IFPUG 인증한 I40-420 덤프

다른 사이트에서도IFPUG I40-420인증시험관련 자료를 보셨다고 믿습니다.하지만 우리 ITExamDump의 자료는 차원이 다른 완벽한 자료입니다.100%통과 율은 물론ITExamDump을 선택으로 여러분의 직장생활에 더 낳은 개변을 가져다 드리며 ,또한ITExamDump를 선택으로 여러분은 이미 충분한 시험준비를 하였습니다.우리는 여러분이 한번에 통과하게 도와주고 또 일년무료 업데이트서비스도 드립니다.

IFPUG인증 I40-420시험은 인기있는 IT자격증을 취득하는데 필요한 국제적으로 인정받는 시험과목입니다. IFPUG인증 I40-420시험을 패스하려면 ITExamDump의IFPUG인증 I40-420덤프로 시험준비공부를 하는게 제일 좋은 방법입니다. ITExamDump덤프는 IT전문가들이 최선을 다해 연구해낸 멋진 작품입니다. IFPUG인증 I40-420덤프구매후 업데이트될시 업데이트버전을 무료서비스료 제공해드립니다.

IFPUG인증 I40-420시험은 IT인증시험중 가장 인기있는 시험입니다. IFPUG인증 I40-420시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 IFPUG인증 I40-420덤프로 시험준비하여 고득점으로 자격증을 따보세요.

시험 번호/코드: I40-420

시험 이름: IFPUG (Certified Function Point Specialist )

ITExamDump의IFPUG인증 I40-420시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록IFPUG인증 I40-420시험대비덤프를 제공해드립니다.

IFPUG인증 I40-420시험은 멋진 IT전문가로 거듭나는 길에서 반드시 넘어야할 높은 산입니다. IFPUG인증 I40-420시험문제패스가 어렵다한들ITExamDump덤프만 있으면 패스도 간단한 일로 변경됩니다. ITExamDump의IFPUG인증 I40-420덤프는 100%시험패스율을 보장합니다. IFPUG인증 I40-420시험문제가 업데이트되면IFPUG인증 I40-420덤프도 바로 업데이트하여 무료 업데이트서비스를 제공해드리기에 덤프유효기간을 연장해는것으로 됩니다.

I40-420 덤프무료샘플다운로드하기: http://www.itexamdump.com/I40-420.html

NO.1 Which of the following is NOT an example of the purpose of a function point count?
A. To enable comparison of functionality delivered by two applications
B. To determine maintenance support cost per function point
C. To understand the percentage of lines of code that is being reused across three different applications
D. To determine the effort and duration of a development project
Answer: C

IFPUG   I40-420인증   I40-420시험문제   I40-420   I40-420

NO.2 When counting DETs which of the following rules apply?
A. Count a DET for each recursive field on the ILF or EIF
B. Count a DET for each piece of data in an ILF or EIF required by the user to establish a relationship with
another ILF or EIF
C. Count a DET for each repeating field that is identical in format
D. Count a DET for each field that appears more than once in an ILF or EIF
Answer: B

IFPUG   I40-420기출문제   I40-420   I40-420

NO.3 What is a (are) valid example(s) of code data?
A. Substitution data
B. Static data
C. Valid values
D. All of the above
Answer: D

IFPUG덤프   I40-420시험문제   I40-420

NO.4 An EI is defined as:
A. an elementary process that processes data sent from outside the application boundary
B. control information sent from outside the user view
C. an elementary process that processes data or control information sent from outside the application's
boundary
D. All of the above
Answer: C

IFPUG   I40-420   I40-420   I40-420   I40-420자격증

NO.5 Control information is defined as data that:
A. defines an elementary process of the application being counted
B. influences an elementary process of the application being counted
C. controls an elementary process of the application being counted
D. does not influence an elementary process of the application being counted
Answer: B

IFPUG dump   I40-420자료   I40-420최신덤프   I40-420   I40-420

NO.6 "Requirements specifically requested by the user to complete an elementary process" defines which of
the following terms?
A. Control information
B. Processing logic
C. Maintain
D. User identifiable
Answer: B

IFPUG덤프   I40-420 dumps   I40-420기출문제   I40-420

NO.7 Which of the following defines the purpose of a count?
A. Provides an answer to a business question, and it is the business question that determines the
purpose
B. Influences the positioning of the application between the software under review and the surrounding
software
C. Influences the type of FP count to answer the business problem under investigation
D. Provides an input to the estimation process needed to determine the level of effort required to develop
the first release of an application
Answer: A

IFPUG   I40-420최신덤프   I40-420덤프   I40-420기출문제

NO.8 What is an elementary process?
A. The smallest unit of activity that is meaningful to the developer
B. The largest unit of activity that is meaningful to the user
C. The smallest unit of activity that is meaningful to the user
D. The largest unit of activity that is meaningful to the developer
Answer: C

IFPUG dump   I40-420덤프   I40-420 dumps   I40-420시험문제

NO.9 Which of the following statements regarding the counting scope is true?
A. It defines the set of Functional User Requirements to be included in the FP count
B. It always includes more than one application
C. It determines the purpose of the applications being counted
D. It defines a (sub) set of the modules being sized
Answer: A

IFPUG pdf   I40-420덤프   I40-420

NO.10 Which category (ies) of data entities is (are) usually identified to satisfy the Functional User
Requirements?
A. Business data
B. Reference data
C. Code data
D. Both A and B
Answer: D

IFPUG자격증   I40-420자료   I40-420   I40-420 dumps

NO.11 The primary intent of an EI is to maintain:
A. One or more ILFs or alter the behavior of the application
B. One or more ILFs
C. One or more EIFs or alter the behavior of the application
D. One or more EIFs
Answer: A

IFPUG   I40-420 dump   I40-420덤프   I40-420 pdf   I40-420 pdf   I40-420인증

NO.12 Which of the following statements is (are) true regarding an application functional size (FS)?
A. It provides a measure of the functionalities that an application provides to the user
B. It is never updated after the initial application installation
C. It is associated with an application's lifecycle
D. Both A and C
Answer: D

IFPUG   I40-420   I40-420자료   I40-420 dumps

NO.13 Which of the following is an attribute used to represent relationships of one entity to another.?
A. Primary key
B. Secondary key
C. Foreign key
D. Domestic key
Answer: C

IFPUG시험문제   I40-420   I40-420   I40-420 dumps

NO.14 Which of the following is NOT true of a boundary?
A. It encloses the logical data maintained by the application
B. It is the physical interface between the software under study and its users
C. It is dependent on the user's external business view of the application and is independent of technical
and/or implementation considerations
D. It defines what is external to the application
Answer: B

IFPUG자료   I40-420 dump   I40-420   I40-420 dumps   I40-420

NO.15 Which of the following statements regarding functional size measurement is true?
A. Early functional size measurements can never change during design and coding phase
B. It is quite normal to identify additional functionality that was not specified in the original requirements in
the form of scope creep
C. It is not necessary to update the application functional size upon completion of an enhancement.
D. Both B and C
Answer: B

IFPUG최신덤프   I40-420덤프   I40-420   I40-420

NO.16 An example of the purpose of an FP count is to provide:
A. input to the estimation process needed to determine the level of effort to develop the first release of an
application
B. a comparison of functionality delivered by two different suppliers' packages
C. determine the size of an application as part of the organization's effort to determine the size of its
software portfolio
D. All of the above
Answer: D

IFPUG   I40-420덤프   I40-420   I40-420 pdf

NO.17 What is true about conversion functionality?
A. Transactional or data functions provided to convert data and /or provide other user specified
conversion requirements
B. Exists only during the development or enhancement of an application
C. Conversion functionality is outside the scope of FP counting
D. Both A and B
Answer: D

IFPUG시험문제   I40-420최신덤프   I40-420   I40-420   I40-420기출문제   I40-420기출문제

NO.18 What is a user identifiable group of logically related data or control information referenced by the
application, but maintained within the boundary of another application?
A. An ILF
B. An IIF
C. An EIF
D. An ELF
Answer: C

IFPUG   I40-420   I40-420 pdf

NO.19 Which of the following statements about an External Input is true?
A. Has the primary intent to maintain one or more ILFs
B. An elementary process to hold data or control information from outside the boundary
C. Has the primary intent to alter the behavior of a transaction
D. Has the primary intent to reference one or more EIFs
Answer: A

IFPUG   I40-420 dump   I40-420   I40-420기출문제

NO.20 An application FP count is defined as:
A. a measure of the current functions the application provides the user
B. the initial development project FP count
C. an enhancement project that alters the applications functions
D. the activity of applying this International Standard to measure the functional size of an application
Answer: D

IFPUG   I40-420   I40-420최신덤프

ITExamDump의 덤프선택으로IFPUG I40-420인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.