniper 인증 JN0-532시험에 도전해보려고 결정하셨다면 ITExamDump덤프공부가이드를추천해드립니다. ITExamDump덤프는 고객님께서 필요한것이 무엇인지 너무나도 잘 알고 있답니다. ITExamDump의 Juniper 인증 JN0-532덤프는Juniper 인증 JN0-532시험을 쉽게 만듭니다.

Juniper인증 JN0-370시험패스 공부방법을 찾고 있다면 제일 먼저ITExamDump를 추천해드리고 싶습니다. Juniper인증 JN0-370시험이 많이 어렵다는것은 모두 알고 있는 것입니다. ITExamDump에서 출시한 Juniper인증 JN0-370덤프는 실제시험을 대비하여 연구제작된 멋진 작품으로서 Juniper인증 JN0-370시험적중율이 최고입니다. Juniper인증 JN0-370시험패스를 원하신다면ITExamDump의 제품이 고객님의 소원을 들어줄것입니다.

ITExamDump 에서 출시한 제품 Juniper인증JN0-532시험덤프는 고득점으로 시험을 통과한 많은 분들이 검증한 완벽한 시험공부자료입니다. IT업계에 몇십년간 종사한 전문가들의 경험과 노하우로 제작된Juniper인증JN0-532덤프는 실제 시험문제에 대비하여 시험유형과 똑같은 유형의 문제가 포함되어있습니다.시험 불합격시 불합격성적표로 덤프비용환불신청을 약속드리기에 아무런 우려없이 덤프를 구매하여 공부하시면 됩니다.

우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과Juniper JN0-532인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여Juniper JN0-532관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.

JN0-696시험정보, JN0-533자격증시험

ITExamDump전문가들은Juniper JN0-696인증시험만을 위한 특별학습가이드를 만들었습니다.Juniper JN0-696인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게Juniper JN0-696인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

ITExamDump는ITExamDump의Juniper인증 JN0-533덤프자료를 공부하면 한방에 시험패스하는것을 굳게 약속드립니다. ITExamDump의Juniper인증 JN0-533덤프로 공부하여 시험불합격받으면 바로 덤프비용전액 환불처리해드리는 서비스를 제공해드리기에 아무런 무담없는 시험준비공부를 할수 있습니다.

IT업계에 종사하시는 분들은 IT인증시험을 통한 자격증취득의 중요성을 알고 계실것입니다. ITExamDump에서 제공해드리는 인증시험대비 고품질 덤프자료는 제일 착한 가격으로 여러분께 다가갑니다. ITExamDump덤프는 IT인증시험에 대비하여 제작된것으로서 높은 적중율을 자랑하고 있습니다.덤프를 구입하시면 일년무료 업데이트서비스, 시험불합격시 덤프비용환불 등 퍼펙트한 서비스도 받을수 있습니다.

시험 번호/코드: JN0-696
시험 이름: Security Support, Professional (JNCSP-SEC)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-696최신버전덤프
100% 합격율 보장
Q&A: 36 문항 JN0-696응시료
업데이트: 2014-05-14

JN0-696최신버전덤프: >>펼쳐보기

시험 번호/코드: JN0-533
시험 이름: FWV, Specialist (JNCIS-FWV)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 JN0-533시험문제
100% 합격율 보장
Q&A: 110 문항 JN0-533자격증자료
업데이트: 2014-05-14

JN0-533시험문제: >>펼쳐보기

ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Juniper인증 JN0-696덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Juniper인증 JN0-696덤프는Juniper인증 JN0-696최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.

ITExamDump에서 최고최신버전의Juniper인증JN0-696시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에Juniper인증JN0-696시험을 패스하실 수 있습니다.Juniper인증JN0-696관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. Juniper인증 JN0-533시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 Juniper인증 JN0-533덤프로Juniper인증 JN0-533시험을 준비해보세요. 시험패스가 한결 편해집니다.

ITExamDump의 Juniper인증 JN0-533덤프를 공부하여Juniper인증 JN0-533시험을 패스하는건 아주 간단한 일입니다.저희 사이트에서 제작한Juniper인증 JN0-533덤프공부가이드는 실제시험의 모든 유형과 범위가 커버되어있어 높은 적중율을 자랑합니다.시험에서 불합격시 덤프비용은 환불신청 가능하기에 안심하고 시험준비하시면 됩니다.

JN0-696 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-696.html

NO.1 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D

Juniper시험문제   JN0-696국제공인자격증   JN0-696   JN0-696최신덤프

NO.2 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B

Juniper교육   JN0-696기출문제   JN0-696   JN0-696최신덤프   JN0-696후기   JN0-696

NO.3 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C

Juniper   JN0-696자료   JN0-696   JN0-696 IT자격증시험자료   JN0-696인증덤프

NO.4 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C

Juniper자료   JN0-696자격증   JN0-696시험

NO.5 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A

Juniper   JN0-696   JN0-696인증덤프   JN0-696자격증

NO.6 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D

Juniper국제공인자격증   JN0-696   JN0-696기출문제   JN0-696교육   JN0-696   JN0-696 IT시험덤프

2014년 4월 15일 화요일

Juniper JN0-330 인증 덤프

ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Juniper JN0-330인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Juniper JN0-330관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Juniper JN0-330자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Juniper JN0-330인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.

ITExamDump에는 전문적인 업계인사들이Juniper JN0-330시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.Juniper JN0-330자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.

만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는Juniper JN0-330관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게Juniper JN0-330시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

ITExamDump를 선택함으로, ITExamDump는 여러분Juniper인증JN0-330시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.

시험 번호/코드: JN0-330
시험 이름: Juniper (JN0-330-Enhanced Services, Specialist(JNCIS-ES))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 150 문항
업데이트: 2014-04-14

JN0-330 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-330.html

NO.1 Which command allows you to view the router's current priority for VRRP group 100 on interface
ge-0/0/1.0?
A. show vrrp
B. show vrrp group 100
C. show interfaces ge-0/0/1.0 vrrp group 100
D. show interfaces vrrp ge-0/0/1.0 group 100
Answer:A

Juniper   JN0-330기출문제   JN0-330 dumps   JN0-330   JN0-330기출문제

NO.2 Click the Exhibit button.
Which type of source NAT is configured in the exhibit?
A. static source pool
B. interface source pool
C. source pool with PAT
D. souce pool without PAT
Answer:A

Juniper   JN0-330최신덤프   JN0-330   JN0-330

NO.3 Click the Exhibit button.
Based on the configuration shown in the exhibit, what will happen to the traffic matching the security
policy?
A. The traffic is permitted through the myTunnel IPSec tunnel only on Tuesdays.
B. The traffic is permitted through the myTunnel IPSec tunnel daily, with the exception of Mondays.
C. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
7:00 am and 6:00 pm, and Thursdays between 7:00 am and 6:00 pm.
D. The traffic is permitted through the myTunnel IPSec tunnel all day on Mondays, Wednesdays between
6:01 pm and 6:59 am, and Thursdays between 6:01 pm and 6:59 am.
Answer: C

Juniper dumps   JN0-330자료   JN0-330   JN0-330

NO.4 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections. How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper덤프   JN0-330 pdf   JN0-330자격증   JN0-330 pdf   JN0-330

NO.5 You are not able to telnet to the interface IP of your JUNOS software with enhanced services device
from a PC on the same subnet. What is causing the problem?
A. Telnet is not being permitted by self policy.
B. Telnet is not being permitted by security policy.
C. Telnet is not allowed because it is not considered secure.
D. Telnet is not enabled as a host-inbound service on the zone.
Answer: D

Juniper dumps   JN0-330   JN0-330

NO.6 Which two are components of the enhanced services software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-330시험문제   JN0-330   JN0-330 dumps   JN0-330   JN0-330

NO.7 Click the Exhibit button.
In the exhibit, what is the priority for Router B in VRRP group 100?
A. 1
B. 100
C. 110
D. 255
Answer: B

Juniper   JN0-330 dump   JN0-330   JN0-330인증

NO.8 Which two are components of the JUNOS software's routing policy? (Choose two.)
A. route-map
B. prefix-list
C. distribute-list
D. policy-statement
Answer: BD

Juniper최신덤프   JN0-330   JN0-330덤프   JN0-330

NO.9 Which three parameters are configured in the IKE policy? (Choose three.)
A. mode
B. preshared key
C. external interface
D. security proposals
E. dead peer detection settings
Answer: ABD

Juniper   JN0-330덤프   JN0-330   JN0-330최신덤프   JN0-330기출문제

NO.10 Which three security concerns can be addressed by a tunnel mode IPSec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer:ACE

Juniper dumps   JN0-330최신덤프   JN0-330   JN0-330

NO.11 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. network address translation
Answer: B

Juniper최신덤프   JN0-330시험문제   JN0-330 pdf   JN0-330기출문제

NO.12 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the router itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper   JN0-330   JN0-330

NO.13 Which two statements regarding asymmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: BC

Juniper   JN0-330자료   JN0-330자료   JN0-330

NO.14 Click the Exhibit button.
In the exhibit, what is the purpose of this OSPF configuration?
A. The router sends the file debugOSPF (containing hellos sent and LSA updates) to the syslog server.
B. The router traces both OSPF hellos sent and LSA updates, and stores the results in the debugOSPF
file.
C. The router traces both OSPF hellos sent and LSA updates, and sends the results to the syslog process
with the debugOSPF facility.
D. The router traces all OSPF operations, stores the results in the debugOSPF file, and marks both hellos
sent and LSAupdates in the file with a special flag.
Answer: B

Juniper dump   JN0-330 dump   JN0-330

NO.15 Using a policy with the policy-rematch flag enabled, what happens to the existing and new sessions
when you change the policy action from permit to deny?
A. The new sessions matching the policy are denied. The existing sessions are dropped.
B. The new sessions matching the policy are denied. The existing sessions, not being allowed to carry
any traffic, simply timeout.
C. The new sessions matching the policy might be allowed through if they match another policy. The
existing sessions are dropped.
D. The new sessions matching the policy are denied. The existing sessions continue until they are
completed or their timeout is reached.
Answer:A

Juniper pdf   JN0-330 pdf   JN0-330최신덤프   JN0-330최신덤프

NO.16 You must configure a SCREEN option that would protect your router from a session table flood.
Which configuration meets this requirement?
A. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
icmp {
ip-sweep threshold 5000;
flood threshold 2000;
}
B. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
tcp {
syn-flood {
attack-threshold 2000;
destination-threshold 2000;
}
C. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
udp {
flood threshold 5000;
}
D. [edit security screen]
user@hostl# show
ids-option protectFromFlood {
limit-session {
source-ip-based 1200;
destination-ip-based 1200;
}
Answer: D

Juniper자료   JN0-330자료   JN0-330 dumps   JN0-330   JN0-330

NO.17 Which statement is true about interface-based static NAT?
A. It also supports PAT.
B. It requires you to configure address entries in the junos-nat zone.
C. It requires you to configure address entries in the junos-global zone.
D. The IP addresses being translated must be in the same subnet as the incoming interface.
Answer: D

Juniper   JN0-330   JN0-330자격증

NO.18 On which three traffic types does firewall pass-through authentication work? (Choose three.)
A. ping
B. FTP
C. Telnet
D. HTTP
E. HTTPS
Answer: BCD

Juniper   JN0-330   JN0-330 dump   JN0-330

NO.19 Click the Exhibit button.
host_a is in subnet_a and host_b is in subnet_b.
Given the configuration shown in the exhibit, which statement is true about traffic from host_a to host_b?
A. DNS traffic is denied.
B. Telnet traffic is denied.
C. SMTP traffic is denied.
D. Ping traffic is permitted.
Answer: B

Juniper   JN0-330기출문제   JN0-330기출문제   JN0-330

NO.20 Interface ge-0/0/2.0 of your router is attached to the Internet and is configured with an IP address and
network mask
of 71.33.252.17/24. A host with IP address 10.20.20.1 is running an HTTP service on TCP port 8080. This
host isattached to the ge-0/0/0.0 interface of your router. You must use interface-based static NAT to
make the HTTP service on the host reachable from the Internet.
On which IP address and TCP port can Internet hosts reach the HTTP service?
A. IP address 10.10.10.1 and TCP port 8080
B. IP address 71.33.252.17 and TCP port 80
C. IP address 71.33.251.19 and TCP port 80
D. IP address 71.33.252.19 and TCP port 8080
Answer: D

Juniper dumps   JN0-330   JN0-330   JN0-330 pdf

NO.21 In a JSRP cluster with two J6350 routers, the interface ge-7/0/0 belongs to which device?
A. This interface is a system-created interface.
B. This interface belongs to NODE0 of the cluster.
C. This interface belongs to NODE1 of the cluster.
D. This interface will not exist because J6350 routers have only six slots.
Answer: C

Juniper   JN0-330   JN0-330 pdf   JN0-330자격증   JN0-330시험문제

NO.22 In JUNOS software with enhanced services, which three packet elements are inspected to determine
if a session
already exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer:ACE

Juniper덤프   JN0-330   JN0-330   JN0-330   JN0-330

NO.23 You want to create a policy allowing traffic from any host in the Trust zone to hostb.example.com
(172.19.1.1) in the
Untrust zone. How do you do create this policy?
A. Specify the IP address (172.19.1.1/32) as the destination address in the policy.
B. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.
C. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in
the policy.
D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry
in the policy.
Answer: D

Juniper   JN0-330   JN0-330   JN0-330

NO.24 Click the Exhibit button.
In the exhibit, which statement is correct?
A. Three physical interfaces are redundant.
B. You must define an additional Redundancy Group.
C. node 0 will immediately become primary in the cluster.
D. You must issue an operational command and reboot the system for the above configuration to take
effect.
Answer: D

Juniper pdf   JN0-330 dumps   JN0-330   JN0-330인증   JN0-330

NO.25 Which two are characteristics of link-state routing protocols? (Choose two.)
A. Routers choose a best path for a destination based on the SPF algorithm.
B. All routers in a given area or level build a consistent database describing the network's topology.
C. Routers choose the best path for a destination based on the interface on which they received the link
stateadvertisement with the lowest cost.
D. All routers in a given area or level forward link state advertisements between interfaces in the same
area or level,
adding their metric to the link state advertisement's cost information when they forward it.
Answer:AB

Juniper dump   JN0-330   JN0-330   JN0-330시험문제   JN0-330

NO.26 Which parameters must you select when configuring operating system probes SCREEN options?
A. syn-fin, syn-flood, and tcp-no-frag
B. syn-fin, port-scan, and tcp-no-flag
C. syn-fin, fin-no-ack, and tcp-no-frag
D. syn-fin, syn-ack-ack-proxy, and tcp-no-frag
Answer: C

Juniper시험문제   JN0-330   JN0-330자격증   JN0-330최신덤프

NO.27 You want to enable SSH and Telnet access to the router's CLI. Under which configuration hierarchy
would you enable these protocols?
A. [edit system cli]
B. [edit security cli]
C. [edit system services]
D. [edit security services]
Answer: C

Juniper인증   JN0-330인증   JN0-330   JN0-330   JN0-330자료   JN0-330덤프

NO.28 A route-based VPN is required for which scenario?
A. when the remote VPN peer is behind a NAT device
B. when multiple networks need to be reached across the tunnel
C. when the remote VPN peer is a dialup or remote access client
D. when a dynamic routing protocol such as OSPF is required across the VPN
Answer: D

Juniper최신덤프   JN0-330   JN0-330기출문제   JN0-330

NO.29 Click the Exhibit button.
Based on the exhibit, client PC 192.168.10.10 cannot ping 1.1.1.2.
Which is a potential cause for this problem?
A. The untrust zone does not have a management policy configured.
B. The trust zone does not have ping enabled as host-inbound-traffic service.
C. The security policy from the trust zone to the untrust zone does not permit ping.
D. No security policy exists for the ICMP reply packet from the untrust zone to the trust zone.
Answer: C

Juniper   JN0-330   JN0-330 pdf

ITexamdump의 000-318덤프의 VCE테스트프로그램과 CTAL-TM_Syll2012덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 00M-624시험에 대비한 고품질 덤프와 HH0-380시험 최신버전덤프를 제공해드립니다. 최고품질 642-997시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-330.html

Juniper JN0-331 최신덤프

ITExamDump에서는 가장 최신이자 최고인Juniper인증 JN0-331시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Juniper인증 JN0-331덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Juniper인증 JN0-331시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

ITExamDump 의 Juniper인증 JN0-331덤프는Juniper인증 JN0-331시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Juniper인증 JN0-331시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Juniper인증 JN0-331시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.

시험 번호/코드: JN0-331
시험 이름: Juniper (SEC,Specialist(JNCIS-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 131 문항
업데이트: 2014-04-14

ITExamDump는 믿을 수 있는 사이트입니다. IT업계에서는 이미 많이 알려져 있습니다. 그리고 여러분에 신뢰를 드리기 위하여 Juniper 인증JN0-331 관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있게 제공합니다. 아주 만족할 것이라고 믿습니다. ITExamDump제품에 대하여 아주 자신이 있습니다. Juniper 인증JN0-331 도 여러분의 무용지물이 아닌 아주 중요한 자료가 되리라 믿습니다. 여러분께서는 아주 순조로이 시험을 패스하실 수 있을 것입니다.

ITExamDump의Juniper인증 JN0-331시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Juniper인증 JN0-331시험대비덤프를 제공해드립니다.

JN0-331 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-331.html

NO.1 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms secures traffic by default; a traditional router does not secure
traffic by default.
C. JUNOS Software for security platforms allows for session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms separates broadcast domains; a traditional router does not
separate broadcast domains.
Answer: BC

Juniper기출문제   JN0-331   JN0-331기출문제

NO.2 Regarding attacks, which statement is correct?
A. Both DoS and propagation attacks exploit and take control of all unprotected network devices.
B. Propagation attacks focus on suspicious packet formation using the DoS SYN-ACK-ACK proxy flood.
C. DoS attacks are directed at the network protection devices, while propagation attacks are directed at
the servers.
D. DoS attacks are exploits in nature, while propagation attacks use trust relationships to take control of
the devices.
Answer: D

Juniper   JN0-331인증   JN0-331기출문제

NO.3 A traditional router is better suited than a firewall device for which function?
A. VPN establishment
B. packet-based forwarding
C. stateful packet processing
D. Network Address Translation
Answer: B

Juniper   JN0-331 dumps   JN0-331최신덤프   JN0-331

NO.4 Host A opens a Telnet connection to Host B. Host A then opens another Telnet connection to Host B.
These connections are the only communication between Host A and Host B. The security policy
configuration permits both connections.
How many flows exist between Host A and Host B?
A. 1
B. 2
C. 3
D. 4
Answer: D

Juniper   JN0-331시험문제   JN0-331시험문제   JN0-331

NO.5 By default, which condition would cause a session to be removed from the session table?
A. Route entry for the session changed.
B. Security policy for the session changed.
C. The ARP table entry for the source IP address timed out.
D. No traffic matched the session during the timeout period.
Answer: D

Juniper기출문제   JN0-331   JN0-331   JN0-331자료

NO.6 Which three functions are provided by JUNOS Software for security platforms? (Choose three.)
A. VPN establishment
B. stateful ARP lookups
C. Dynamic ARP inspection
D. Network Address Translation
E. inspection of packets at higher levels (Layer 4 and above)
Answer: ADE

Juniper dump   JN0-331   JN0-331

NO.7 Click the Exhibit button.
[edit groups]
user@host# show
node0 {
system {
host-name NODE0;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.1/24;
}
}
}
}
}
node1 {
system {
host-name NODE1;
}
interfaces {
fxp0 {
unit 0 {
family inet {
address 1.1.1.2/24;
}
}
}
}
}
In the exhibit, what is the function of the configuration statements?
A. This section is where you define all chassis clustering configuration.
B. This configuration is required for members of a chassis cluster to talk to each other.
C. You can apply this configuration in the chassis cluster to make configuration easier.
D. This section is where unique node configuration is applied.
Answer: D

Juniper   JN0-331   JN0-331

NO.8 Which two statements about JUNOS Software packet handling are correct? (Choose two.)
A. JUNOS Software applies service ALGs only for the first packet of a flow.
B. JUNOS Software uses fast-path processing only for the first packet of a flow.
C. JUNOS Software performs route and policy lookup only for the first packet of a flow.
D. JUNOS Software applies SCREEN options for both first and consecutive packets of a flow.
Answer: CD

Juniper자료   JN0-331   JN0-331   JN0-331 pdf

NO.9 Which two statements describe the difference between JUNOS Software for security platforms and a
traditional router? (Choose two.)
A. JUNOS Software for security platforms supports NAT and PAT; a traditional router does not support
NAT or PAT.
B. JUNOS Software for security platforms does not forward traffic by default; a traditional router forwards
traffic by default.
C. JUNOS Software for security platforms uses session-based forwarding; a traditional router uses
packet-based forwarding.
D. JUNOS Software for security platforms performs route lookup for every packet; a traditional router
performs route lookup only for the first packet.
Answer: BC

Juniper   JN0-331기출문제   JN0-331 pdf

NO.10 Regarding zone types, which statement is true?
A. You cannot assign an interface to a functional zone.
B. You can specifiy a functional zone in a security policy.
C. Security zones must have a scheduler applied.
D. You can use a security zone for traffic destined for the device itself.
Answer: D

Juniper자격증   JN0-331   JN0-331   JN0-331   JN0-331

NO.11 What is the purpose of a zone in JUNOS Software?
A. A zone defines a group of security devices with a common management.
B. A zone defines the geographic region in which the security device is deployed.
C. A zone defines a group of network segments with similar security requirements.
D. A zone defines a group of network segments with similar class-of-service requirements.
Answer: C

Juniper   JN0-331 dumps   JN0-331 dumps   JN0-331자료   JN0-331

NO.12 Users can define policy to control traffic flow between which two components? (Choose two.)
A. from a zone to the device itself
B. from a zone to the same zone
C. from a zone to a different zone
D. from one interface to another interface
Answer: BC

Juniper최신덤프   JN0-331최신덤프   JN0-331자격증

NO.13 Click the Exhibit button.
[edit schedulers]
user@host# show
scheduler now {
monday all-day;
tuesday exclude;
wednesday {
start-time 07:00:00 stop-time 18:00:00;
}
thursday {
start-time 07:00:00 stop-time 18:00:00;
}
}
[edit security policies from-zone Private to-zone External]
user@host# show
policy allowTransit {
match {
source-address PrivateHosts;
destination-address ExtServers;
application ExtApps;
}
then {
permit {
tunnel {
ipsec-vpn myTunnel;
}
}
}
scheduler-name now;
Based on the configuration shown in the exhibit, what are the actions of the security policy?
A. The policy will always permit transit packets and use the IPsec VPN myTunnel.
B. The policy will permit transit packets only on Monday, and use the IPsec VPN Mytunnel.
C. The policy will permit transit packets and use the IPsec VPN myTunnel all day Monday and
Wednesday 7am to 6pm, and Thursday 7am to 6pm.
D. The policy will always permit transit packets, but will only use the IPsec VPN myTunnel all day Monday
and Wednesday 7am to 6pm, and Thursday 7am to 6pm.
Answer: C

Juniper   JN0-331   JN0-331인증   JN0-331   JN0-331최신덤프   JN0-331

NO.14 What is the default session timeout for UDP sessions?
A. 30 seconds
B. 1 minute
C. 5 minutes
D. 30 minutes
Answer: C

Juniper기출문제   JN0-331덤프   JN0-331 pdf   JN0-331최신덤프   JN0-331최신덤프   JN0-331자격증

NO.15 For IKE phase 1 negotiations, when is aggressive mode typically used?
A. when one of the tunnel peers has a dynamic IP address
B. when one of the tunnel peers wants to force main mode to be used
C. when fragmentation of the IKE packet is required between the two peers
D. when one of the tunnel peers wants to specify a different phase 1 proposal
Answer: A

Juniper dump   JN0-331시험문제   JN0-331   JN0-331 pdf

NO.16 Which two statements are true regarding proxy ARP? (Choose two.)
A. Proxy ARP is enabled by default.
B. Proxy ARP is not enabled by default.
C. JUNOS security devices can forward ARP requests to a remote device when proxy ARP is enabled.
D. JUNOS security devices can reply to ARP requests intended for a remote device when proxy ARP is
enabled.
Answer: BD

Juniper dump   JN0-331덤프   JN0-331

NO.17 What are two components of the JUNOS Software architecture? (Choose two.)
A. Linux kernel
B. routing protocol daemon
C. session-based forwarding module
D. separate routing and security planes
Answer: BC

Juniper   JN0-331 dump   JN0-331시험문제

NO.18 Which two configurations are valid? (Choose two.)
A. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
security-zone blue {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}
}
B. [edit security zones]
user@host# show
security-zone red {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
}
security-zone blue {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
}
C. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}
D. [edit routing-instances]
user@host# show
red {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
blue {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}
Answer: AD

Juniper최신덤프   JN0-331 pdf   JN0-331   JN0-331   JN0-331   JN0-331

NO.19 In JUNOS Software, which three packet elements can be inspected to determine if a session already
exists? (Choose three.)
A. IP protocol
B. IP time-to-live
C. source and destination IP address
D. source and destination MAC address
E. source and destination TCP/UDP port
Answer: ACE

Juniper   JN0-331   JN0-331시험문제   JN0-331자격증   JN0-331시험문제

NO.20 Which two functions of JUNOS Software are handled by the data plane? (Choose two.)
A. NAT
B. OSPF
C. SNMP
D. SCREEN options
Answer: AD

Juniper   JN0-331   JN0-331   JN0-331

ITexamdump의 덤프의 VCE테스트프로그램과 C_TADM51_70덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-331시험에 대비한 고품질 덤프와 70-497시험 최신버전덤프를 제공해드립니다. 최고품질 JK0-U11시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-331.html

Juniper JN0-643 시험문제

ITExamDump의Juniper JN0-643인증시험의 자료 메뉴에는Juniper JN0-643인증시험실기와Juniper JN0-643인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Juniper JN0-643인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.

우리ITExamDump에서는 끊임없는 업데이트로 항상 최신버전의Juniper인증JN0-643시험덤프를 제공하는 사이트입니다, 만약 덤프품질은 알아보고 싶다면 우리ITExamDump 에서 무료로 제공되는 덤프일부분의 문제와 답을 체험하시면 되겠습니다, ITExamDump 는 100%의 보장 도를 자랑하며JN0-643시험은 한번에 패스할 수 있는 덤프입니다.

시험 번호/코드: JN0-643
시험 이름: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 201 문항
업데이트: 2014-04-14

Juniper인증JN0-643시험을 패스함으로 취업에는 많은 도움이 됩니다. ITExamDump는Juniper인증JN0-643시험패스로 꿈을 이루어주는 사이트입니다. 우리는Juniper인증JN0-643시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Juniper인증JN0-643시험을 응시할 수 있는 자료입니다.

ITExamDump의 Juniper인증 JN0-643덤프는 다른 덤프판매 사이트보다 저렴한 가격으로 여러분들께 가볍게 다가갑니다. Juniper인증 JN0-643덤프는 기출문제와 예상문제로 되어있어 시험패스는 시간문제뿐입니다.

경쟁이 치열한 IT업계에서 굳굳한 자신만의 자리를 찾으려면 국제적으로 인정받는 IT자격증 취득은 너무나도 필요합니다. Juniper인증 JN0-643시험은 IT인사들중에서 뜨거운 인기를 누리고 있습니다. ITExamDump는 IT인증시험에 대비한 시험전 공부자료를 제공해드리는 전문적인 사이트입니다.한방에 쉽게Juniper인증 JN0-643시험에서 고득점으로 패스하고 싶다면ITExamDump의Juniper인증 JN0-643덤프를 선택하세요.저렴한 가격에 비해 너무나도 높은 시험적중율과 시험패스율, 언제나 여러분을 위해 최선을 다하는ITExamDump가 되겠습니다.

JN0-643 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-643.html

NO.1 Which protocol reachability is advertised by OSPFv2?
A. IPv4
B. IPv5
C. IPv6
D. ISO
Answer: A

Juniper   JN0-643시험문제   JN0-643시험문제

NO.2 During the BGP route-resolution process, the Junos OS must calculate the appropriate
next-hop based on the BGP protocol next-hop attribute.
Which two routing tables are checked during this process in a default Junos configuration? (Choose
two.)
A. inet.0
B. inet.1
C. inet.2
D. inet.3
Answer: A,D

Juniper   JN0-643   JN0-643   JN0-643최신덤프   JN0-643 dump

NO.3 Which three attributes must a BGP update contain? (Choose three.)
A. next-hop
B. MED
C. origin
D. AS-path
E. local preference
Answer: A,C,D

Juniper   JN0-643   JN0-643자격증   JN0-643시험문제

NO.4 A network routes IPv4 traffic only. You want to add IPv6 to the network, but you must use a
single IGP for both IPv4 and IPv6 traffic.
Which protocol meets this requirement?
A. OSPFv2
B. BGPv4
C. ES-ISv1
D. OSPFv3
Answer: D

Juniper   JN0-643덤프   JN0-643자료   JN0-643

NO.5 Voice traffic is coming in on UDP port 17689. This traffic must be classified into the
expedited-forwarding forwarding class.
Which type of classifier is needed?
A. code point alias
B. rewrite marker
C. multifield
D. behavior aggregate
Answer: C

Juniper dumps   JN0-643   JN0-643   JN0-643   JN0-643자료

NO.6 A Layer 2 forwarding loop occurred on your network during a scheduled maintenance period.
You must prevent this behavior in the future.
Which protocol should you enable on the EX Series switch to address this condition in the future?
A. DVMRP
B. L2TPv3
C. STP
D. RSVP
Answer: C

Juniper dump   JN0-643자료   JN0-643   JN0-643   JN0-643

NO.7 You must configure your access switch with more than 3000 VLANs and you want the ability
to load-balance across them.
Which spanning-tree approach has the least impact on control-plane performance?
A. Configure your access switch with a load-balancing policy and apply it under [edit protocols rstp].
B. Configure your access switch for Rapid-PVST+.
C. Configure your access switch for MSTP , incorporating the use of MSTIs.
D. Configure your access switch for both VSTP and RSTP .
Answer: C

Juniper자료   JN0-643   JN0-643덤프

NO.8 You are implementing MSTP in your network.
Which three values must match on all switches within the MST region? (Choose three)
A. Context identifier
B. Region name
C. VLANs
D. Revision
E. Configuration manifest
Answer: B,C,D

Juniper자격증   JN0-643   JN0-643덤프   JN0-643

NO.9 Which option is a valid IPv6 multicast address?
A. fe80::205:8640:471:3200/ 64
B. ::172.16.0.5 /126
C. ff03:365:ba::23
D. ff01:cgfc:345:22::226:8ff:fee4:bf6f
Answer: C

Juniper최신덤프   JN0-643인증   JN0-643 dumps

NO.10 You are AS 6573.
Which AS path regular expression matches only routes originated in your AS?
A. "6573.*"
B. ".*"
C. "{"
D. "

JN0-380 덤프 Juniper 자격증 덤프

IT업계에 종사하는 분이라면 국제적으로 인정받는 IT인증시험에 도전하여 자격증을 취득하셔야 합니다. ITExamDump의 Juniper인증 JN0-380덤프는 이 시험에 참가한 IT인사들의 검증을 받은 최신 시험대비 공부자료입니다. ITExamDump의 Juniper인증 JN0-380덤프로 시험을 쉽게 패스하여 자격증을 취득하면 승진이나 연봉인상에 많은 편리를 가져다드립니다. 저희는 항상 여러분들의 곁을 지켜줄것입니다.

ITExamDump에서 발췌한 Juniper인증 JN0-380덤프는 전문적인 IT인사들이 연구정리한 최신버전 Juniper인증 JN0-380시험에 대비한 공부자료입니다. Juniper인증 JN0-380 덤프에 있는 문제만 이해하고 공부하신다면Juniper인증 JN0-380시험을 한방에 패스하여 자격증을 쉽게 취득할수 있을것입니다.

시험 번호/코드: JN0-380
시험 이름: Juniper (Wireless LAN, Specialist (JNCIS-WLAN))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 86 문항
업데이트: 2014-04-14

ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.

Juniper JN0-380 시험을 어떻게 통과할수 있을가 고민중이신 분들은ITExamDump를 선택해 주세요. ITExamDump는 많은 분들이 IT인증시험을 응시하여 성공하도록 도와주는 사이트입니다. 최고급 품질의Juniper JN0-380시험대비 덤프는Juniper JN0-380시험을 간단하게 패스하도록 힘이 되어드립니다. ITExamDump 의 덤프는 모두 엘리트한 전문가들이 만들어낸 만큼 시험문제의 적중률은 아주 높습니다.

JN0-380 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-380.html

NO.1 You have installed your AP in the proper location on your network. The AP needs to obtain
configuration information from a controller before it can support wireless clients.
What are three methods that an AP uses to do this? (Choose three.)
A. ICMP ping
B. Keepalive packets
C. DNS Lookup
D. L2 Broadcast
E. DHCP Option 43
Answer: C,D,E

Juniper dumps   JN0-380   JN0-380자료   JN0-380   JN0-380   JN0-380

NO.2 Which Juniper Networks WLA model supports spectrum analysis?
A. WLA371
B. WLA422
C. WLA532
D. WLA632
Answer: C

Juniper   JN0-380   JN0-380

NO.3 What is the hardware requirement for a RingMaster client?
A. Intel/AMD x86-compatible dual core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
B. Intel/AMD x86-compatible single core processor, 2.0Ghz, 2GB RAM, 512 MB HD space
C. Intel/AMD x86-compatible single core processor, 2.0Ghz, 1GB RAM, 1024 MB HD space
D. Intel/AMD x86-compatible dual core processor, 1.0Ghz, 1GB RAM, 512 MB HD space
Answer: A

Juniper   JN0-380자료   JN0-380 dumps
6. During the installation of RingMaster, you receive the installation error: "HTTPS Server port is
already in use. Please select another port."
What should you do to resolve this issue?
A. Change the HTTPS Server port number to 443.
B. Change the HTTPS Server port number so that it does not conflict with other applications.
C. Restart the installation process so that RingMaster can resolve the issue.
D. Change the SNMP Trap Receiver port to 162.
Answer: B

Juniper   JN0-380   JN0-380   JN0-380 dump
7. You are asked to troubleshoot a communication problem between a WLC and a RADIUS server.
You verified that the RADIUS server is reachable from the WLC.
Which WLC CLI command would be used for troubleshooting RADIUS connectivity?
A. rfping
B. show authentication
C. ping
D. radping
Answer: D

Juniper   JN0-380   JN0-380   JN0-380   JN0-380   JN0-380시험문제
8. In an auditorium, you have 200 wireless clients connecting to the wireless network. You want
to
configure RF load balancing to distribute client sessions across multiple APs in the area.
Which two parameters are configurable to achieve this? (Choose two.)
A. setting strictness
B. configuring auto-tune
C. defining transmit rates
D. setting band preference
Answer: A,D

Juniper   JN0-380최신덤프   JN0-380
9. You want to provide secure wireless services to one set of clients on your network and allow
open
access services to your guest clients. You need to configure service profiles for each type of
access to the network.
Which three methods are used to accomplish this? (Choose three.)
A. Configure one service per WLA.
B. Configure an encryption type.
C. Configure IP addresses.
D. Configure SSIDs.
E. Configure VLANs.
Answer: B,D,E

Juniper   JN0-380시험문제   JN0-380   JN0-380시험문제
10. Multiple users are complaining that their wireless connections are not working.
Which RingMaster screen would the administrator use for troubleshooting?
A. Alarms
B. Clients
C. Monitor
D. Verification
Answer: C

Juniper   JN0-380 pdf   JN0-380기출문제   JN0-380

NO.4 What is the maximum allowed configurable SSIDs per radio?
A. 8
B. 16
C. 32
D. 64
Answer: C

Juniper   JN0-380   JN0-380자료

NO.5 A user repeatedly calls in to the Help desk complaining about their wireless connection.
Which actions would test the user's wireless connectivity from RingMaster?
A. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the Location History option to find out if the client is near a functioning access point.
B. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
run the RF ping test to determine RSSI and retry counts to verify the RF environment being
reported by the AP to which the client is connected.
C. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
choose to terminate the client from the wireless network so they can reestablish a new session.
D. Locate the client in the client tools screen using the Find Clients tab. Once the client is located,
add the client to the Watched Client list to gather additional data on the clients signal strength and
data throughput.
Answer: B

Juniper기출문제   JN0-380자료   JN0-380 dumps   JN0-380

ITexamdump의 HP2-Z24덤프의 VCE테스트프로그램과 C4060-155덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-060시험에 대비한 고품질 덤프와 200-101시험 최신버전덤프를 제공해드립니다. 최고품질 000-318시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-380.html

도비 Juniper JN0-696 시험

많은 사이트에서도 무료Juniper JN0-696덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한Juniper JN0-696데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리ITExamDump에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다

우리ITExamDump 에서 여러분은 아주 간단히Juniper JN0-696시험을 패스할 수 있습니다. 만약 처음Juniper JN0-696시험에 도전한다면 우리의Juniper JN0-696시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게Juniper JN0-696시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의Juniper JN0-696자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.Juniper JN0-696로 빠른시일내에 자격증 취득하시고JuniperIT업계중에 엘리트한 전문가되시기를 바랍니다.

시험 번호/코드: JN0-696
시험 이름: Juniper (Security Support, Professional (JNCSP-SEC))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 36 문항
업데이트: 2014-04-14

근 몇년간IT산업이 전례없이 신속히 발전하여 IT업계에 종사하는 분들이 여느때보다 많습니다. 경쟁이 이와같이 치열한 환경속에서 누구도 대체할수 없는 자기만의 자리를 찾으려면 IT인증자격증취득은 무조건 해야 하는것이 아닌가 싶습니다. Juniper인증 JN0-696시험은 IT인증시험중 가장 인기있는 시험입니다. ITExamDump에서는 여러분이Juniper인증 JN0-696시험을 한방에 패스하도록 실제시험문제에 대비한Juniper인증 JN0-696덤프를 발췌하여 저렴한 가격에 제공해드립니다.시험패스 못할시 덤프비용은 환불처리 해드리기에 고객님께 아무런 페를 끼치지 않을것입니다.

다른 방식으로 같은 목적을 이룰 수 있다는 점 아세요? 여러분께서는 어떤 방식, 어느 길을 선택하시겠습니까? 많은 분들은Juniper인증JN0-696시험패스로 자기 일에서 생활에서 한층 업그레이드 되기를 바랍니다. 하지만 모두 다 알고계시는그대로Juniper인증JN0-696시험은 간단하게 패스할 수 있는 시험이 아닙니다. 많은 분들이Juniper인증JN0-696시험을 위하여 많은 시간과 정신력을 투자하고 있습니다. 하지만 성공하는 분들은 적습니다.

ITExamDump의Juniper인증 JN0-696덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는Juniper인증 JN0-696덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. Juniper인증 JN0-696덤프로Juniper인증 JN0-696시험을 준비하여 한방에 시험패하세요.

JN0-696 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-696.html

NO.1 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D

Juniper   JN0-696시험문제   JN0-696 dump   JN0-696덤프

NO.2 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C

Juniper인증   JN0-696 dumps   JN0-696

NO.3 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C

Juniper   JN0-696자격증   JN0-696자료   JN0-696

NO.4 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B

Juniper   JN0-696   JN0-696   JN0-696   JN0-696

NO.5 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D

Juniper   JN0-696자격증   JN0-696   JN0-696   JN0-696덤프

NO.6 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A

Juniper   JN0-696기출문제   JN0-696   JN0-696   JN0-696인증

ITexamdump의 74-338덤프의 VCE테스트프로그램과 MB3-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-619시험에 대비한 고품질 덤프와 70-246시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-404시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-696.html

2014년 2월 19일 수요일

Juniper 자격증 JN0-521 시험문제와 답

경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Juniper인증 JN0-521시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Juniper인증 JN0-521덤프에 있는 문제만 잘 이해하고 습득하신다면Juniper인증 JN0-521시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.

ITExamDump는 모든 IT관련 인증시험자료를 제공할 수 있는 사이트입니다. 우리ITExamDump는 여러분들한테 최고 최신의 자료를 제공합니다. ITExamDump을 선택함으로 여러분은 이미Juniper JN0-521시험을 패스하였습니다. 우리 자료로 여러분은 충분히Juniper JN0-521를 패스할 수 있습니다. 만약 시험에서 떨어지셨다면 우리는 백프로 환불은 약속합니다. 그리고 갱신이 된 최신자료를 보내드립니다. 하지만 이런사례는 거이 없었습니다.모두 한번에 패스하였기 때문이죠. ITExamDump는 여러분이Juniper JN0-521인증시험 패스와 추후사업에 모두 도움이 되겠습니다. Pass4Tes의 선택이야말로 여러분의 현명한 선택이라고 볼수 있습니다. Pass4Tes선택으로 여러분은 시간도 절약하고 돈도 절약하는 일석이조의 득을 얻을수 있습니다. 또한 구매후 일년무료 업데이트버전을 바을수 있는 기회를 얻을수 있습니다.

IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Juniper 인증 JN0-521시험은 아주 유용한 시험입니다. Juniper 인증JN0-521시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는Juniper 인증JN0-521시험대비덤프를 출시하였습니다. ITExamDump에서 제공해드리는Juniper 인증JN0-521시험덤프는 시장에서 판매하고 있는Juniper 인증JN0-521덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.

IT업계에 종사하고 계시나요? 최근 유행하는Juniper인증 JN0-521 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Juniper인증 JN0-521덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Juniper인증 JN0-521덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

Juniper인증JN0-521시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Juniper인증JN0-521시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.

시험 번호/코드: JN0-521
시험 이름: Juniper (FWV.Associate (JNCIA-FWV))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 119 문항
업데이트: 2014-02-18

Juniper JN0-521인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.Juniper JN0-521시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는Juniper JN0-521관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸Juniper JN0-521관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게Juniper JN0-521응시하는데 많은 도움이 될 것입니다.

JN0-521 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-521.html

NO.1 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB

Juniper자격증   JN0-521   JN0-521

NO.2 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D

Juniper   JN0-521인증   JN0-521   JN0-521

NO.3 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D

Juniper pdf   JN0-521시험문제   JN0-521인증   JN0-521자격증   JN0-521최신덤프

NO.4 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A

Juniper   JN0-521자격증   JN0-521   JN0-521 dump

NO.5 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C

Juniper자료   JN0-521최신덤프   JN0-521

NO.6 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C

Juniper시험문제   JN0-521자료   JN0-521   JN0-521자료   JN0-521

NO.7 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC

Juniper덤프   JN0-521   JN0-521인증   JN0-521

NO.8 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B

Juniper   JN0-521   JN0-521   JN0-521

NO.9 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE

Juniper자격증   JN0-521   JN0-521   JN0-521

NO.10 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B

Juniper   JN0-521   JN0-521   JN0-521   JN0-521최신덤프

NO.11 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D

Juniper dump   JN0-521   JN0-521   JN0-521 dump   JN0-521 dump

NO.12 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D

Juniper기출문제   JN0-521기출문제   JN0-521자격증   JN0-521   JN0-521

NO.13 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE

Juniper   JN0-521   JN0-521

NO.14 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C

Juniper인증   JN0-521 dumps   JN0-521   JN0-521최신덤프   JN0-521

NO.15 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B

Juniper자격증   JN0-521   JN0-521

NO.16 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C

Juniper자격증   JN0-521   JN0-521

NO.17 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B

Juniper dump   JN0-521시험문제   JN0-521

NO.18 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC

Juniper pdf   JN0-521 dumps   JN0-521   JN0-521   JN0-521시험문제   JN0-521

NO.19 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C

Juniper   JN0-521   JN0-521자료   JN0-521기출문제   JN0-521

NO.20 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B

Juniper시험문제   JN0-521   JN0-521

NO.21 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C

Juniper최신덤프   JN0-521 dumps   JN0-521 dump

NO.22 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C

Juniper   JN0-521   JN0-521 dumps   JN0-521

NO.23 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B

Juniper   JN0-521   JN0-521   JN0-521

NO.24 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A

Juniper덤프   JN0-521덤프   JN0-521자격증

NO.25 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A

Juniper인증   JN0-521최신덤프   JN0-521   JN0-521

NO.26 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C

Juniper기출문제   JN0-521자료   JN0-521자격증   JN0-521 dumps   JN0-521

NO.27 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-521 pdf   JN0-521

NO.28 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D

Juniper   JN0-521자료   JN0-521 dump   JN0-521

NO.29 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D

Juniper   JN0-521최신덤프   JN0-521자료   JN0-521 dumps

NO.30 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A

Juniper   JN0-521 dumps   JN0-521   JN0-521   JN0-521자격증

ITexamdump의 EN0-001덤프의 VCE테스트프로그램과 LOT-407덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 VCAP5-DCD시험에 대비한 고품질 덤프와 000-087시험 최신버전덤프를 제공해드립니다. 최고품질 000-652시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-521.html

Juniper JN0-562 덤프자료

ITExamDump에는 전문적인 업계인사들이Juniper JN0-562시험문제와 답에 대하여 연구하여, 시험준비중인 여러분들한테 유용하고 필요한 시험가이드를 제공합니다. 만약ITExamDump의 제품을 구매하려면, 우리ITExamDump에서는 아주 디테일 한 설명과 최신버전 최고품질의자료를 즉적중율이 높은 문제와 답을제공합니다.Juniper JN0-562자료는 충분한 시험대비자료가 될 것입니다. 안심하시고 ITExamDump가 제공하는 상품을 사용하시고, 100%통과 율을 확신합니다.

IT업계에 종사하는 분들은 치열한 경쟁을 많이 느낄것입니다. 치열한 경쟁속에서 자신의 위치를 보장하는 길은 더 많이 배우고 더 많이 노력하는것 뿐입니다.국제적으로 인정받은 IT인증자격증을 취득하는것이 제일 중요한 부분이 아닌가 싶기도 합니다. 다른 분이 없는 자격증을 내가 소유하고 있다는 생각만 해도 뭔가 안전감이 느껴지지 않나요? 더는 시간낭비하지 말고ITExamDump의Juniper인증 JN0-562덤프로Juniper인증 JN0-562시험에 도전해보세요.

시험 번호/코드: JN0-562
시험 이름: Juniper (Certified Internet Associate (JNCIA-SSL) 562 Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-02-18

ITExamDump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. ITExamDump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고Juniper JN0-562자격증을 취득하실 수 있습니다.지금 바로 사이트에서Juniper JN0-562덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.

Juniper인증 JN0-562시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Juniper인증 JN0-562시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Juniper인증 JN0-562덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.

많은 시간과 정신력을 투자하고 모험으로Juniper인증JN0-562시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.

ITExamDump에서는 가장 최신이자 최고인Juniper인증 JN0-562시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Juniper인증 JN0-562덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Juniper인증 JN0-562시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

JN0-562 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-562.html

NO.1 Resource Profiles support creating policies for which two technologies? (Choose two.)
A. secure meeting
B. network connect
C. terminal services
D. Web applications
Answer: CD

Juniper dumps   JN0-562 dump   JN0-562   JN0-562자료   JN0-562

NO.2 Where is the IVE typically deployed in the network?
A. behind the Internet firewall
B. internally with all clients directly cabled to the IVE
C. both interfaces on the outside of the Internet firewall
D. parallel to the Internet firewall with one interface on the outside and one on the inside
Answer: A

Juniper pdf   JN0-562   JN0-562

NO.3 Which two statements about SSL VPNs are true? (Choose two.)
A. SSL VPNs provide better security than IPSEC.
B. SSL VPNs provide a dedicated, point to point connection.
C. SSL VPNs provide high performance for individual connections.
D. SSL VPNs use well-known technologies for secure individual connections.
Answer: CD

Juniper dump   JN0-562 dumps   JN0-562   JN0-562 pdf   JN0-562   JN0-562

NO.4 Which statement accurately describes Resource Profiles?
A. Resource Profiles are a collection of resources and ACLs.
B. Resource Profiles are where ACLs are setup for resources.
C. Resource Profiles are a collection of resources and their discriptions.
D. Resource Profiles are where the resource, role, and ACL are in one location.
Answer: D

Juniper   JN0-562   JN0-562   JN0-562기출문제

NO.5 What are two possible reasons for W-SAM not starting on the client? (Choose two.)
A. Java is disabled in the Sign-in policy.
B. ActiveX autoinstall is disabled in the role.
C. A popup blocker is installed on the client machine.
D. The user does not have administrator privileges on the machine.
Answer: CD

Juniper dumps   JN0-562인증   JN0-562인증   JN0-562   JN0-562

NO.6 Which User Role session option provides you with the capability to cache basic authentication
information so users are not challenged repeatedly for the same credentials?
A. roaming session
B. persistent session
C. persistent password caching
D. browser request follow-through
Answer: C

Juniper최신덤프   JN0-562   JN0-562 dump   JN0-562자료   JN0-562기출문제

NO.7 You want to configure Network Connect to allow users to connect through a tunnel, connect to hosts on
the same subnet as their local adapter, and shut down any attempt to extend the network boundaries.
How do you proceed?
A. Enable split tunneling.
B. Disable split tunneling.
C. Enable split tunneling with route change monitor.
D. Allow access to local subnet with route change monitor.
Answer: D

Juniper최신덤프   JN0-562   JN0-562   JN0-562 pdf

NO.8 When using the J-SAM, where on a client machine would you look to verify that the loopback
addresses are assigned correctly?
A. HOSTS file
B. ARP cache
C. LMHOSTS file
D. local route table
Answer: A

Juniper시험문제   JN0-562덤프   JN0-562 dump   JN0-562

NO.9 Which three authentication servers are included with a baseline license? (Choose three.)
A. NIS
B. ACE
C. SAML
D. LDAP
E. SiteMinder
Answer: ABD

Juniper   JN0-562   JN0-562자격증

NO.10 Which two Web Resource Policy features provide you with the capability to configure the IVE to work
with corporate Proxy Servers? (Choose two.)
A. Web Proxy Policies
B. Web Proxy Servers
C. Web Cache Policies
D. Web Passthrough Proxy
Answer: AB

Juniper   JN0-562인증   JN0-562시험문제   JN0-562

NO.11 You create a set of role mapping rules. You select "Merge settings for all assigned roles." The second
role mapping rule has the "Stop processing rules when this rule matches" option selected. A user logs in
that matches the first three rules. What happens?
A. This is not a valid combination. The system displays an error message and does not update the
configuration.
B. The merge settings override the stop processing option. The user matches all three roles and merging
follows the standard merging criteria.
C. The Stop rule prevents any more rule matching after checking the second rule. The merge option only
merges the roles of the first two rules following the IVE's built-in permissive merging rules.
D. The Stop rule prevents any more rule matching after checking the second rule. The user now just
matches the second rule. The merge option is overridden and the user is given only the privileges defined
by the second role.
Answer: C

Juniper   JN0-562   JN0-562

NO.12 You are using RADIUS as your authorization server. Other than username, which two attributes are
available for creating role mapping rules? (Choose two.)
A. Certificate
B. User Attribute
C. RSA Attributes
D. Group Membership
Answer: AB

Juniper인증   JN0-562덤프   JN0-562   JN0-562최신덤프

NO.13 What is the minimum information that must be configured by an administrator to create a resource
policy? (Choose two.)
A. resource
B. username
C. policy name
D. session timeout
Answer: AC

Juniper   JN0-562   JN0-562 dump

NO.14 What are two reasons for using Network Connect? (Choose two.)
A. When the ability to disable split tunneling is required.
B. When the client will need to redirect traffic based on process name.
C. When the client will use applications with server-initiated connections.
D. When the client will not have administrator privileges on their machines.
Answer: AC

Juniper시험문제   JN0-562   JN0-562

NO.15 What are two benefits of using SSL? (Choose two.)
A. SSL is supported in all Web browsers.
B. SSL usually requires no client-side configuration.
C. The SSL client is smaller than most IPSec clients, with half the options to configure than that of an
IPSec client.
D. SSL outperforms IPSec on every level because it operates at the network layer rather than the
application layer.
Answer: AB

Juniper dump   JN0-562   JN0-562덤프

NO.16 Which resource example should you use to define resource access to a UNIX file share?
A. server/user
B. \\server\share
C. tcp://host:443
D. tcp://host:137/users
Answer: A

Juniper   JN0-562자료   JN0-562자격증   JN0-562

NO.17 Which two Terminal Services clients can be delivered automatically from the IVE to users? (Choose
two.)
A. Citrix ICA
B. Tera Term
C. SecureCRT
D. Windows Terminal Service
Answer: AD

Juniper   JN0-562   JN0-562덤프   JN0-562   JN0-562 dump

NO.18 What does a sign-in policy map users to when browsing a specified URL?
A. A list of possible user roles.
B. Specific resources as stated in resource policies.
C. The URL presents one or more authentication realms to the user for authentication.
D. The login is passed to an authentication server for verification, and an authorization server for user
attribute information.
Answer: C

Juniper   JN0-562기출문제   JN0-562

NO.19 What is Cache Cleaner used for?
A. to prevent users from signing in from insecure machines
B. to remove content downloaded during the IVE session
C. to remove Web content cached by the IVE on behalf of the user
D. to determine which files should be cached between remote access sessions
Answer: B

Juniper   JN0-562   JN0-562 dump

NO.20 Which role-based session option would an administrator configure to allow a user to connect from
different source IP addresses within the same user session?
A. roaming session
B. persistent session
C. persistent password caching
D. browser request follow-through
Answer: A

Juniper기출문제   JN0-562   JN0-562   JN0-562

ITexamdump의 312-50v8덤프의 VCE테스트프로그램과 EX0-118덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 000-588시험에 대비한 고품질 덤프와 70-341시험 최신버전덤프를 제공해드립니다. 최고품질 70-461시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-562.html