SAP 자격증 C-TSCM42-64 시험덤프

IT업계 종사자라면 누구나 SAP 인증C-TSCM42-64시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? SAP 인증C-TSCM42-64 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테SAP 인증C-TSCM42-64시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의SAP 인증C-TSCM42-64시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

SAP C-TSCM42-64인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이SAP C-TSCM42-64인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.

ITExamDump는 IT인증자격증을 취득하려는 IT업계 인사들의 검증으로 크나큰 인지도를 가지게 되었습니다. 믿고 애용해주신 분들께 감사의 인사를 드립니다. SAP C-TSCM42-64덤프도 다른 과목 덤프자료처럼 적중율 좋고 통과율이 장난이 아닙니다. 덤프를 구매하시면 퍼펙트한 구매후 서비스까지 제공해드려 고객님이 보유한 덤프가 항상 시장에서 가장 최신버전임을 약속해드립니다. SAP C-TSCM42-64덤프만 구매하신다면 자격증 취득이 쉬워져 고객님의 밝은 미래를 예약한것과 같습니다.

시험 번호/코드: C-TSCM42-64

시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)

ITExamDump는SAP C-TSCM42-64시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의SAP C-TSCM42-64시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는SAP C-TSCM42-64시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 SAP인증 C-TSCM42-64덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제SAP인증 C-TSCM42-64시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.

ITExamDump에서 SAP인증 C-TSCM42-64덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. SAP인증 C-TSCM42-64덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.

ITExamDump의 SAP 인증 C-TSCM42-64시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 SAP 인증 C-TSCM42-64실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 SAP 인증 C-TSCM42-64실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 SAP 인증 C-TSCM42-64덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.

C-TSCM42-64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TSCM42-64.html

NO.1 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C

SAP   C-TSCM42-64   C-TSCM42-64 dumps   C-TSCM42-64   C-TSCM42-64최신덤프

NO.2 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D

SAP   C-TSCM42-64최신덤프   C-TSCM42-64자격증   C-TSCM42-64

NO.3 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D

SAP   C-TSCM42-64인증   C-TSCM42-64   C-TSCM42-64덤프

NO.4 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B

SAP자료   C-TSCM42-64   C-TSCM42-64   C-TSCM42-64자료

NO.5 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C

SAP   C-TSCM42-64 dump   C-TSCM42-64   C-TSCM42-64 dumps

NO.6 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E

SAP자료   C-TSCM42-64덤프   C-TSCM42-64덤프   C-TSCM42-64   C-TSCM42-64

NO.7 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B

SAP덤프   C-TSCM42-64최신덤프   C-TSCM42-64시험문제   C-TSCM42-64자격증   C-TSCM42-64

NO.8 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A

SAP덤프   C-TSCM42-64덤프   C-TSCM42-64   C-TSCM42-64 dumps

NO.9 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B

SAP   C-TSCM42-64시험문제   C-TSCM42-64   C-TSCM42-64   C-TSCM42-64기출문제

NO.10 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B

SAP자료   C-TSCM42-64자료   C-TSCM42-64시험문제   C-TSCM42-64

ITExamDump는 IT인증관련덤프를 제공하는 최고의 업체입니다, 덤프들은 ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 최고의 제품입니다. 그리고 우리는 온라인무료 서비스도 제공되어 제일 빠른 시간에 소통 상담이 가능합니다.