IBM 000-736 덤프

ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 IBM인증000-736시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 IBM인증000-736덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.

비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. ITExamDump덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 ITExamDump 덤프품질을 증명해드립니다.

IBM 000-736인증시험은 전업적지식이 강한 인증입니다. IT업계에서 일자리를 찾고 계시다면 많은 회사에서는IBM 000-736있는지 없는지에 알고 싶어합니다. 만약IBM 000-736자격증이 있으시다면 여러분은 당연히 경쟁력향상입니다.

ITExamDump 의 학습가이드에는IBM 000-736인증시험의 예상문제, 시험문제와 답입니다. 그리고 중요한 건 시험과 매우 유사한 시험문제와 답도 제공해드립니다. ITExamDump 을 선택하면 ITExamDump 는 여러분을 빠른시일내에 시험관련지식을 터득하게 할 것이고IBM 000-736인증시험도 고득점으로 패스하게 해드릴 것입니다.

시험 번호/코드: 000-736

시험 이름: IBM (DB2 9 Database Admin for Linux,UNIX,and Windows Upgrade)

IBM인증 000-736시험은 중요한 IT인증자격증을 취득하는 필수시험과목입니다IBM인증 000-736시험을 통과해야만 자격증 취득이 가능합니다.자격증을 많이 취득하면 자신의 경쟁율을 높여 다른능력자에 의해 대체되는 일은 면할수 있습니다.ITExamDump에서는IBM 인증000-736시험대비덤프를 출시하여 여러분이 IT업계에서 더 높은 자리에 오르도록 도움드립니다. 편한 덤프공부로 멋진 IT전문가의 꿈을 이루세요.

000-736 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-736.html

NO.1 The test database MYDB requires frequent table and index reorganization to support ongoing
application development. A database administrator obtained the following information by executing the
command GET DB CFG
FOR mydb. (Note: output has been reduced to conserve space.) Automatic maintenance (AUTO_MAINT)
= OFF Automatic database backup AUTO_DB_BACKUP) = OFF Automatic table maintenance
(AUTO_TBL_MAINT) = OFF Automatic runstats (AUTO_RUNSTATS) = OFF Automatic statistics profiling
(AUTO_STATS_PROF) = OFF Automatic profile updates (AUTO_PROF_UPD) = OFF Automatic
reorganization (AUTO_REORG) = OFF
Which commands will enable automatic table and index reorganization for the database MYDB?
A. REORG TABLE ALL FOR DB mydb AUTOMATICALLY; REORG INDEXES ALL FOR DB mydb
AUTOMATICALLY;
B. UPDATE DB CFG FOR mydb USING AUTO_MAINT ON; UPDATE DB CFG FOR mydb USING
AUTO_REORG ON;
C. UPDATE DB CFG FOR mydb USING AUTO_TABLE_MAINT ON; UPDATE DB CFG FOR mydb
USING AUTO_REORG ON;
D. RESET DB CFG FOR mydb;UPDATE DB CFG FOR mydb USING AUTO_REORG ON;
Answer: D

IBM   000-736최신덤프   000-736자료   000-736
This document was created with Win2PDF available at http://www.win2pdf.com.
The unregistered version of Win2PDF is for evaluation or non-commercial use only.
This page will not be added after purchasing Win2PDF.

NO.2 Which explanation describing the AUTOCONFIGURE command is valid?
A. The AUTOCONFIGURE command will only make recommendations based on the assumption of a
single databaseper instance.
B. When explicitly invoking the Configuration Advisor using the AUTOCONFIGURE command, the
registry setting ofDB2_ENABLE_AUTOCONFIG_DEFAULT will be honored; this variable must be set to
ON in order for the AUTOCONFIGURE command to be run successfully.
C. The AUTOCONFIGURE command does not require an explicit database connection.
D. When using the BUFFERPOOL keyword and a value of 50, AUTOCONFIGURE will tell DB2 to use 50%
of the database shared memory for the buffer pools.
Answer:A

IBM   000-736 dump   000-736   000-736최신덤프   000-736인증

NO.3 A database administrator needs to obtain the self tuning settings for a database named MYDB. Which
command should be issued?
A. db2set -all
B. GET DBM CFG SHOW DETAIL
C. GET DB CFG FOR mydb SHOW DETAIL
D. LIST MEMORY SETTINGS FOR mydb
Answer: C

IBM   000-736   000-736자료   000-736   000-736인증

NO.4 A database administrator wishes to enable automatic table and index reorganization. Which set of
DatabaseConfiguration parameters must be set to ON for automatic table and index reorganization to be
enabled?
A. AUTO_MAINT, AUTO_REORG
B. AUTO_MAINT, AUTO_TBL_MAINT, AUTO_REORG
C. AUTO_MAINT, AUTO_RUNSTATS, AUTO_REORG
D. AUTO_TBL_MAINT, AUTO_REORG
Answer: B

IBM   000-736   000-736   000-736   000-736덤프   000-736

NO.5 Which list of keywords contains values that are all valid input parameters for the AUTOCONFIGURE
command?
A. mem_percent, workload_type, tpm, isolation
B. mem_percent, workload_type, stmm, isolation
C. workload_type, isolation, num_apps, tpm
D. mem_percent, tpm, stmm, isolation
Answer
Answer:A

IBM인증   000-736인증   000-736   000-736기출문제

NO.6 Self tuning memory simplifies the task of memory configuration by automatically setting values for
memoryconfiguration parameters and sizing buffer pools. When enabled, the memory tuner dynamically
distributes availablememory resources between _____.
A. several buffer pools
B. several memory consumers including sort, package cache, lock list areas, and buffer pools
C. several memory consumers including sort, package cache, monitor heap, and lock list areas
D. several memory consumers including load and buffer pools
Answer: B

IBM   000-736시험문제   000-736 pdf   000-736   000-736기출문제   000-736

NO.7 Which commands will set the throttling percentage for a running backup operation that has a Utility ID
of 2 for adatabase named DBTEST in an instance named DB2INST1 to 10 percent?
A. db2set UTIL_IMPACT_LIMIT=ON; SET UTIL_IMPACT_PRIORITY FOR 2 TO 10;
B. UPDATE DB CFG FOR dbtest USING UTIL_IMPACT_LIM ON; SET UTIL_IMPACT_LIM FOR 2 TO
10;
C. UPDATE DBM CFG USING UTIL_IMPACT_PRIORITY ON; SET UTIL_IMPACT_LIMIT FOR 2 TO 10;
D. UPDATE DBM CFG USING UTIL_IMPACT_LIM ON; SET UTIL_IMPACT_PRIORITY FOR 2 TO 10;
Answer: D

IBM기출문제   000-736자료   000-736   000-736덤프

NO.8 During a routine inspection of database MYDB, a database administrator obtained the following
information by
executing the command GET DB CFG FOR mydb. (Note: output has been reduced to conserve space.)
Automatic maintenance (AUTO_MAINT) = OFF Automatic database backup (AUTO_DB_BACKUP) =
OFF Automatic table maintenance (AUTO_TBL_MAINT) = OFF
Automatic runstats (AUTO_RUNSTATS) = OFFAutomatic statistics profiling (AUTO_STATS_PROF) =
OFF Automatic profile updates (AUTO_PROF_UPD) = ON Automatic reorganization (AUTO_REORG) =
ON
Which command will activate automatic statistics collection for the database MYDB?
A. UPDATE DB CFG FOR mydb USING AUTO_MAINT ON AUTO_STATS_PROF OFF
AUTO_PROF_UPD OFF
B. UPDATE DB CFG FOR mydb USING AUTO_RUNSTATS ON AUTO_STATS_PROF ON
C. UPDATE DB CFG FOR mydb USING AUTO_MAINT ON AUTO_TBL_MAINT ON AUTO_RUNSTATS
ON
D. UPDATE DB CFG FOR mydb USING AUTO_TBL_MAINT ON AUTO_STATS_PROF ON
Answer: C

IBM pdf   000-736덤프   000-736기출문제   000-736   000-736자격증

NO.9 Given the following command: BACKUP DB dbtest UTIL_IMPACT_PRIORITY 20Which command
should be executed prior to the BACKUP command in order for the backup operation to run inthrottled
mode?
A. UPDATE DB CFG FOR dbtest USING UTIL_IMPACT_LIM ON
B. UPDATE DBM CFG USING UTIL_IMPACT_LIM 100
C. UPDATE DBM CFG USING UTIL_IMPACT_PRIORITY ON
D. UPDATE DBM CFG USING UTIL_IMPACT_LIM 50
Answer: D

IBM   000-736 dump   000-736인증

NO.10 Given the following server information:Instance name: db2inst1Port number: 50000 Service name:
db2c_db2inst1Hostname: 1080:0:0:0:8:800:200C:417ADatabase: db2tcpWhich command will catalog a
node for this server?
A. CATALOG TCPIP6 NODE db2tcp 1080:0:0:0:8:800:200C:417A SERVER 50000
B. CATALOG TCPIP6 NODE db2tcp REMOTE 1080:0:0:0:8:800:200C:417A SERVER 50000
C. CATALOG TCPIP4 NODE db2tcp 1080:0:0:0:8:800:200C:417A SERVER 50000
D. CATALOG TCPIP4 NODE db2tcp REMOTE 1080:0:0:0:8:800:200C:417A SERVER 50000
Answer: B

IBM최신덤프   000-736인증   000-736   000-736

IBM 인증000-736시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의IBM 인증000-736덤프자료에 주목하세요. ITExamDump의 IBM 인증000-736덤프는 오로지 IBM 인증000-736시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.