Juniper JN0-360 인증시험

ITExamDump의Juniper인증 JN0-360덤프는 시험패스율이 거의 100%에 달하여 많은 사랑을 받아왔습니다. 저희 사이트에서 처음 구매하는 분이라면 덤프풀질에 의문이 갈것입니다. 여러분이 신뢰가 생길수 있도록ITExamDump에서는Juniper인증 JN0-360덤프구매 사이트에 무료샘플을 설치해두었습니다.무료샘플에는 5개이상의 문제가 있는데 구매하지 않으셔도 공부가 됩니다. Juniper인증 JN0-360덤프로Juniper인증 JN0-360시험을 준비하여 한방에 시험패하세요.

ITExamDump 에서 출시한 Juniper인증JN0-360시험덤프는 100%시험통과율을 보장해드립니다. 엘리트한 IT전문가들이 갖은 노력으로 연구제작한Juniper인증JN0-360덤프는 PDF버전과 소프트웨어버전 두가지 버전으로 되어있습니다. 구매전 PDF버전무료샘플로ITExamDump제품을 체험해보고 구매할수 있기에 신뢰하셔도 됩니다. 시험불합격시 불합격성적표로 덤프비용을 환불받을수 있기에 아무런 고민을 하지 않으셔도 괜찮습니다.

ITExamDump는 유일하게 여러분이 원하는Juniper인증JN0-360시험관련자료를 해결해드릴 수 잇는 사이트입니다. 여러분이 다른 사이트에서도 관련덤프자료를 보셨을경우 페이지 아래를 보면 자료출처는 당연히 ITExamDump 일 것입니다. ITExamDump의 자료만의 제일 전면적이고 또 최신 업데이트일 것입니다.

멋진 IT전문가로 거듭나는 것이 꿈이라구요? 국제적으로 승인받는 IT인증시험에 도전하여 자격증을 취득해보세요. IT전문가로 되는 꿈에 더 가까이 갈수 있습니다. Juniper인증 JN0-360시험이 어렵다고 알려져있는건 사실입니다. 하지만ITExamDump의Juniper인증 JN0-360덤프로 시험준비공부를 하시면 어려운 시험도 간단하게 패스할수 있는것도 부정할수 없는 사실입니다. ITExamDump의Juniper인증 JN0-360덤프는 실제시험문제의 출제방형을 철저하게 연구해낸 말 그대로 시험대비공부자료입니다. 덤프에 있는 내용만 마스터하시면 시험패스는 물론 멋진 IT전문가로 거듭날수 있습니다.

만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Juniper JN0-360인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.

시험 번호/코드: JN0-360
시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 252 문항
업데이트: 2014-02-18

많은 시간과 정신력을 투자하고 모험으로Juniper인증JN0-360시험에 도전하시겠습니까? 아니면 우리ITExamDump 의 도움으로 시간을 절약하시겠습니까? 요즘 같은 시간인 즉 모든 것인 시대에 여러분은 당연히 ITExamDump의 제품이 딱 이라고 생각합니다. 그리고 우리 또한 그 많은 덤프판매사이트 중에서도 단연 일등이고 생각합니다. 우리 ITExamDump선택함으로 여러분은 성공을 선택한 것입니다.

JN0-360 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-360.html

NO.1 For a network running single-area OSPF, how would you decrease the size of the link-state
database (LSDB)?
A. Implement RIP as an overlay protocol on all devices.
B. Add more devices to the OSPF network to help with LSDB processing.
C. Reduce the frequency of hello timers throughout the network.
D. Implement OSPF areas.
Answer: B

Juniper   JN0-360시험문제   JN0-360   JN0-360최신덤프   JN0-360   JN0-360

NO.2 Which label operation is performed by an MPLS transit router?
A. inject
B. pop
C. push
D. swap
Answer: A

Juniper인증   JN0-360기출문제   JN0-360   JN0-360 pdf

NO.3 In which environment would you run BGP?
A. a company spread across multiple floors of a building
B. a company with a single office
C. a home network
D. the public Internet
Answer: C

Juniper   JN0-360   JN0-360자격증   JN0-360 dump   JN0-360

NO.4 Which two statements are true about MPLS VPNs? (Choose two.)
A. With Layer 3 VPNs, the provider's routers participate in the customer's Layer 3 routing.
B. MPLS VPNs are designed to run over private networks rather than the public Internet.
C. With Layer 2 VPNs, the provider does not participate in the routing of the customer's private IP
traffic.
D. MPLS VPN tunnels are always encrypted.
Answer: B,D

Juniper   JN0-360   JN0-360   JN0-360최신덤프

NO.5 What are Martian addresses on a Junos device?
A. IP addresses that are reserved for use only with MPLS VPNs.
B. IP addresses that are never installed in the routing table.
C. IP addresses that are reserved for use only with GRE tunnels.
D. IP addresses specifically used for out-of-band management.
Answer: A

Juniper dump   JN0-360   JN0-360   JN0-360   JN0-360 dumps   JN0-360
7. Which statement correctly describes the difference between a generated and an aggregate
route?
A. An aggregate route can be a supernet whereas generated routes are classful.
B. A generated route has a forwarding next hop that is inherited from a contributing route.
C. An aggregate route has a forwarding next hop that is inherited from a contributing route.
D. Only aggregate routes can be re-advertised through BGP using a policy.
Answer: B

Juniper   JN0-360   JN0-360시험문제   JN0-360   JN0-360
8. Which statement is true regarding the default master routing instance?
A. All IPv4 routes in the master routing instance are shared with user-defined routing instances.
B. Interface routes in the master routing instance are shared with user-defined routing instances.
C. Routes in the master routing instance are not shared with user-defined routing instances.
D. All routes in the master routing instance are shared with user-defined routing instances.
Answer: C

Juniper자료   JN0-360기출문제   JN0-360시험문제   JN0-360
9. Which routing table contains the route information for the user-defined routing instance
called Candidate1?
A. inet.Candidate1.0
B. Candidate1.inet.0
C. inet.0
D. Candidate1-inet.0
Answer: B

Juniper   JN0-360인증   JN0-360 dumps   JN0-360 pdf   JN0-360   JN0-360
10. Which two routing-instance types are used for non-VPN-related applications? (Choose two.)
A. virtual-router
B. vrf
C. forwarding
D. vpls
Answer: A,C

Juniper   JN0-360기출문제   JN0-360   JN0-360   JN0-360 dumps

NO.6 Which Junos platform supports provider bridging?
A. T Series devices
B. SRX Series devices
C. MX Series devices
D. MAG Series devices
Answer: D

Juniper시험문제   JN0-360 dumps   JN0-360최신덤프   JN0-360 pdf   JN0-360

ITexamdump의 HP2-B97덤프의 VCE테스트프로그램과 MB3-701덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-461시험에 대비한 고품질 덤프와 00M-620시험 최신버전덤프를 제공해드립니다. 최고품질 C4040-225시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-360.html

JN0-332 JN0-101 JN0-360 JN0-343 JN0-331 덤프 Juniper 자격증 덤프

ITExamDump는Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Juniper JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

자기한테 딱 맞는 시험준비공부자료 마련은 아주 중요한 것입니다. ITExamDump는 업계에 많이 알려져있는 덤프제공 사이트입니다. ITExamDump덤프자료가 여러분의 시험준비자료로 부족한 부분이 있는지는 구매사이트에서 무료샘플을 다운로드하여 덤프의일부분 문제를 우선 체험해보시면 됩니다. ITExamDump에서 제공해드리는 퍼펙트한 덤프는 여러분이 한방에 시험에서 통과하도록 최선을 다해 도와드립니다.

만약Juniper인증JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험을 통과하고 싶다면, Pass4Tes의 선택을 추천합니다. Pass4Tes선택은 가장 적은 투자로 많은 이익을 가져올 수 있죠, Pass4Tes에서 제공하는Juniper인증JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험덤프로 시험패스는 문제없스니다. ITExamDump는 전문적으로 it인증시험관련문제와 답을 만들어내는 제작팀이 있으며, Pass4Tes 이미지 또한 업계에서도 이름이 있답니다

시험 번호/코드: JN0-332

시험 이름: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))

시험 번호/코드: JN0-101

시험 이름: Juniper (JNCIA-JUNOS EXAM OBJECTIVES)

시험 번호/코드: JN0-360

시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-SP))

시험 번호/코드: JN0-343

시험 이름: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))

시험 번호/코드: JN0-331

시험 이름: Juniper (SEC,Specialist(JNCIS-SEC))

Juniper인증 JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Juniper인증 JN0-332 JN0-101 JN0-360 JN0-343 JN0-331시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Juniper인증 JN0-332 JN0-101 JN0-360 JN0-343 JN0-331덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.

JN0-360 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-360.html

NO.1 You have configured an IP-IP tunnel between Router A and Router B
Which Junos operational mode command is used to verify that the tunnel interface is up and operational?
A.show chassis tunnel status
B.show tunnel interface
C.show interfaces terse
D.show interfaces tunnel
Answer: C

Juniper   JN0-360   JN0-360덤프

NO.2 Router A is an OSPF router connected to both Area 0 and Area 1 Area 1 has been configured as a stub
area Which two LSA types does Router A suppress from Area 1 ?
A.Router LSA
B.External LSA
C.Summary LSA
D.ASBR Summary LSA
Answer: B D

Juniper dump   JN0-360자격증   JN0-360 dumps   JN0-360   JN0-360

NO.3 Which BGP state denotes a fully operational session?
A.Established
B.Active
C.Operational
D.Connect
Answer: A

Juniper인증   JN0-360자료   JN0-360인증

NO.4 You are logged into a router and have navigated to the (edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 10.10.10.1 as its primary next-hop and 10.10.10.5
as its secondary next-hop.
Which command correctly configures this scenario?
A.set static route 8/8 10.10.10.1 qualified-next-hop 10.10.10.5 pref 10
B.set static route 8/8 next-hop 10.10.10.1 secondary-next-hop 10.10.10.5 preference 10
C.set static route 8/8 next-hop 10.10.10.1 qualified-next-hop 10.10.10.5 preference 10
D.set static route 8/8 next-hop [10.10.10.1 10.10.10.5] pref 10
Answer: C

Juniper   JN0-360 dump   JN0-360기출문제   JN0-360자료

NO.5 You have been asked to define a default gateway for traffic leaving a router. This route should use
interface so-0/0/0 as its next-hop.Which type of route would be suited for this scenario?
A.a static route
B.a generated route
C.a martian route
D.an aggregate route
Answer: A

Juniper   JN0-360자격증   JN0-360   JN0-360   JN0-360시험문제

NO.6 Which two values displayed in the output from the show spanning-tree MSTP configuration command
must match on all switches participating in the same MSTP region? (Choose two)
A.root bridge identifier
B.authentication checksum
C.context identifier
D.configuration digest
Answer: CD

Juniper   JN0-360최신덤프   JN0-360자료   JN0-360

NO.7 Click the Exhibit button
Referring to the network illustrated in the exhibit, how does router A reach destinations in area 49.2222?
A.Router A will use the routes from area 49.2222; it learns from router B
B.Router A will see the attached bit from router B and create a default route
C.Router A must have a default route manually configured
D.Router A will receive a default route in the IS-IS update from router B
Answer: B

Juniper최신덤프   JN0-360   JN0-360   JN0-360시험문제

NO.8 Click the Exhibit button
In the exhibit, OSPF routers R1, R2, R3, and R4 come up, in order, at 1-minute intervals
Which router will be the designated router?.
A.R1
B.R2
C.R3
D.R4
Answer: A

Juniper   JN0-360   JN0-360시험문제   JN0-360기출문제   JN0-360   JN0-360

NO.9 What is the function of the hop limit field in the IPv6 header?
A.It limits the diameter of the network to 20 hops
B.It sets the number of hops in the network to be equal to the MPLS header time-to-live (TTL)
C.It replaces the time-to-live (TTL) field in IPv4
D.It represents future extensibility to the protocol
Answer: C

Juniper dumps   JN0-360   JN0-360덤프   JN0-360덤프

NO.10 Which role does the router ID (RID) have in the BGP route selection process?
A.The router ID is evaluated immediately after MED to determine route preference
B.The router ID is evaluated last in the route selection process
C.The router ID is evaluated after the cluster length and a lower router ID is chosen
D.The router ID is evaluated after analyzing the IGP metric cost
Answer: C

Juniper dumps   JN0-360   JN0-360최신덤프   JN0-360 dump

NO.11 You have recently implemented a graceful Routing-Engine switchover (GRES) and want to further
reduce down time if a Routing Engine (RE) failure occurs.
Which two features can be configured on this device to reduce its downtime in this situation? (Choose
two)
A.VRRP
B.GR
C.BFD
D.NSR
Answer: B D

Juniper   JN0-360자료   JN0-360   JN0-360 pdf   JN0-360

NO.12 You are logged into a router and have navigated to the [edit routing-options] level of the hierarchy. You
have been asked to create a static route that will use 43 18 7 1 as its primary next-hop and 76 1310 2 as
its secondary next-hop.
Which command correctly configures this setup?
A.set static route 0/0 76.13.10.2 qualified-next-hop 43.18.7.1 pref 10
B.set static route 0/0 next-hop 43.18.7.1 secondary-next-hop 76.13.10.2 preference 10
C.set static route 0/0 next-hop [76.13.10.2 10.10.10.5] pref 10
D.set static route 0/0 next-hop 43.18.7.1 qualified-next-hop 76.13.10.2 preference 10
Answer: D

Juniper덤프   JN0-360덤프   JN0-360   JN0-360인증

NO.13 Click the Exhibit button
Based on the illustration of the VPLS topology shown in the exhibit, which statement is true?
A.PE-C must have a spanning-tree protocol enabled
B.CE-C must have BGP enabled
C.Traffic forwarded from PE-C to PE-A is forwarded on to PE-B
D.Traffic forwarded from PE-C to PE-A is not forwarded on to PE-B
Answer: D

Juniper   JN0-360   JN0-360   JN0-360자료   JN0-360시험문제

NO.14 Which IS-IS packet is used to determine the level of an IS-IS neighbor?
A.IIH
B.LSP
C.PSNP
D.CSNP
Answer: A

Juniper   JN0-360   JN0-360 pdf   JN0-360

NO.15 Click the Exhibit button
You work for the regional Internet service provider shown in the exhibit You have a partial BGP table and
are receiving a 10 100/16 route from your upstream ISP You have been asked to configure a default route
that can be sent to your downstream customer This route should forward customer traffic toward your
upstream Tier 11SP as long as the 10.100/16 route is present.
What would accomplish this goal?
A.Create and announce an aggregate default route
B.Create and announce a static default route with a next-hop of discard
C.Create and announce a static default route with a next-hop of reject
D.Create and announce a generated default route
E.Create an advertise-map with exist-map
Answer: E

Juniper최신덤프   JN0-360기출문제   JN0-360   JN0-360기출문제

NO.16 What are two valid actions that can be applied to a frame by a Layer 2 firewall filter?
(Choose two)
A.Log
B.loss-priority
C.sample
D.count
Answer: BD

Juniper dump   JN0-360최신덤프   JN0-360   JN0-360

NO.17 Which two statements describe differences between IPv4 and IPv6.? (Choose two)
A.IPsec is built into IPv6
B.IPv6 uses a 32-bit (4-byte) address and can support up to 4,294,967,296 addresses
C.IPv4 supports extension headers whereas IPv6 options are integrated into the base
D.IPv6 eliminates the need for NAT
Answer: AD

Juniper최신덤프   JN0-360 dump   JN0-360   JN0-360   JN0-360시험문제

NO.18 You must configure an OSPF area that does not accept type 3 link-state advertisements (LSAs) from
area 0 (other than the default route) You have configured your area to be stub, but you still see type 3
LSAs.
What will account for this behavior?
A.You should have configured your area as totally stubby
B.You should have used a not-so-stubby-area
C.You are experiencing a routing loop
D.You have exported routes into OSPF
Answer: A

Juniper   JN0-360시험문제   JN0-360 dump   JN0-360자격증   JN0-360인증

NO.19 You have been asked to configure an IPv6 address for a group of interfaces that could belong on
different routers. If a packet is sent to that address, it should be received by all routers in the group.
Which address type would be suited for these requirements?
A.Unicast
B.Multicast
C.Anycast
D.Broadcast
Answer: B

Juniper   JN0-360   JN0-360인증   JN0-360자료

NO.20 Which Junos operational mode command is used to verify that load balancing is working as expected?
A.show route all
B.show route extensive
C.show route balancing
D.show route forwarding-table
Answer: D

Juniper   JN0-360자격증   JN0-360자격증   JN0-360